Fast Intentions exhaust is here! (continued)

jhalloran004 · 03-14-2014, 01:13 PM

FI just charged me the remainder of my balance due. I guess that's a good sign that were getting close!!!!

HngNgn19 · 03-14-2014, 02:31 PM

Quote:

Originally Posted by jhalloran004

FI just charged me the remainder of my balance due. I guess that's a good sign that were getting close!!!!

Congrats, what was your PO#?

jhalloran004 · 03-14-2014, 02:53 PM

Quote:

Originally Posted by HngNgn19

Congrats, what was your PO#?

#912. I'll be sure to keep everyone posted when I get a shipping notice!

mrthomr · 03-14-2014, 01:27 PM

Sounds like some are shipping today. Grats

genesis2012 · 03-15-2014, 01:24 AM

damn... only had the exhaust for 2 weeks but I might have to get rid of it. Moved to a new neighborhood with 4 speedbumps and my car is lowered so I have to angle it like crazy...

LSP1995 · 03-15-2014, 02:47 AM

Quote:

Originally Posted by genesis2012

damn... only had the exhaust for 2 weeks but I might have to get rid of it. Moved to a new neighborhood with 4 speedbumps and my car is lowered so I have to angle it like crazy...

I think I'd raise it back to stock height before going back to the stock exhaust!

bkjunk · 03-15-2014, 09:03 AM

Quote:

Originally Posted by genesis2012

damn... only had the exhaust for 2 weeks but I might have to get rid of it. Moved to a new neighborhood with 4 speedbumps and my car is lowered so I have to angle it like crazy...

I think it's time to move, or maybe get a little apartment on the down low for your baby to stay at.

Also, doesn't FI say their exhaust hangs no lower than the stock exhaust. So the issue may still exist if you go back to stock.

genesis2012 · 03-15-2014, 02:50 AM

Lol thought about that.

But the stock height hurts my eyes.

LSP1995 · 03-15-2014, 02:57 AM

Quote:

Originally Posted by genesis2012

Lol thought about that.

But the stock height hurts my eyes.

I assume you have nice roads in Orange County. Here in Louisiana, it's like driving on goat paths. I'm leaving the suspension alone. Don't really care to deal with damaging my Z because of potholes, uneven surfaces, or crap falling off of vehicles. At the stock height, a recap torn away from an 18-wheeler tire would be a nightmare for the front end.

genesis2012 · 03-15-2014, 03:01 AM

^^

OC roads are immaculate

LSP1995 · 03-15-2014, 03:05 AM

Quote:

Originally Posted by genesis2012

^^

OC roads are immaculate

I'm jealous!

genesis2012 · 03-15-2014, 01:24 PM

^^

Yes I will probably scrape with my stock

HngNgn19 · 03-15-2014, 01:28 PM

Genesis, Noooooooooo! don't do it! I'm not sure how fast you need to leave your neighborhood, but I'm sure you can take an extra minute or minute and a half to angle and clear all those four speed bumps! Don't do it man, you will regret it!

genesis2012 · 03-15-2014, 01:40 PM

Quote:

Originally Posted by HngNgn19

Genesis, Noooooooooo! don't do it! I'm not sure how fast you need to leave your neighborhood, but I'm sure you can take an extra minute or minute and a half to angle and clear all those four speed bumps! Don't do it man, you will regret it!

Dude I just took a ride down the street and I'm hurting inside. Feels like pure orgasm

cooltoy · 03-15-2014, 01:37 PM

See if a shop can weld on little angle plates to protect the edge.

03-15-2014, 01:24 AM	#5 (permalink)
genesis2012 Enthusiast Member Join Date: Mar 2013 Location: Orange County Posts: 275 Drives: BS Sport Rep Power: 14	damn... only had the exhaust for 2 weeks but I might have to get rid of it. Moved to a new neighborhood with 4 speedbumps and my car is lowered so I have to angle it like crazy... __________________ FI Non-Resonated \| Eibach Springs \| 20MM Spacers \| Blacked-Out Wing, Emblems & Diffuser \| Powder Coated Dark Gloss Grey Wheels \| GT-R Push Start

03-15-2014, 02:50 AM	#8 (permalink)
genesis2012 Enthusiast Member Join Date: Mar 2013 Location: Orange County Posts: 275 Drives: BS Sport Rep Power: 14	Lol thought about that. But the stock height hurts my eyes. __________________ FI Non-Resonated \| Eibach Springs \| 20MM Spacers \| Blacked-Out Wing, Emblems & Diffuser \| Powder Coated Dark Gloss Grey Wheels \| GT-R Push Start

03-15-2014, 03:01 AM	#10 (permalink)
genesis2012 Enthusiast Member Join Date: Mar 2013 Location: Orange County Posts: 275 Drives: BS Sport Rep Power: 14	^^ OC roads are immaculate __________________ FI Non-Resonated \| Eibach Springs \| 20MM Spacers \| Blacked-Out Wing, Emblems & Diffuser \| Powder Coated Dark Gloss Grey Wheels \| GT-R Push Start

03-15-2014, 01:24 PM	#12 (permalink)
genesis2012 Enthusiast Member Join Date: Mar 2013 Location: Orange County Posts: 275 Drives: BS Sport Rep Power: 14	^^ Yes I will probably scrape with my stock __________________ FI Non-Resonated \| Eibach Springs \| 20MM Spacers \| Blacked-Out Wing, Emblems & Diffuser \| Powder Coated Dark Gloss Grey Wheels \| GT-R Push Start

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions exhaust is here!	F.I. Inc.	Intake/Exhaust	8307	06-09-2012 02:32 PM
Fast Intentions exhaust just ordered	Jmigs81	Intake/Exhaust	32	02-12-2012 03:39 PM
Fast Intentions Exhaust	Mark Gomez	Intake/Exhaust	13	05-19-2011 07:51 PM
ARK Exhaust vs. Fast Intentions	dnasty370z	Intake/Exhaust	61	09-06-2010 06:25 PM

03-14-2014, 01:13 PM	#1 (permalink)
jhalloran004 Base Member Join Date: Feb 2014 Location: Rochester, NY Posts: 24 Drives: 09 Nissan 370Z 6MT Rep Power: 13	FI just charged me the remainder of my balance due. I guess that's a good sign that were getting close!!!!

03-14-2014, 01:27 PM	#4 (permalink)
mrthomr Base Member Join Date: Sep 2012 Location: Morgantown, WV Posts: 217 Drives: 2010 Z Roadster Rep Power: 31	Sounds like some are shipping today. Grats

03-15-2014, 01:28 PM	#13 (permalink)
HngNgn19 Base Member Join Date: Jan 2014 Location: San Jose, CA Posts: 157 Drives: 14 370Z Dark Black Rep Power: 13	Genesis, Noooooooooo! don't do it! I'm not sure how fast you need to leave your neighborhood, but I'm sure you can take an extra minute or minute and a half to angle and clear all those four speed bumps! Don't do it man, you will regret it!

03-15-2014, 01:37 PM	#15 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 14,009 Drives: 14 PW 370Z S/T MT Rep Power: 243724	See if a shop can weld on little angle plates to protect the edge.