$$$ Test Pipe Install $$$

Grindkiezer · 05-18-2013, 06:23 PM

Yeah you can pick up an OBD2 scanner at Autozone for about $50, you'll have to look up the codes somewhere else, but at least you can erase codes that pop up which is the only reason I bought it

MJB · 05-18-2013, 06:25 PM

Quote:

Originally Posted by Grindkiezer

Yeah I'm starting to wish I did that as well. Just scanned my ECU and got back P2A03 so something is going on with my O2 sensors. I checked my test pipes today and did se that they had some scuff marks on them (From speed bumps) but when I turned the car on there were no evident leaks.

My question is now what do I do about my O2 sensors? I cleared the code but I figure it's now only a matter of time. Could the sensor be fouled from running too rich?

Uprev tune and you'll never have to worry about those codes ever again.

Grindkiezer · 05-18-2013, 06:34 PM

Quote:

Originally Posted by MJB

Uprev tune and you'll never have to worry about those codes ever again.

Ha would you be able to get me a price for that?
The way I see it, is if I didn't have the money for HFC where would I get the money for an Uprev license?

MJB · 05-18-2013, 06:44 PM

Quote:

Originally Posted by Grindkiezer

Ha would you be able to get me a price for that?
The way I see it, is if I didn't have the money for HFC where would I get the money for an Uprev license?

Have no idea what your financial situation is,... buy yeah a tune is initially pretty expensive. Thats what happens though with going HFCs or TPs without a tune. Cels seem to become inevitable.

Grindkiezer · 05-18-2013, 06:47 PM

Cause I know that Uprev has an the Osiris base tune for $100 bucks so that's not bad at all but I'm not sure if that's what I need or if I even need something else

MJB · 05-18-2013, 06:50 PM

Oh, I forgot to mention, I got a CEL after I had TPs, can't remember the specific code but it was due to an exhaust leak. I used high temp copper sealant on all the exhaust flanges along with the gaskets and everything was good to go. But after my tune I'm good to go anyways.

Ronin06 · 06-15-2014, 08:47 AM

Quote:

Originally Posted by olddudesrule

I gotta say, I don't know why you go to the trouble of test pipes when you can get virtually the same tone/volume from a good set of HFC's?? I've used them on two Z06's and an 02 Viper GTS, and never looked back. Emissions tests were also a consideration, and all cars were tuned with HP Tuners software.

Not trying to sound like a hater, just wondering why you'd go through the issues associated with removing the cats unless you're building a full on track car.

HP Tuners software? Nissan is not supported per their website.

05-18-2013, 06:23 PM	#31 (permalink)
Grindkiezer Track Member Join Date: Sep 2012 Location: San Diego Posts: 824 Drives: A Car Rep Power: 13	Yeah you can pick up an OBD2 scanner at Autozone for about $50, you'll have to look up the codes somewhere else, but at least you can erase codes that pop up which is the only reason I bought it __________________ Z

05-18-2013, 06:47 PM	#35 (permalink)
Grindkiezer Track Member Join Date: Sep 2012 Location: San Diego Posts: 824 Drives: A Car Rep Power: 13	Cause I know that Uprev has an the Osiris base tune for $100 bucks so that's not bad at all but I'm not sure if that's what I need or if I even need something else __________________ Z

05-18-2013, 06:50 PM	#36 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 40 Posts: 1,498 Drives: a POS truck Rep Power: 495	Oh, I forgot to mention, I got a CEL after I had TPs, can't remember the specific code but it was due to an exhaust leak. I used high temp copper sealant on all the exhaust flanges along with the gaskets and everything was good to go. But after my tune I'm good to go anyways. __________________ 09 Nismo #0483 sold. Viper or C7 next time around.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Test pipe install shop?	370zmarc	Southern California Region	6	08-24-2012 12:58 PM
Gen 3 Intake - Topspeed Test Pipe Install?	rhd	Intake/Exhaust	3	08-06-2012 11:14 PM
Philly area shop for test pipe install?	TonyBPD	North East Region	10	07-10-2011 01:11 PM
Help CNT Racing Test Pipe Install Issue	fairladyZ34	Intake/Exhaust	14	04-18-2011 02:28 PM
Berk Test Pipe install...*^$#ing factory bolts!!!	mjohn617	Intake/Exhaust	76	01-30-2011 04:41 PM