Z1 Post MAF Tubes

Pelican170 · 07-17-2015, 01:53 PM

Quote:

Originally Posted by JC-Nismo

A waste of $108 it seems..........

I was gonna buy these tomorrow cause I'm not far from Z1, but after reading this, I'll keep my money.
How does it breathe better, but gains nothing??? Will it make the K&N Filters perform better?
Other than that, what's the point? Is there a cool factor of having these under the hood where Some would waste $108 for pretty much ............NOTHING!!!

A long time ago someone posted the gains from these. They were just short of the long tube intakes people put on, but keep more mid range power. I believe the dyno showed a 6 - 8 hp gain. Again, this was years ago so im not sure where to even look for the info. It was on these forums though...

JC-Nismo · 07-17-2015, 07:16 PM

Quote:

Originally Posted by Pelican170

A long time ago someone posted the gains from these. They were just short of the long tube intakes people put on, but keep more mid range power. I believe the dyno showed a 6 - 8 hp gain. Again, this was years ago so im not sure where to even look for the info. It was on these forums though...

Ok cool, thanks for the info.

GZ3 · 07-17-2015, 01:55 PM

twasssss me......they did gain around 5.6 rwhp hp

SwissCheese · 07-17-2015, 07:12 PM

Quote:

Originally Posted by GZ3

twasssss me......they did gain around 5.6 rwhp hp

Was that with a tune?

GZ3 · 07-17-2015, 07:33 PM

Quote:

Originally Posted by SwissCheese

Was that with a tune?

No tune. I had the hps post mafs. Pretty sure z1 is the same. This time im going with mishimoto

SwissCheese · 07-17-2015, 07:34 PM

Quote:

Originally Posted by GZ3

No tune. I had the hps post mafs. Pretty sure z1 is the same. This time im going with mishimoto

Are there any differences between any of them?

GZ3 · 07-17-2015, 07:38 PM

I really dont think so... All i remeber is z1's could have been a bit longer on the passenger side. The hps fit spot on

synolimit · 07-31-2015, 02:48 AM

Z1 doesn't have steel wire inside to keep the shape so under WOT the tube doesn't collapse. I don't think it's a issue because it's really thick silicone. HPS I believe does have the steel wire. Only difference I know of.

GZ3 · 07-31-2015, 07:44 AM

Quote:

Originally Posted by synolimit

Z1 doesn't have steel wire inside to keep the shape so under WOT the tube doesn't collapse. I don't think it's a issue because it's really thick silicone. HPS I believe does have the steel wire. Only difference I know of.

That is correct on both, the hps is imho the way to go

Im curious about mishimoto... Hps>z1

Pelican170 · 07-31-2015, 08:14 AM

Quote:

Originally Posted by synolimit

Z1 doesn't have steel wire inside to keep the shape so under WOT the tube doesn't collapse. I don't think it's a issue because it's really thick silicone. HPS I believe does have the steel wire. Only difference I know of.

I assume you meant to say the Z1 DOES have steel wire inside. Their description on their website says it does, so I would think these are the same as the HPS...

GZ3 · 07-31-2015, 09:41 AM

Quote:

Originally Posted by Pelican170

I assume you meant to say the Z1 DOES have steel wire inside. Their description on their website says it does, so I would think these are the same as the HPS...

i had to cut my z1 just to fit. I can assure you there was no metal wiring anywere in the contruct of the tube its just rubber

daisuke149 · 07-31-2015, 09:42 AM

Quote:

Originally Posted by GZ3

i had to cut my z1 just to fit. I can assure you there was no metal wiring anywere in the contruct of the tube its just rubber

It does have metal wiring actually. And they dont need to be cut to fit. They are a tight fit, but thats a good thing.

GZ3 · 07-31-2015, 09:44 AM

Quote:

Originally Posted by daisuke149

It does have metal wiring actually. And they dont need to be cut to fit. They are a tight fit, but thats a good thing.

when I sliced into it there was NONE....unless its deeper or closer to the center. either way I sold them

GZ3 · 07-31-2015, 12:23 PM

I wonder if anyone else has dynod these besides me like 4 years ago lol

Pelican170 · 07-31-2015, 12:49 PM

Quote:

Originally Posted by GZ3

I wonder if anyone else has dynod these besides me like 4 years ago lol

Yea, I actually dont think it was you that I was referring to, i think it was Jordo...

But i havent seen anything recent.

07-17-2015, 01:55 PM	#3 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 23	twasssss me......they did gain around 5.6 rwhp hp __________________ 09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD

07-17-2015, 07:38 PM	#7 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 23	I really dont think so... All i remeber is z1's could have been a bit longer on the passenger side. The hps fit spot on __________________ 09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD

07-31-2015, 02:48 AM	#8 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3391	Z1 doesn't have steel wire inside to keep the shape so under WOT the tube doesn't collapse. I don't think it's a issue because it's really thick silicone. HPS I believe does have the steel wire. Only difference I know of. __________________ 13 370z-

07-31-2015, 12:23 PM	#14 (permalink)
GZ3 A True Z Fanatic Join Date: Dec 2009 Location: SATX Posts: 3,296 Drives: Z Rep Power: 23	I wonder if anyone else has dynod these besides me like 4 years ago lol __________________ 09 GT-R 12' 370Z 7AT HANDED DOWN 12'+13' 5.0 SOLD

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My new HPS post MAF tubes installed	Azroadster	Intake/Exhaust	423	08-22-2016 09:31 PM
[FOR SALE] HPS Post MAF Silicone Tubes	pkrifa	Parts for sale (Private Classifieds)	3	12-17-2011 07:09 PM
Post Maf Tubes AND Pop Charger??	370guy	Intake/Exhaust	2	11-22-2011 06:31 PM
[FOR SALE] AFE dry drop ins, HPS post MAF tubes	Kastley85891	Parts for sale (Private Classifieds)	2	05-09-2011 08:03 PM
FS new HPS post MAF tubes	azn370z	North West Region	0	03-14-2011 09:49 PM