Fast Intentions exhaust is here!

Jquad · 10-10-2010, 09:16 PM

Quote:

Originally Posted by ProfessorDave

So I'm just over 1 week installed. I went over a series of very high speed bumps today. I went slow, and there was no problem with clearance. In fact, the front spoiler guards (or whatever those black pieces are called below the front lip) scraped a little on the highest bump, but there was no scraping whatsoever on the mufflers.

Keep in mind I'm stock height with 18" rims. But I just wanted to post for those worried about clearance...No worries!

thats good to know thnx

xdeslitx · 10-11-2010, 01:42 PM

Installing on Friday. Whoo-hoo!

Trips · 10-11-2010, 06:52 PM

Quote:

Originally Posted by xdeslitx

Installing on Friday. Whoo-hoo!

You won't be disappointed!

xdeslitx · 10-11-2010, 07:04 PM

Quote:

Originally Posted by Triple's

You won't be disappointed!

I'm very antsy already! Can't wait to hear it as we're driving the canyons.

Trips · 10-11-2010, 07:25 PM

Quote:

Originally Posted by xdeslitx

I'm very antsy already! Can't wait to hear it as we're driving the canyons.

We need to find a route with a tunnel or two.

xdeslitx · 10-11-2010, 07:26 PM

Quote:

Originally Posted by Triple's

We need to find a route with a tunnel or two.

I'm getting tempted to drive to LAX just to hear it under a long tunnel, but there's lots of cops there

Trips · 10-11-2010, 07:27 PM

Quote:

Originally Posted by xdeslitx

I'm getting tempted to drive to LAX just to hear it under a long tunnel, but there's lots of cops there

Yea thats a nice one, but you're right, too may smokies. ftl

tjlazer · 10-12-2010, 11:58 PM

Got mine today! Installed it tonight and it's perfect. 18" Resonators with ERZ HFC's and it sounds awesome! Matter of fact, I could have even gone with the 12"! But then again I went from having the Meisterschaft to the FI....

Only issue so far is the tips are not aligned even. Left side is lower than right. What are you all doing to fix this issue???

EDIT: added 3 small washers to each bolt on the right side which was sitting higher. Now it's even.

shawn84 · 10-13-2010, 12:14 AM

Quote:

Originally Posted by tjlazer

Got mine today! Installed it tonight and it's perfect. 18" Resonators with ERZ HFC's and it sounds awesome! Matter of fact, I could have even gone with the 12"! But then again I went from having the Meisterschaft to the FI....

Only issue so far is the tips are not aligned even. Left side is lower than right. What are you all doing to fix this issue???

I've heard customers had this issue many times...and I know its easy to fix. but I'm just wondering why FI keep building exhaust that has the problem.. is it hard to build exhaust without the problem @ first place?

ProfessorDave · 10-13-2010, 06:18 AM

You must really like a LOUD exhaust!

Shim the muffler hanger (all three bolt, where the hanger attaches to the undercarriage) with washers on the high side.

I can't complain about tip alignment - mine were perfect, no shimming. And from what I've read tip misalignment is far more common on other brands.

Brazilian Z · 10-13-2010, 07:51 AM

Tony, where are you?

I'm really afraid now...

ProfessorDave · 10-13-2010, 11:27 AM

Quote:

Originally Posted by Brazilian Z

Tony, where are you?

I'm really afraid now...

As a recent installer, I can tell you THERE IS NOTHING TO WORRY ABOUT! Even if you have to shim, it is very easy. You can get to the muffler hangers easily without lifting the car. A ratchet, extension, and 12mm socket and some 1/4" (or maybe 3/8") washers, and you're done.

xdeslitx · 10-13-2010, 11:53 AM

Quote:

Originally Posted by Brazilian Z

Tony, where are you?

I'm really afraid now...

When i spoke to him he told me that his account expired and he is trying to get back on the forums

tjlazer · 10-13-2010, 11:59 AM

Well I think the hanger needs to be adjusted. I wonder how easy I can bend it? I also noticed one tip sticks out further than the other. But my other exhaust did the same thing so I think it might be my car... As long as I can get the tips even I will be happy. I love the sound so I am happy.

No need to worry, stuff like this happens, it cannot be perfect for everyone! I highly recommend this exhaust and the wait is worth it.

EDIT: added 3 small washers to each bolt on the right side which was sitting higher. Now it's even.

WShade · 10-13-2010, 02:24 PM

Quote:

Originally Posted by xdeslitx

When i spoke to him he told me that his account expired and he is trying to get back on the forums

Currently Active Users Viewing This Thread: 4 (3 members and 1 guests)
WShade, F.I. Inc, ScGRaceR

He's back.............

10-12-2010, 11:58 PM	#5063 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Got mine today! Installed it tonight and it's perfect. 18" Resonators with ERZ HFC's and it sounds awesome! Matter of fact, I could have even gone with the 12"! But then again I went from having the Meisterschaft to the FI.... Only issue so far is the tips are not aligned even. Left side is lower than right. What are you all doing to fix this issue??? EDIT: added 3 small washers to each bolt on the right side which was sitting higher. Now it's even. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV Last edited by tjlazer; 10-15-2010 at 05:19 PM. Reason: got it fixed.

10-13-2010, 06:18 AM	#5065 (permalink)
ProfessorDave A True Z Fanatic Join Date: Jul 2010 Location: Scranton, PA Posts: 1,580 Drives: In the fairway Rep Power: 18	You must really like a LOUD exhaust! Shim the muffler hanger (all three bolt, where the hanger attaches to the undercarriage) with washers on the high side. I can't complain about tip alignment - mine were perfect, no shimming. And from what I've read tip misalignment is far more common on other brands. __________________ Rain, snow, sleet, hail: 2009 Mazda 3 sGT HB Everything else: 2009 370z, PW Touring 6MT

10-13-2010, 11:59 AM	#5069 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 52 Posts: 2,496 Drives: Z34, R35 Rep Power: 19	Well I think the hanger needs to be adjusted. I wonder how easy I can bend it? I also noticed one tip sticks out further than the other. But my other exhaust did the same thing so I think it might be my car... As long as I can get the tips even I will be happy. I love the sound so I am happy. No need to worry, stuff like this happens, it cannot be perfect for everyone! I highly recommend this exhaust and the wait is worth it. EDIT: added 3 small washers to each bolt on the right side which was sitting higher. Now it's even. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV Last edited by tjlazer; 10-15-2010 at 05:18 PM. Reason: got it fixed yo!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	Venomous01	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	01-25-2013 09:27 AM
the Fast and the....	arcticreaver	The Lounge (Off Topic)	1	05-04-2009 04:48 PM
Fast girls, Fast cars, One wild ride- Sports Illustrated Swimsuit 2009	zero	Nissan 370Z Photos / Spyshots / Video / Media Gallery	33	02-26-2009 09:14 PM
Fast Intentions needs prototype!!!	F.I. Inc.	Intake/Exhaust	28	02-16-2009 06:35 AM

10-11-2010, 01:42 PM	#5057 (permalink)
xdeslitx A True Z Fanatic Join Date: Jul 2010 Location: Tu-jungle, CA Posts: 13,045 Drives: Yaris Rep Power: 62	Installing on Friday. Whoo-hoo!

10-13-2010, 07:51 AM	#5066 (permalink)
Brazilian Z Base Member Join Date: Aug 2009 Location: Brazil Posts: 25 Drives: 09 Nissan 370Z Bl m6 Rep Power: 15	Tony, where are you? I'm really afraid now...