|
I just bolted on my Megan exhaust and one of the pipes is banging on the crossmember at certain RPM's and during shifting. The Megan exhaust is a dual system
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
05-17-2011, 01:43 PM
|
#1 (permalink) |
|
Base Member
 
Join Date: Apr 2011
Location: Knoxville, TN
Posts: 67
Drives: 2010 PG 370z
Rep Power: 14  |
Exhaust banging on crossmember
I just bolted on my Megan exhaust and one of the pipes is banging on the crossmember at certain RPM's and during shifting. The Megan exhaust is a dual system and the other pipe sits up about 1/2 to 3/4 of an inch above the crossmember with no problems.
I tried taking the entire exhaust off and bolting it on again but got the same problem. I read some threads where folks were having similar problems with Stillen and fixed it by lowering the crossmember a bit with washers. I guess the other option would be to someone raise the hangers up a bit. Any thoughts or suggestions would be appreciated. HB
__________________
HoneyBadger don't care. |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Finally Got my exhaust! HKS Hi-Power Ti Exhaust (many Pics, Video inside AK370Z) | AK370Z | Intake/Exhaust | 102 | 05-11-2013 01:32 PM |
| STILLEN Exhaust - Now Easy Clearance of Crossmember | Josh@STILLEN | STILLEN | 16 | 04-06-2012 10:32 PM |
| AAM Comp. Exhaust Sale: 2.5" and 3'' True Dual Exhaust Exhaust, HFC and Test Pipes! | Rob@Altered | Exhaust/Intake | 33 | 04-02-2012 07:03 PM |
| How close should Stillen CBE be to crossmember? | Lee123 | STILLEN | 12 | 07-01-2010 01:51 PM |
| Any harm to putting washers under the crossmember? | Lee123 | Intake/Exhaust | 8 | 06-25-2010 05:35 PM |
Threaded Mode
