CJ Motorsports VHR Intake Manifold

DEpointfive0 · 05-16-2015, 01:37 AM

Quote:

Originally Posted by Elmo370z

Honest opinion do you think your manifold will produce decent gains for NA set up, More so than motor dyne and z1 modded manifold's?

How much gains are decent? Peak or under the curve?

Elmo370z · 05-16-2015, 10:14 AM

Quote:

Originally Posted by DEpointfive0

How much gains are decent? Peak or under the curve?

Peak. With the other dynos I've seen, the other manifolds make great power under the curve but loss a lot up top.

phunk · 05-16-2015, 04:49 PM

I am making the runners a tad longer which should help midrange torque, which is all that can really be done for the NA... I dont know that there is much to gain on the top end in intake manifolds without spinning the engine much higher.

Elmo370z · 05-16-2015, 05:44 PM

Quote:

Originally Posted by phunk

I am making the runners a tad longer which should help midrange torque, which is all that can really be done for the NA... I dont know that there is much to gain on the top end in intake manifolds without spinning the engine much higher.

That's what i figured. When do you think the launch date will be?

phunk · 05-16-2015, 08:00 PM

I am not sure yet when they will be ready to go. Once production begins, it will go very quickly. But it hasnt begun yet.

ANMVQ · 05-17-2015, 07:58 AM

Charles can you please include me in on this! I can add this to the two test Ive done with the Z1 and the M370. I still have a ported M370 that I'm debating on putting on the car or selling. :/

Elmo370z · 05-17-2015, 10:41 AM

Yes please.

AntiVenom · 05-17-2015, 11:31 AM

don't know how i missed this... sub'd

Elmo370z · 05-17-2015, 05:42 PM

So maybe you could contact Sam from gtm and have 1slow370z prototype fitted to a car to test your manifold on a well suited na Z? This is what a community does.

Jordo! · 05-17-2015, 07:21 PM

I'd be onboard for a IM that made substantially more torque off the line (say, 15 - 20 wtq) even if top end was unchanged.

That might be wishful thinking tho'...

jrb55gh · 05-17-2015, 09:40 PM

Quote:

Originally Posted by ANMVQ

Zero !

M370 actually made more everywhere ex top end where they made the same. I think I need a return for the Z1 but from a just swap and go Z1 lost.

Car was tuned with the M370.

Can you post the test results for the Z1 and M370?

Asheth · 05-17-2015, 09:49 PM

Quote:

Originally Posted by jrb55gh

Can you post the test results for the Z1 and M370?

He has a thread in this forum about 6 pages long with all 3. He chose the Z1 mani and sold his ported M370 and regular M370.

Here you go Up coming Intake manifold testing .

370Z JT · 05-18-2015, 12:07 AM

I like what the future holds. GTM, Doran, and CJM all have intake manifolds in the works. Let's get them released!

ANMVQ · 05-18-2015, 03:31 PM

Quote:

Originally Posted by Asheth

He has a thread in this forum about 6 pages long with all 3. He chose the Z1 mani and sold his ported M370 and regular M370.

Here you go Up coming Intake manifold testing .

Thanx man!

not entirly true tho, I still have the ported M370 and another regular one . The ported one I decided to keep. LOL I'm thinking of putting the ported one the car after the 6th of June, Dyno with Z1 and ported lower.

ANMVQ · 05-18-2015, 09:11 PM

Quote:

Originally Posted by 370Z JT

I like what the future holds. GTM, Doran, and CJM all have intake manifolds in the works. Let's get them released!

The only hope on that list is CJM. GTM will never release theirs and if they do they going to have to give them away for what they did to people

05-16-2015, 04:49 PM	#273 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	I am making the runners a tad longer which should help midrange torque, which is all that can really be done for the NA... I dont know that there is much to gain on the top end in intake manifolds without spinning the engine much higher. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

05-16-2015, 08:00 PM	#275 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,668 Drives: 370 Rep Power: 974723	I am not sure yet when they will be ready to go. Once production begins, it will go very quickly. But it hasnt begun yet. Elmo370z and Jimbo370 like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

05-17-2015, 07:58 AM	#276 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Charles can you please include me in on this! I can add this to the two test Ive done with the Z1 and the M370. I still have a ported M370 that I'm debating on putting on the car or selling. :/ __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

05-17-2015, 11:31 AM	#278 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 11	don't know how i missed this... sub'd __________________ The GREY GHOST Chronicle instagram: jdmunilla

05-17-2015, 05:42 PM	#279 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	So maybe you could contact Sam from gtm and have 1slow370z prototype fitted to a car to test your manifold on a well suited na Z? This is what a community does. gomer_110 likes this.

05-17-2015, 10:41 AM	#277 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,709 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	Yes please.

05-17-2015, 07:21 PM	#280 (permalink)
Jordo! A True Z Fanatic Join Date: May 2010 Location: nirvana Posts: 6,394 Drives: 2023 NATM Rep Power: 418	I'd be onboard for a IM that made substantially more torque off the line (say, 15 - 20 wtq) even if top end was unchanged. That might be wishful thinking tho'... AntiVenom likes this. __________________ Enjoy it. Destroy it.

05-18-2015, 12:07 AM	#283 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	I like what the future holds. GTM, Doran, and CJM all have intake manifolds in the works. Let's get them released! __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intake manifold project	Dwnshift	Intake/Exhaust	119	05-17-2015 02:37 AM
Z1 Motorsports: Metal HR/VHR Manifold 3 Bolt Gasket	John@Z1	Exhaust/Intake	27	09-09-2013 06:40 PM
ID this intake manifold	Japanjay	Intake/Exhaust	5	07-27-2013 07:31 PM
[FOR SALE] OEM intake manifold	seymore4	Parts for sale (Private Classifieds)	5	02-24-2012 06:17 PM
gtr intake Manifold on 370z !!	indyn	Intake/Exhaust	5	06-01-2011 09:06 AM