My new HPS post MAF tubes installed

TonyBPD · 02-20-2011, 02:59 PM

A mistake was made somewhere during the packaging. I just took a look at mine and they are different with different part numbers.

Azroadster · 02-20-2011, 05:11 PM

Quote:

Originally Posted by gorpie

I finally decided to install my HPS tubes today and ran into some problems. The left side tube fit just fine and all hook up great. The right side tube would hook up to the air box and the intake just fine but the alignment of the little plastic box would not line up at all. I could get it hooked up but then it puts a bad kink in the main intake hose. I tired both tubes and same problem on the right side.
Both of my HPS intake tubes are exactly alike. Is there suppose to be a right and a left? The tubes came in separate plastic bags with different part numbers on them, but they are the same. I worked on this project for two hours (most all of that was scratching my head) which should have taken 15 minute for the whole thing. Bottom line is that I didn’t like what I saw so put it all back to stock.

They sent you two left side hoses. The hoses are not identical. When installed, the HPS logo is on the top of both hoses, even though on the left side the logo is hidden under the tower brace. I would definitely call them. They screwed up and should send you the correct pieces with free shipping.

AZ

gorpie · 02-20-2011, 07:47 PM

Quote:

Originally Posted by Azroadster

They sent you two left side hoses. The hoses are not identical. When installed, the HPS logo is on the top of both hoses, even though on the left side the logo is hidden under the tower brace. I would definitely call them. They screwed up and should send you the correct pieces with free shipping.

AZ

Yes I think you are right. Both hoses have the HPS logo on both side of the hose. (two logo's a tube)

henry0844 · 02-20-2011, 08:14 PM

my tubes came with hps logo on both sides too. they need to put the logo on one side, so if the tube is on the correct side the logo will show. I put the tubes on the wrong side then switched and they fit fine. there is a difference in the angle of the crankcase vent fitting. one angle is more acute than the other. if u match them to the stock tubes u will c the difference. hope this helps.

gorpie · 02-20-2011, 09:24 PM

Quote:

Originally Posted by henry0844

my tubes came with hps logo on both sides too. they need to put the logo on one side, so if the tube is on the correct side the logo will show. I put the tubes on the wrong side then switched and they fit fine. there is a difference in the angle of the crankcase vent fitting. one angle is more acute than the other. if u match them to the stock tubes u will c the difference. hope this helps.

Yes I did match them up to the stock ones. Both HPS tubes look the same as in the pic. the stock one shows the crankcase vent fitting faceing in a down direction and the HPS is facing in a upwards direction.

henry0844 · 02-22-2011, 03:57 AM

that stinks, I'm sure u waited a while to get the tubes too. I'm sure the company u got them from will take care of u.

azn370z · 02-23-2011, 02:18 AM

I just ordered the tubes. Where is the cheapest place to buy the afe filters? And when I order the filters does it include two? Thanks

Red__Zed · 02-23-2011, 10:19 AM

ahhh...they're back-ordered everywhere...

WhiskeyHotel · 02-23-2011, 11:17 AM

Quote:

Originally Posted by azn370z

I just ordered the tubes. Where is the cheapest place to buy the afe filters? And when I order the filters does it include two? Thanks

I ordered mine from AutoAnything - I think about $100 for two. They come boxed in pairs if you look under 370Z specific air filters.

Mr. Q · 02-23-2011, 11:50 AM

Quote:

Originally Posted by azn370z

I just ordered the tubes. Where is the cheapest place to buy the afe filters? And when I order the filters does it include two? Thanks

yes they come with two

cujo · 02-23-2011, 05:09 PM

Quote:

Originally Posted by Mr. Q

yes they come with two

Does the filter available from Kraigen or AutoZone? I know they carried the K&N filters but not sure if they have it for 370Z

Mr. Q · 02-23-2011, 10:49 PM

If the AFE part# is 31-10173 then you get two in a package.

darrinps · 02-26-2011, 12:42 AM

Quote:

Originally Posted by Mr. Q

If the AFE part# is 31-10173 then you get two in a package.

I do not think you are correct. Am pretty sure that is the single filter.

The dual filter package is 31-10196

cujo · 02-26-2011, 01:46 PM

Thank you Mr. Q and darrinps for this info.
I just called my local Autozone and they don't have this in stock. I checked Autoanything.com. Their part number is:33-2399/33-2399 for about $112. I will go with them since it's free shipping

Mr. Q · 02-27-2011, 12:40 AM

Quote:

Originally Posted by darrinps

I do not think you are correct. Am pretty sure that is the single filter.

The dual filter package is 31-10196

You are correct. sorry for the mis info and I've got the damned dual filter package box still.(no excuse)

02-23-2011, 02:18 AM	#97 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 489	I just ordered the tubes. Where is the cheapest place to buy the afe filters? And when I order the filters does it include two? Thanks __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

02-26-2011, 01:46 PM	#104 (permalink)
cujo Base Member Join Date: Nov 2010 Location: California Posts: 99 Drives: 2010 370z Roadster Rep Power: 14	Thank you Mr. Q and darrinps for this info. I just called my local Autozone and they don't have this in stock. I checked Autoanything.com. Their part number is:33-2399/33-2399 for about $112. I will go with them since it's free shipping __________________ Brilliant Silver/Roadster/Touring/6MT/Fast Intentions.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
COBB Tuning Post MAF Tubes	hfrog355	Exhaust/Intake	1	03-03-2011 04:37 PM
FS: Cobb Post-MAF intake tubes (Black)	ArtVandaleigh	Parts for sale (Private Classifieds)	4	10-04-2010 10:14 PM
WTB: COBB post-Maf tubes - Black	kielbasa16	Parts for sale (Private Classifieds)	10	07-29-2010 09:05 AM
FS: Cobb Black Silicone Post-MAF Tubes	'10Anamoly	Parts for sale (Private Classifieds)	21	07-16-2010 07:39 AM

02-20-2011, 02:59 PM	#91 (permalink)
TonyBPD Track Member Join Date: May 2009 Location: South Jersey Posts: 614 Drives: 2012 VW Golf R Rep Power: 17	A mistake was made somewhere during the packaging. I just took a look at mine and they are different with different part numbers.

02-20-2011, 08:14 PM	#94 (permalink)
henry0844 Base Member Join Date: Oct 2010 Location: ventura Posts: 167 Drives: 10 370 base sprt pkg Rep Power: 14	my tubes came with hps logo on both sides too. they need to put the logo on one side, so if the tube is on the correct side the logo will show. I put the tubes on the wrong side then switched and they fit fine. there is a difference in the angle of the crankcase vent fitting. one angle is more acute than the other. if u match them to the stock tubes u will c the difference. hope this helps.

02-22-2011, 03:57 AM	#96 (permalink)
henry0844 Base Member Join Date: Oct 2010 Location: ventura Posts: 167 Drives: 10 370 base sprt pkg Rep Power: 14	that stinks, I'm sure u waited a while to get the tubes too. I'm sure the company u got them from will take care of u.

02-23-2011, 10:19 AM	#98 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	ahhh...they're back-ordered everywhere...

02-23-2011, 10:49 PM	#102 (permalink)
Mr. Q Enthusiast Member Join Date: Dec 2009 Location: Texas Posts: 349 Drives: 09 MB 370z Rep Power: 15	If the AFE part# is 31-10173 then you get two in a package.