Dyno on G37 Stillen G3 vs. RC2

jpit · 08-26-2009, 05:31 PM

Oiled filters use oil to help captured dust and dirt. You need to clean and re-oil them every so often. Apparently, if you use too much oil it can be fed into the intake and coat some of the sensors causing them to misread. Dry filters you can clean with a good shake and some low psi compressed air.

JoeD · 08-26-2009, 06:56 PM

You forgot to mention that dry filters have a tendency to break apart and get sucked into the engine.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
STILLEN Longtube G3 Intakes. Review, Dyno and Impressions.	RCZ	Intake/Exhaust	270	06-03-2015 02:25 PM
Stillen Underdrive Pulley - Review/Pics/Dyno/Vid	semtex	Engine & Drivetrain	73	11-24-2014 01:25 AM
Stillen Headers installed - Review/Pics/Vid/Dyno	semtex	Intake/Exhaust	120	06-25-2014 12:15 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 12:41 PM
STILLEN Needs a Stock 370Z - Free Installation and Dyno for Testing	Josh@STILLEN	Nissan 370Z General Discussions	24	06-11-2009 07:49 PM

08-26-2009, 05:31 PM	#1 (permalink)
jpit Enthusiast Member Join Date: Feb 2009 Location: Washington State Posts: 440 Drives: 370Z Tour MT w/Spt Rep Power: 18	Oiled filters use oil to help captured dust and dirt. You need to clean and re-oil them every so often. Apparently, if you use too much oil it can be fed into the intake and coat some of the sensors causing them to misread. Dry filters you can clean with a good shake and some low psi compressed air.

08-26-2009, 06:56 PM	#2 (permalink)
JoeD Banned Join Date: Aug 2009 Location: CA Posts: 495 Drives: Z Rep Power: 0	You forgot to mention that dry filters have a tendency to break apart and get sucked into the engine.