Intake Air Temperatures

Zsteve · 04-04-2010, 09:29 PM

Modshack with bolt ons and a tune would your MAF still be of use? Its to lean the car out some right? So is that still a good idea after a tune?

Modshack · 04-04-2010, 09:45 PM

Quote:

Originally Posted by Zsteve

Modshack with bolt ons and a tune would your MAF still be of use? Its to lean the car out some right? So is that still a good idea after a tune?

No need as a tune shoulld be making those adjustments....The MAF tubes are just mechanically leaning the car a bit as opposed to a programming change within the ECU when done by a tune..

Zsteve · 04-04-2010, 10:20 PM

Quote:

Originally Posted by Modshack

No need as a tune shoulld be making those adjustments....The MAF tubes are just mechanically leaning the car a bit as opposed to a programming change within the ECU when done by a tune..

thanks

JvKintheUSA · 06-09-2010, 09:11 PM

On my drive home tonight I measured +6F over ambient temp. Not bad IMO. Sorry for the bad pic.

juld0zer · 02-06-2013, 05:24 PM

Hey modshack, how are the IATs at idle/standstill with the aluminium MAF housing?
The stock plastic pipe gets very hot already so i imagine things might be a little warmer with a metal one.

Modshack · 02-07-2013, 07:28 AM

Quote:

Originally Posted by juld0zer

Hey modshack, how are the IATs at idle/standstill with the aluminium MAF housing?
The stock plastic pipe gets very hot already so i imagine things might be a little warmer with a metal one.

Old post, but if you set the car up to forcefeed some cool air through the Fang vents, IAT's will stay relatively low. I haven't had this car for a few years now, but I don't recall much difference from stock (on the material anyway)

04-04-2010, 09:29 PM	#61 (permalink)
Zsteve A True Z Fanatic Join Date: Sep 2009 Location: TX Posts: 3,298 Drives: the 2 balled club Rep Power: 21	Modshack with bolt ons and a tune would your MAF still be of use? Its to lean the car out some right? So is that still a good idea after a tune? __________________ 2010 LS3 C6 Silver coupe corvette

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intake?	AG370z	Intake/Exhaust	5	05-10-2009 08:37 PM
New Intake/Exhausts	BPAuto	Intake/Exhaust	10	03-18-2009 07:58 PM

02-06-2013, 05:24 PM	#65 (permalink)
juld0zer Enthusiast Member Join Date: Nov 2012 Location: Sydney Posts: 428 Drives: 11 Nissan 370Z MB M6 Rep Power: 138	Hey modshack, how are the IATs at idle/standstill with the aluminium MAF housing? The stock plastic pipe gets very hot already so i imagine things might be a little warmer with a metal one.