New Style Takeda Attack Intakes $400 - Got mine!

RUFFSTUFF · 06-03-2013, 07:59 AM

Quote:

Originally Posted by Sh0velMan

What? Nothing unbolts...

Anyway he was talking about cutting it to be more circular in order to have smoother flow through the elbow. He wasn't saying it was necessary for the intakes to function.

The section of the radiator support he is speaking of is definitely NOT round and would have to be cut if you wanted it to accommodate a round silicone bend without deforming it from round.

The section in question certainly is not round and certainly unbolts and comes right out. After which, the silicone elbow has plenty of room and is not compressed at all. That is how I installed mine and others as well.

Doubt me still? Look at Photo #4 above... Guess what those bolts attach to...

Maybe I have a special high performance, ease of upgrade model whereas you don't.

Sh0velMan · 06-03-2013, 08:16 AM

Quote:

Originally Posted by RUFFSTUFF

The section in question certainly is not round and certainly unbolts and comes right out. After which, the silicone elbow has plenty of room and is not compressed at all. That is how I installed mine and others as well.

Doubt me still? Look at Photo #4 above... Guess what those bolts attach to...

Maybe I have a special high performance, ease of upgrade model whereas you don't.

Wow.

So you're full of ****.

Here's a nice, open photo of the piece in question. The bolt holes hold the support to the frame of the car. The section in question is very firmly cast into the rest of the support and cannot be 'Unbolted and removed'.

RUFFSTUFF · 06-03-2013, 08:31 AM

Quote:

Originally Posted by Sh0velMan

The bolt holes hold the support to the frame of the car.

And amazingly enough, that is how you remove the rad support, opening up that space. Thank you for proving me right. You can try to argue this point as long as you wish. I have already done this over a year ago, and have posted doing so several times. Others as well. I too was not impressed with squeezing the tubes through the supports and this was my solution.
Now if your argument is based on the idea that the rad support is 2 pieces, no dice. It's just one piece and it all comes out.

Now,

Sh0velMan · 06-03-2013, 08:43 AM

Quote:

Originally Posted by RUFFSTUFF

And amazingly enough, that is how you remove the rad support, opening up that space. Thank you for proving me right. You can try to argue this point as long as you wish. I have already done this over a year ago, and have posted doing so several times. Others as well. I too was not impressed with squeezing the tubes through the supports and this was my solution.

Now,

It's all one big piece, what the hell are you talking about?

The radiator support is one huge piece of plastic that stretches from one side of the front of the car to the other. There are some bolt-on parts on the far left and right sides that mount to the fenders and support the headlights. NOTHING on the interior of it is removable!

Please supply pictures of the part that you "Unbolted and removed"

I would LOVE to see how different your radiator support is than mine.

You are the first and only person on this forum that I have seen mention removing these pieces.

Here are some more actual photos of the radiator support.

If you are trying to say that in order to make this intake fit, you (and others) have completely removed the 'rad support', then it couldn't be more plain you're making stuff up to be an internet tough guy.

madwi · 06-03-2013, 08:54 AM

Quote:

Originally Posted by Sh0velMan

Wow.

So you're full of ****.

Here's a nice, open photo of the piece in question. The bolt holes hold the support to the frame of the car. The section in question is very firmly cast into the rest of the support and cannot be 'Unbolted and removed'.

Correct, below is a pic of the part that unbolts from the pic Shovelman posted. The hose that comes with the kit does have to be deformed a bit to fit through AFTER this part is removed, you WOULD have to grind/cut the area shown in Shovelman's photo if you wanted to have every pipe be as round as possible from the filter to the throttle bodies.

Sh0velMan · 06-03-2013, 09:00 AM

Quote:

Originally Posted by madwi

Correct, below is a pic of the part that unbolts from the pic Shovelman posted. The hose that comes with the kit does have to be deformed a bit to fit through AFTER this part is removed, you WOULD have to grind/cut the area shown in Shovelman's photo if you wanted to have every pipe be as round as possible from the filter to the throttle bodies.

Yes.

If he is talking about the snorkel from the airbox to that hole, then yes, he is correct and this has been a massive mis-communication.

Either way, that hole through the radiator support is the same permanently attached structure on everyone's car.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Blowing out Takeda intakes!!! Only @ IIR*********************************************	ImportImage	Exhaust/Intake	174	07-16-2014 02:51 PM
Takeda Short Ram intakes	toxik	North East Region	0	05-13-2011 11:28 PM
FS: Takeda Intakes	JB1	Parts for sale (Private Classifieds)	24	03-31-2010 10:56 AM
Takeda intakes and Scangauge info	JB1	Intake/Exhaust	11	01-26-2010 11:48 PM