Hey Z1. ETA on those headers?

Eighties Meta · 08-12-2013, 10:43 PM

Well, I'm back in MD now and my z1 header install and de test pipes will occur on 8/19 and run 2 or 3 days inclulding the retune at AAM. Im surprised that there are still no results in this thread yet there will be next week

Hoping to see a gain from 317whp to something over 330whp. Original tune and dyno done at aam so should be perfect for comparison of gains from the mods.

Sent from my GT-N8013 using Tapatalk 2

Joepro · 08-13-2013, 12:02 PM

Well all tuned up...wasn't the best peak numbers...but they found me some good gains...322 HP 270 tq...based at 306.

2sl0w · 08-13-2013, 01:15 PM

Nice results joepro do you have a pic if the dyno sheet? How's does it feel on the street ?

Sent from my SAMSUNG-SGH-I717 using Tapatalk 4

Joepro · 08-13-2013, 01:40 PM

I do... Driving home now I'll up a graph when I her home... Feels fantastic!

Eighties Meta · 08-13-2013, 05:45 PM

Sweet. Peak is still a damn good gain for you. Looking forward to the remaining info.

Sent from my GT-N8013 using Tapatalk 2

Joepro · 08-13-2013, 06:27 PM

Joepro · 08-13-2013, 06:31 PM

I knew there was an issue at 5500... I've been aware of it as have my friends from hearing me complain.... At least I wasn't crazy.

Eighties Meta · 08-13-2013, 06:38 PM

Just want to make sure this was the headers and a retune? Anything else?

Sent from my GT-N8013 using Tapatalk 2

Joepro · 08-13-2013, 06:58 PM

I do not have a pre header tune...I was Hoping for 330, it was my goal, however with talking with Vince he said the only ones that dyno higher for them are the ones with long tubes, I did not think there would be that much of a difference between these and long tubes...My torque I though was quite good. I have takeda long tube intakes, the z1 headers, motordyne art pipes and fast intentions exhaust. and M370 manifold. I looked through rt's tuning videos, most of the 370z first pull was average of 300, so I based a tad higher, and most they said were high teens in the 300s...I might also hit a local dyno(they do not tune) and see if I get similar results, every dyno is different, but I can tell you I felt butt dyno results with install of the headers, so regardless of the numbers my feel is they are worth it, and I plan on supercharging in the next year, and the stock header design is restrictive.

DEpointfive0 · 08-13-2013, 07:09 PM

But did you have art pipes before as well?

Chuck33079 · 08-13-2013, 07:15 PM

Quote:

Originally Posted by Joepro

I do not have a pre header tune...I was Hoping for 330, it was my goal, however with talking with Vince he said the only ones that dyno higher for them are the ones with long tubes, I did not think there would be that much of a difference between these and long tubes...My torque I though was quite good. I have takeda long tube intakes, the z1 headers, motordyne art pipes and fast intentions exhaust. and M370 manifold. I looked through rt's tuning videos, most of the 370z first pull was average of 300, so I based a tad higher, and most they said were high teens in the 300s...I might also hit a local dyno(they do not tune) and see if I get similar results, every dyno is different, but I can tell you I felt butt dyno results with install of the headers, so regardless of the numbers my feel is they are worth it, and I plan on supercharging in the next year, and the stock header design is restrictive.

That manifold's costing you peak power and giving you more area under the curve.

It's also August. $5 says you'll hit your power goal if you go back in the winter.

Joepro · 08-13-2013, 07:25 PM

Under the curve is where it counts to me...the art pipes went on a week after the headers to combat the test pipe rasp.

DEpointfive0 · 08-13-2013, 07:34 PM

Quote:

Originally Posted by Joepro

Under the curve is where it counts to me...the art pipes went on a week after the headers to combat the test pipe rasp.

I'm just curious as if you had TPs before as well, or if the mod list was headers, TPs and a tune, or just headers, DE TPs and tune

370Z JT · 08-13-2013, 07:35 PM

Yea. Take off the manifold and you will get around +10 peak (from my experience). 330WHP is where you would be if you did.

IIRC, Mike does not run the M370, and achieved 342, albeit on a different dyno.

Chuck33079 · 08-13-2013, 07:43 PM

Quote:

Originally Posted by Joepro

Under the curve is where it counts to me

Absolutely. Ill happily give up 5-10 up top for the increase in mid range power. You spend a lot more time in that part of the power band.

08-12-2013, 10:43 PM	#331 (permalink)
Eighties Meta Enthusiast Member Join Date: Aug 2012 Location: Pasadena, MD Age: 54 Posts: 344 Drives: 09 370z 7AT no-sport Rep Power: 12	Well, I'm back in MD now and my z1 header install and de test pipes will occur on 8/19 and run 2 or 3 days inclulding the retune at AAM. Im surprised that there are still no results in this thread yet there will be next week Hoping to see a gain from 317whp to something over 330whp. Original tune and dyno done at aam so should be perfect for comparison of gains from the mods. Sent from my GT-N8013 using Tapatalk 2 370Z JT and DarkJak like this. __________________ 2009 370z Touring 7AT/AAM 2.5 true dual exhaust/AAM DE test pipes/z1 vqde35 headers/AAM cold air intake (R-line)/Motordyne M370/Quaife LSD/z1 brake upgd pkg/Swift Spec-R springs/WhiteLine Front&Rear sway bars with endlinks

08-13-2013, 12:02 PM	#332 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Well all tuned up...wasn't the best peak numbers...but they found me some good gains...322 HP 270 tq...based at 306. XwChriswX and mag_black like this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

08-13-2013, 01:15 PM	#333 (permalink)
2sl0w Base Member Join Date: Feb 2013 Location: Atlanta Posts: 106 Drives: 09 370z Sport Rep Power: 12	Nice results joepro do you have a pic if the dyno sheet? How's does it feel on the street ? Sent from my SAMSUNG-SGH-I717 using Tapatalk 4 __________________ \|\| Z1 Intake, SS Lines, Silicone Hoses, Hood Struts, 25 Row Oil Cooler+T.Plate, Two Piece Rotors, Uprev \|\| Motordyne M370 + A.R.T. Pipes + XYZ w/ HFC, Tomei Expreme TI Exhaust, NST, Whiteline Diff Bushings, Nismo Sways, BC BR 12k/10K, SPC F/R Arms, ZSpeed Shroud, Competition Clutch Stage 2 Kit, 20" Advan RSD, White Akebonos by Mike \|\|

08-13-2013, 01:40 PM	#334 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	I do... Driving home now I'll up a graph when I her home... Feels fantastic! __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

08-13-2013, 05:45 PM	#335 (permalink)
Eighties Meta Enthusiast Member Join Date: Aug 2012 Location: Pasadena, MD Age: 54 Posts: 344 Drives: 09 370z 7AT no-sport Rep Power: 12	Sweet. Peak is still a damn good gain for you. Looking forward to the remaining info. Sent from my GT-N8013 using Tapatalk 2 __________________ 2009 370z Touring 7AT/AAM 2.5 true dual exhaust/AAM DE test pipes/z1 vqde35 headers/AAM cold air intake (R-line)/Motordyne M370/Quaife LSD/z1 brake upgd pkg/Swift Spec-R springs/WhiteLine Front&Rear sway bars with endlinks

08-13-2013, 06:27 PM	#336 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	__________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

08-13-2013, 06:31 PM	#337 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	I knew there was an issue at 5500... I've been aware of it as have my friends from hearing me complain.... At least I wasn't crazy. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

08-13-2013, 06:38 PM	#338 (permalink)
Eighties Meta Enthusiast Member Join Date: Aug 2012 Location: Pasadena, MD Age: 54 Posts: 344 Drives: 09 370z 7AT no-sport Rep Power: 12	Just want to make sure this was the headers and a retune? Anything else? Sent from my GT-N8013 using Tapatalk 2 __________________ 2009 370z Touring 7AT/AAM 2.5 true dual exhaust/AAM DE test pipes/z1 vqde35 headers/AAM cold air intake (R-line)/Motordyne M370/Quaife LSD/z1 brake upgd pkg/Swift Spec-R springs/WhiteLine Front&Rear sway bars with endlinks

08-13-2013, 06:58 PM	#339 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	I do not have a pre header tune...I was Hoping for 330, it was my goal, however with talking with Vince he said the only ones that dyno higher for them are the ones with long tubes, I did not think there would be that much of a difference between these and long tubes...My torque I though was quite good. I have takeda long tube intakes, the z1 headers, motordyne art pipes and fast intentions exhaust. and M370 manifold. I looked through rt's tuning videos, most of the 370z first pull was average of 300, so I based a tad higher, and most they said were high teens in the 300s...I might also hit a local dyno(they do not tune) and see if I get similar results, every dyno is different, but I can tell you I felt butt dyno results with install of the headers, so regardless of the numbers my feel is they are worth it, and I plan on supercharging in the next year, and the stock header design is restrictive. cdoxp800 likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

08-13-2013, 07:09 PM	#340 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	But did you have art pipes before as well? __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

08-13-2013, 07:25 PM	#342 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	Under the curve is where it counts to me...the art pipes went on a week after the headers to combat the test pipe rasp. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

08-13-2013, 07:35 PM	#344 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 378	Yea. Take off the manifold and you will get around +10 peak (from my experience). 330WHP is where you would be if you did. IIRC, Mike does not run the M370, and achieved 342, albeit on a different dyno. __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AMS Headers	SPOHN	Intake/Exhaust	24	12-20-2012 12:16 AM
Install Video/Sound Clip: FI headers/cat-back/HFC...yes headers AND HFC.	M.Bonanni	Intake/Exhaust	30	08-07-2012 10:07 AM
[WTB] Headers	Dwv2005	Parts for sale (Private Classifieds)	3	02-29-2012 07:17 PM
headers	Ricardo2.0	Wanted	0	01-24-2012 12:37 AM
Headers	Paladinjc	Intake/Exhaust	12	04-08-2011 05:36 PM