Berk HFC's + Stillen CBE = RAAAAAAASSSSPPPPP

destinyZ · 10-31-2010, 09:18 AM

This is weird because a friend of mine has the same setup and its sound is solid. Replace all your gaskets. If you used the gaskets that came with it, replace them with gaskets from autozone or napa then use "exhuast joint and crack sealant. This should work. make sure that you when you put the gasket in that you use the sealant with it...put sealan on the inside of flange, put gasket on, put sealant on the other pipe connecting to the flange and bolt. another thing is i would highly recommend using grade "A" nuts and bolts on exhaust or any system that will get hot and use antisieze on the nuts and bolts. While your under there, make sure all the flanges are welded good. If this dosent work then its the HFC and ask to get them replaced. Good luck

destinyZ · 10-31-2010, 09:25 AM

Just listend to the video and thats not rasp, sounds like a bad seal. Before doing what I said above, try bending all the heat shields. If that dosent work then try doing what i said about, its cheap to get.

10-31-2010, 09:25 AM	#2 (permalink)
destinyZ Enthusiast Member Join Date: Apr 2010 Location: Guam, USA Age: 36 Posts: 415 Drives: FROM INDIANA Rep Power: 16	Just listend to the video and thats not rasp, sounds like a bad seal. Before doing what I said above, try bending all the heat shields. If that dosent work then try doing what i said about, its cheap to get. Last edited by destinyZ; 10-31-2010 at 09:29 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB Berk, or Stillen HFC's	Mr&Mrs	Wanted	0	08-24-2010 07:02 AM
Those with G3's/Stillen CBE/Berk HFC's	Red370	Intake/Exhaust	23	02-14-2010 03:07 PM
WTB: Berk/Stillen/FI HFC's	Red370	Parts for sale (Private Classifieds)	3	10-02-2009 05:36 PM
HFC's. Stillen or Berk???	Stockgtr	Intake/Exhaust	21	06-27-2009 03:03 PM
Berk HFC's, Stillen Intake, and a Stillen Dual Exhaust....	2theextreme	The Lounge (Off Topic)	8	06-18-2009 10:01 PM

10-31-2010, 09:18 AM	#1 (permalink)
destinyZ Enthusiast Member Join Date: Apr 2010 Location: Guam, USA Age: 36 Posts: 415 Drives: FROM INDIANA Rep Power: 16	This is weird because a friend of mine has the same setup and its sound is solid. Replace all your gaskets. If you used the gaskets that came with it, replace them with gaskets from autozone or napa then use "exhuast joint and crack sealant. This should work. make sure that you when you put the gasket in that you use the sealant with it...put sealan on the inside of flange, put gasket on, put sealant on the other pipe connecting to the flange and bolt. another thing is i would highly recommend using grade "A" nuts and bolts on exhaust or any system that will get hot and use antisieze on the nuts and bolts. While your under there, make sure all the flanges are welded good. If this dosent work then its the HFC and ask to get them replaced. Good luck