Fast Intentions exhaust is here!

Specialk84 · 10-03-2011, 09:20 PM

I felt the same way but quickly realized that when I took in my z for maintenance they didn't do anything so I put the gen 3 on myself and said the hell with the warranty. Plus you can't see the incision if you put the stock airboxes back on cause you need to take off the bumper

XwChriswX · 10-03-2011, 09:22 PM

Ok, I don't know if I could have it for myself, but my god is that FI SCREAMING!!!

Sex bro.

I'm surprised to shop let you get behind the car up on a dyno like that, most places I've been to keep you back away... Awesome vid. I need tissues meow. brb.

jnaut · 10-03-2011, 09:24 PM

Quote:

Originally Posted by XwChriswX

I'm thinking have the limiter removed, and having redline moved to 8k and see if we can pull out some higher topend...

My car liked to rev higher as mine made on a mustang dyno 320@ 7940 rpm. so with my 4.08 gears and higher redline it was a blast to rip through the gears. as for the topend, we gps my car @ 168mph

allmotor

Glokwork · 10-03-2011, 09:25 PM

Quote:

Originally Posted by XwChriswX

Ok, I don't know if I could have it for myself, but my god is that FI SCREAMING!!!

Sex bro.

I'm surprised to shop let you get behind the car up on a dyno like that, most places I've been to keep you back away... Awesome vid. I need tissues meow. brb.

Nah it was all good, that shop and the tuner rules. Yes it was definitely screaming, but I gotta have it louder and I know just the thing to do that.

XwChriswX · 10-04-2011, 12:32 AM

Quote:

Originally Posted by jnaut

My car liked to rev higher as mine made on a mustang dyno 320@ 7940 rpm. so with my 4.08 gears and higher redline it was a blast to rip through the gears. as for the topend, we gps my car @ 168mph

allmotor

Ugh, I don't know if I wanna do the 4.08 gears with the 7AT or not... I might try to do a manual pumpkin swap at least since its got a better ratio than the AT, but hmmmmmmmmm...

Quote:

Originally Posted by Glokwork

Nah it was all good, that shop and the tuner rules. Yes it was definitely screaming, but I gotta have it louder and I know just the thing to do that.

Take the exhaust off all together and run with straight dump tubes from the exhaust manifold??

edconline · 10-04-2011, 01:05 AM

Quote:

Originally Posted by Glokwork

Nah it was all good, that shop and the tuner rules. Yes it was definitely screaming, but I gotta have it louder and I know just the thing to do that.

Let me know what you end up doing. I'm worried mine (Non-res with berk TP's) may not be loud enough once i install it, then i'll only be left with the GTHAUS as an option. I'd rather not go down that road if possible as it's not clear whether the GTHAUS makes anywhere near the same gains as the F.I. Not sure if I am willing to sacrifice much power for sound.

Vapiano · 10-05-2011, 06:59 PM

Quote:

Originally Posted by Glokwork

that shop and the tuner rules.

Glokwork, can you please send me the information on the shop/tuner you used?

Thanks,

V

Glokwork · 10-05-2011, 07:44 PM

Quote:

Originally Posted by Vapiano

Glokwork, can you please send me the information on the shop/tuner you used?

Thanks,

V

CIN Motorsports
Ben is the NA UpRev tuner there and a genius at what he does
4510-B Rozzelle's Ferry Rd
Charlotte, NC 28216
704-523-6700 9am-6pm
Sean can set you up with Ben 7 days a week
Also this a new bad *** mustang dyno btw

Vapiano · 10-05-2011, 08:15 PM

Quote:

Originally Posted by Glokwork

CIN Motorsports
Ben is the NA UpRev tuner there and a genius at what he does
4510-B Rozzelle's Ferry Rd
Charlotte, NC 28216
704-523-6700 9am-6pm
Sean can set you up with Ben 7 days a week
Also this a new bad *** mustang dyno btw

Thanks! I have not been to Charlotte in a while, I used to hang out there every weekend when stationed at Camp Lejeune. I will call CIN this week.

V

Glokwork · 10-05-2011, 08:34 PM

Quote:

Originally Posted by Vapiano

Thanks! I have not been to Charlotte in a while, I used to hang out there every weekend when stationed at Camp Lejeune. I will call CIN this week.

V

No problem man, they are an exceptional shop. Ben is even coming up here next month to check in and make any adjustments I might want.

alejo · 10-06-2011, 03:33 PM

ANY updates??? I'm #379 and haven't heard anything from Tony

Proshop01 · 10-06-2011, 06:03 PM

I emailed Tony yesterday and was told mine would ship out late next week. I am #380.

_CEO_ · 10-06-2011, 06:18 PM

I was #371 and mine arrived at my gf's yesterday morning.

Tommy G · 10-06-2011, 08:42 PM

Im # 374 and my tracking says it will arrive tomorrow!

FPenvy · 10-06-2011, 09:59 PM

#373 arrived today already installed. sounds amazing. took me 3 hours to get my cats off due to nissan's insane bolts holding them to the headers but only took 15 minutes to put the CBE exhaust on. tony all i can say is thank you lol. so far no problems. slight air escaping? sound when im letting off not sure bout that going to look into it tomorrow. sounds sick tho so hopefully its nothing bad. pics were taken camera is dead so i will post tomorrow along with hopefully a video if i have time before i go away for the weekend.

10-03-2011, 09:22 PM	#6602 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	Ok, I don't know if I could have it for myself, but my god is that FI SCREAMING!!! Sex bro. I'm surprised to shop let you get behind the car up on a dyno like that, most places I've been to keep you back away... Awesome vid. I need tissues meow. brb. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

10-06-2011, 06:03 PM	#6612 (permalink)
Proshop01 Base Member Join Date: May 2011 Location: Ohio Posts: 56 Drives: 2011 370Z Roadster Rep Power: 15	I emailed Tony yesterday and was told mine would ship out late next week. I am #380. __________________ 2011 Roadster, Gun Metallic, Sport Package, Touring Package, Stillen G3 Cold Air Intake, Fast Intentions SS 18" Resonators CBE, H&R 20mm spacers, Stubby antenna, Z1 Hood Struts, Smart TOP.

10-06-2011, 08:42 PM	#6614 (permalink)
Tommy G Base Member Join Date: Jul 2011 Location: Suffolk, NY Posts: 57 Drives: 09 370z PW MT6 SPT Rep Power: 15	Im # 374 and my tracking says it will arrive tomorrow! __________________ Injen Long Tubes\|FI TDX CBE#374\|B&M Short Throw Shifter\|Nismo Polished Aluminum Knob\|Stillen 19 Row Oil Cooler\|20% Tint with Front Windshield Strip\|Michelin Pilot Super Sport

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	Venomous01	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	01-25-2013 09:27 AM
the Fast and the....	arcticreaver	The Lounge (Off Topic)	1	05-04-2009 04:48 PM
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	zero	Nissan 370Z Photos / Spyshots / Video / Media Gallery	33	02-26-2009 09:14 PM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 06:35 AM

10-03-2011, 09:20 PM	#6601 (permalink)
Specialk84 Base Member Join Date: Sep 2011 Location: San Diego Posts: 3 Drives: 09 370z bl m6 Rep Power: 14	I felt the same way but quickly realized that when I took in my z for maintenance they didn't do anything so I put the gen 3 on myself and said the hell with the warranty. Plus you can't see the incision if you put the stock airboxes back on cause you need to take off the bumper

10-06-2011, 03:33 PM	#6611 (permalink)
alejo Base Member Join Date: May 2010 Location: Pensacola, FL Posts: 107 Drives: 10 T/S,NAV,MT, 08 R6 Rep Power: 16	ANY updates??? I'm #379 and haven't heard anything from Tony

10-06-2011, 06:18 PM	#6613 (permalink)
_CEO_ Base Member Join Date: Jan 2011 Location: Jacksonville Fl Posts: 64 Drives: 09 370z MB M6 Rep Power: 15	I was #371 and mine arrived at my gf's yesterday morning.