STILLEN G3 Ultra Long Tube Intake

Josh@STILLEN · 02-27-2009, 10:59 AM

Very nicely! They are finalizing the jigs and such for production. Should be about 2-3 weeks until shipping..

love67 · 03-04-2009, 04:33 PM

if the filter put right behide the gill...what if it's raining? or washing the car? isn't the filter will get wet?

RCZ · 03-04-2009, 05:09 PM

Absolutely nothing will happen if the filter gets a little wet.

semtex · 03-04-2009, 05:30 PM

It also comes with a shield that protects the front so that it doesn't get doused when it's raining.

love67 · 03-04-2009, 06:25 PM

i see, thanks guys, because im worried(if one day i get this car) when i take my car to car wash, and i see they shoot some much water in it..i wonder if the water will get all over the filter..

semtex · 03-04-2009, 07:17 PM

Here's a pic from Stillen showing their intake on a G37. You can sorta see where the shield is (but it's a little hard to see because they've got some special transparency effect going on).

Here's another pic of the setup:

wstar · 03-05-2009, 01:57 AM

My primary practical concern about these is: how hard is it going to be to service the K&N filters? If the answer is remove the bumper again for filter service, I'd have to pass on that.

semtex · 03-05-2009, 07:58 AM

^ Yeah, I've been wondering about that as well. But you don't actually have to remove the front fascia to install this, I've read. You just have to go up from under the car, which means you'd have to remove all the underpanels.

LiquidZ · 03-05-2009, 11:40 AM

Quote:

Originally Posted by RelentlessRY

I can Vouch for Josh here. I work at Harbor Nissan in our performance dept. And I also own a 370z myself. I have a set of Headers from Stillen I am going to install and I am looking foward to these intakes. Josh When these come out Let me know, I just could not swing the exhaust at this time. I know Brad has been talking to Kyle and we are very excited about this new intake.

So Nissan will not warranty a Part from Stillen, But Stillen will. And dealing with Stillen first hand as a customer and a Vendor I give them 2 thumbs up!!!

And if your dealer is giving you issues about your Mods bring your car to me, I take care of 90% of the Z's that come in the door being a past 350z owner and a 370z owner now.

Relentless Ryan

Stillen has headers out that will fit the 370Z?

love67 · 03-06-2009, 01:58 AM

Quote:

Originally Posted by semtex

^ Yeah, I've been wondering about that as well. But you don't actually have to remove the front fascia to install this, I've read. You just have to go up from under the car, which means you'd have to remove all the underpanels.

that's still going to be pain in the *** to do...is it very different than the G2 in performance and the sound? because i only cares about the intake sounds...

ssqpolo · 03-06-2009, 03:29 AM

sooo..has anyone got one yet>

tvfreakazoid · 03-08-2009, 08:04 PM

Well I have to admit it sounds nice. Raspy and loud. Hopefully the Z would be louder and deeper if possible.

semtex · 03-08-2009, 08:06 PM

Quote:

Originally Posted by ssqpolo

sooo..has anyone got one yet>

It's not released yet.

kustomZ · 03-08-2009, 08:15 PM

Looking at the G37, it would be sweet if those filters extended down to the fog light holes. I would open the bumper there to get even colder air from that point, and not have the filters directly in front of the radiator. It would also make servicing the filters a LOT easier.

I know most people wouldn't want to sacrifice their fog light mounts for the sake of an intake system, but I sure would!

semtex · 03-08-2009, 08:22 PM

Quote:

Originally Posted by kustomZ

Looking at the G37, it would be sweet if those filters extended down to the fog light holes. I would open the bumper there to get even colder air from that point, and not have the filters directly in front of the radiator. It would also make servicing the filters a LOT easier.

I know most people wouldn't want to sacrifice their fog light mounts for the sake of an intake system, but I sure would!

I'm not sure I'd want them that low. It'd significantly increase the risk of hydro-lock if you have to drive through deep water in a heavy rainstorm or something. Considering how low these cars are to the ground already, I'd be really nervous if my intakes were that low to the ground. Just my

03-04-2009, 05:30 PM	#94 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	It also comes with a shield that protects the front so that it doesn't get doused when it's raining. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

03-04-2009, 07:17 PM	#96 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	Here's a pic from Stillen showing their intake on a G37. You can sorta see where the shield is (but it's a little hard to see because they've got some special transparency effect going on). Here's another pic of the setup: __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

03-05-2009, 07:58 AM	#98 (permalink)
semtex A True Z Fanatic Join Date: Jan 2009 Location: Behind enemy lines Age: 53 Posts: 5,995 Drives: People to drink Rep Power: 32	^ Yeah, I've been wondering about that as well. But you don't actually have to remove the front fascia to install this, I've read. You just have to go up from under the car, which means you'd have to remove all the underpanels. __________________ "There are no small accidents on this circuit." -- Ayrton Senna 316.8whp & 248 ft/lbs (Dyno Dynamics) \| 319whp & 256 ft/lbs (DynoJet) (04/23/10) Stillen G3 CAI, CBE, Pulley / F.I. LTH / GTSpec Ladder Brace / Setrab Oil Cooler / UpRev-tuned by Forged Perf.

03-08-2009, 08:04 PM	#102 (permalink)
tvfreakazoid A True Z Fanatic Join Date: Jan 2009 Location: kommie kali Posts: 1,238 Drives: 2015 Audi S5; 6spd. Rep Power: 10324	Well I have to admit it sounds nice. Raspy and loud. Hopefully the Z would be louder and deeper if possible. __________________ Mudders milk

03-08-2009, 08:15 PM	#104 (permalink)
kustomZ Base Member Join Date: Mar 2009 Location: Texas Posts: 112 Drives: TBD Rep Power: 256	Looking at the G37, it would be sweet if those filters extended down to the fog light holes. I would open the bumper there to get even colder air from that point, and not have the filters directly in front of the radiator. It would also make servicing the filters a LOT easier. I know most people wouldn't want to sacrifice their fog light mounts for the sake of an intake system, but I sure would! __________________

02-27-2009, 10:59 AM	#91 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 533	Very nicely! They are finalizing the jigs and such for production. Should be about 2-3 weeks until shipping..

03-04-2009, 04:33 PM	#92 (permalink)
love67 Base Member Join Date: Feb 2009 Location: Walnut, CA91789 Posts: 42 Drives: not yet Rep Power: 186	if the filter put right behide the gill...what if it's raining? or washing the car? isn't the filter will get wet?

03-04-2009, 05:09 PM	#93 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	Absolutely nothing will happen if the filter gets a little wet.

03-04-2009, 06:25 PM	#95 (permalink)
love67 Base Member Join Date: Feb 2009 Location: Walnut, CA91789 Posts: 42 Drives: not yet Rep Power: 186	i see, thanks guys, because im worried(if one day i get this car) when i take my car to car wash, and i see they shoot some much water in it..i wonder if the water will get all over the filter..

03-05-2009, 01:57 AM	#97 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	My primary practical concern about these is: how hard is it going to be to service the K&N filters? If the answer is remove the bumper again for filter service, I'd have to pass on that.

03-06-2009, 03:29 AM	#101 (permalink)
ssqpolo Track Member Join Date: Jan 2009 Location: Florida Posts: 882 Drives: '12 Black Nismo Rep Power: 267	sooo..has anyone got one yet>

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Intake for VQ37VHR	vdcoff	Intake/Exhaust	7	01-25-2009 03:27 PM
Jim Wolf Technology Intake for $395	AK370Z	Intake/Exhaust	17	12-10-2008 06:28 PM
Edmunds: COMING SOON...370Z long termer..	cstr_Cali	Nissan 370Z General Discussions	1	12-01-2008 10:43 AM
Will intake for G37 fit the 370z?	G in ny	Intake/Exhaust	5	11-28-2008 04:28 AM
Nissan 370Z on Display @ Stillen on 11/18	Slidefox	Nissan 370Z General Discussions	4	11-13-2008 07:41 PM