Who has Meisterschaft Exhaust? If yes, Answer my questions please!!!

MaDMaXX · 02-10-2013, 11:34 AM

If you've only change this part of the exhaust, the sound won't change too much, that's the advantage of ART pipes. It makes the note deeper and marginally louder, but not too much, you do get the power increase though

Do not think that the gasses that have passed through a cat Vs those that have not, are that different to your health, they're all pretty bad.

MXSG · 02-20-2013, 05:48 PM

I just put on an axle back version and it sounds great, not too loud but a lot more grunt than stock. Unfortunately, there are some fitment problems with the tips. I took it to a local shop to confirm that everything is lined up and installed correctly and they agreed that the passenger side tip is just too long. I contacted Meisterschaft earlier today but haven't heard back. Since it's just clamped on I'm assuming they'll swap out the pipe/tip for one that is the proper length and all will be well.

Here's a couple pics. Notice the passenger side sticks out about a solid inch past the bumper and the driver side is flush.

Doug@PTUNING · 02-25-2013, 07:41 AM

Here two video of Meisterschaft axle-back that I bought first last year then bought mid-section from AAM. I believe Meisterschaft mid-section is 3" pipe which I could not afford a full mid-section along with axle-back. I opt to get 2.5" AAM mid-section. Enjoy the video.

Meisterschaft Axle-back (3.0" pipe) 2x102mm (Round Split Tips)
Factory Mid-Section/Y-Pipe (2.25" Pipe)
Factory HFC (High Flow Catted)

http://m.youtube.com/watch?v=kdBxK62f_xw&feature=plcp

Meisterschaft Axle-back (3.0" pipe) 2x102mm (Round Split Tips)
AAM S-Line Mid-Section/Y-Pipe (2.5" Pipe)
Factory HFC (High Flow Catted)

http://m.youtube.com/watch?v=8aXo82mgR70&feature=relmfu

Ire · 04-28-2013, 05:20 PM

Quote:

Originally Posted by MXSG

I just put on an axle back version and it sounds great, not too loud but a lot more grunt than stock. Unfortunately, there are some fitment problems with the tips. I took it to a local shop to confirm that everything is lined up and installed correctly and they agreed that the passenger side tip is just too long. I contacted Meisterschaft earlier today but haven't heard back. Since it's just clamped on I'm assuming they'll swap out the pipe/tip for one that is the proper length and all will be well.

Here's a couple pics. Notice the passenger side sticks out about a solid inch past the bumper and the driver side is flush.

i have the same problem, my passenger side is slightly (1cm or so) longer than the other side. what did you end up doing to fix it?

MXSG · 02-26-2013, 10:56 PM

Here's mine. The sound quality on the video turned out pretty good.

02-10-2013, 11:34 AM	#1 (permalink)
MaDMaXX Enthusiast Member Join Date: Jan 2012 Location: Oregon from England Posts: 292 Drives: 350z Rep Power: 14	If you've only change this part of the exhaust, the sound won't change too much, that's the advantage of ART pipes. It makes the note deeper and marginally louder, but not too much, you do get the power increase though Do not think that the gasses that have passed through a cat Vs those that have not, are that different to your health, they're all pretty bad. __________________ '04.5 350Z - Very Motordyne.

02-25-2013, 07:41 AM	#3 (permalink)
Doug@PTUNING Base Member Join Date: Mar 2012 Location: Manassas, VA Posts: 242 Drives: 1996 Honda Civic Rep Power: 14	Here two video of Meisterschaft axle-back that I bought first last year then bought mid-section from AAM. I believe Meisterschaft mid-section is 3" pipe which I could not afford a full mid-section along with axle-back. I opt to get 2.5" AAM mid-section. Enjoy the video. Meisterschaft Axle-back (3.0" pipe) 2x102mm (Round Split Tips) Factory Mid-Section/Y-Pipe (2.25" Pipe) Factory HFC (High Flow Catted) http://m.youtube.com/watch?v=kdBxK62f_xw&feature=plcp Meisterschaft Axle-back (3.0" pipe) 2x102mm (Round Split Tips) AAM S-Line Mid-Section/Y-Pipe (2.5" Pipe) Factory HFC (High Flow Catted) http://m.youtube.com/watch?v=8aXo82mgR70&feature=relmfu Last edited by Doug@PTUNING; 02-26-2013 at 02:41 AM.

02-26-2013, 10:56 PM	#5 (permalink)
MXSG Base Member Join Date: Mar 2012 Location: Lakeland, FL Posts: 20 Drives: '12 Base+Sport 6MT Rep Power: 14	Here's mine. The sound quality on the video turned out pretty good. Doug@PTUNING likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GT Haus Meisterschaft Exhaust	czheng51	Intake/Exhaust	2	06-06-2011 02:34 AM
370Z price and other general questions IF U CAN ANSWER!	krnbbagadog	Nissan 370Z Pricing / Ordering Discussions	15	03-27-2011 01:47 AM
FS/T: Meisterschaft exhaust	JerWA	Parts for sale (Private Classifieds)	47	02-18-2011 05:03 PM
Meisterschaft exhaust	pauliewalnutz	Intake/Exhaust	32	02-16-2011 07:51 PM
Meisterschaft Exhaust	rockhounds	Intake/Exhaust	5	07-01-2010 04:59 PM

02-20-2013, 05:48 PM	#2 (permalink)
MXSG Base Member Join Date: Mar 2012 Location: Lakeland, FL Posts: 20 Drives: '12 Base+Sport 6MT Rep Power: 14	I just put on an axle back version and it sounds great, not too loud but a lot more grunt than stock. Unfortunately, there are some fitment problems with the tips. I took it to a local shop to confirm that everything is lined up and installed correctly and they agreed that the passenger side tip is just too long. I contacted Meisterschaft earlier today but haven't heard back. Since it's just clamped on I'm assuming they'll swap out the pipe/tip for one that is the proper length and all will be well. Here's a couple pics. Notice the passenger side sticks out about a solid inch past the bumper and the driver side is flush.