My new HPS post MAF tubes installed

EVOnomore · 06-03-2011, 06:42 AM

Had HKS Filters on my EvoX,and they performed better than any other filter according to the Dyno.

Tunerz_Store · 06-03-2011, 11:22 AM

Should be about a week left.

Pre orders are available.

Tunerz_Store · 06-03-2011, 07:46 PM

Can you email me complete address.

michael@tunerzstore.com

JTTZR · 06-04-2011, 02:01 AM

Done. Thanks, mate.

EVOnomore · 06-04-2011, 06:38 AM

Corsport shipped mine very next day!

JTTZR · 06-05-2011, 06:04 PM

Quote:

Originally Posted by EVOnomore

Corsport shipped mine very next day!

Lucky man!

KORRUPT · 06-10-2011, 08:20 PM

I got mine form wesellcarparts too. They respond to emails quickly and shipping was fast also. Highly recommend them.

WeSellCarPart · 06-12-2011, 08:17 PM

Thanks for posting. If you need anything else, let me know.

Also, HPS is back order - should be under 2 weeks out though.

nynhex · 06-12-2011, 08:27 PM

I'm having such a hard time installing mine. Both tubes when lined up off the throttle body don't line up with the intake boxes or the breather hoses. I see ways I can cut them but seriously it's whacked.

Can anyone offer some DETAILED pictures on how to make this happen?

svmtbman · 06-12-2011, 09:40 PM

Quote:

Originally Posted by nynhex

I'm having such a hard time installing mine. Both tubes when lined up off the throttle body don't line up with the intake boxes or the breather hoses. I see ways I can cut them but seriously it's whacked.

Can anyone offer some DETAILED pictures on how to make this happen?

You may have them backwards, have you tried switching sides?

One_Quick_Z · 06-12-2011, 09:21 PM

Hmm I didnt have to make any big mods to the tubes to get them to fit....... Post pictures of you problem......

DAN

nynhex · 06-12-2011, 09:40 PM

Quote:

Originally Posted by One_Quick_Z

Hmm I didnt have to make any big mods to the tubes to get them to fit....... Post pictures of you problem......

DAN

I would but the tubes are back in their box and my car is on the road. Any chance you can post a picture of the fitment? Maybe I'm doing something wrong.

JTTZR · 06-14-2011, 01:50 AM

Hey guys, I need some help.

Having some real trouble getting the two small tension clamps loose. Any recommendations? No chance with pliers as they are impossible to reach...

I'm no mechanic and I hope there is a stupidly simple answer.

It's the middle tension clamps. (Picture is borrowed from before)

Boost_lee · 06-14-2011, 02:09 AM

Are you referring to the little ones on the breather tube/plastic assembly?
Do you have the strut bar off? Which one can you not reach?

I used a long reach slanted set of needle nose piers, they worked great.

If you can only access the lower tube (black hose with black clamp in the pic) then remove that one. You can unbolt the 10mm bolt holding the plastic assembly (far right in the pic) and it will come off with the stock intake tube.

JTTZR · 06-14-2011, 04:17 AM

Thanks, I'll give it another go now. Those clamps are annoying - wish they'd gone for ones with a screw...

06-03-2011, 11:22 AM	#2 (permalink)
Tunerz_Store A True Z Fanatic Join Date: Aug 2010 Location: Louisville, KY Posts: 8,274 Drives: 04 G35 - 2016 Z06 Rep Power: 31	Should be about a week left. Pre orders are available. __________________ Tunerz Store \| Uncover Your Vehicle's Potential 370z Intakes \| 370z Exhausts \| 370z Suspension \| 370z Brakes Tel: (844)8TUNERZ

06-03-2011, 07:46 PM	#3 (permalink)
Tunerz_Store A True Z Fanatic Join Date: Aug 2010 Location: Louisville, KY Posts: 8,274 Drives: 04 G35 - 2016 Z06 Rep Power: 31	Can you email me complete address. michael@tunerzstore.com __________________ Tunerz Store \| Uncover Your Vehicle's Potential 370z Intakes \| 370z Exhausts \| 370z Suspension \| 370z Brakes Tel: (844)8TUNERZ

06-04-2011, 02:01 AM	#4 (permalink)
JTTZR Base Member Join Date: Feb 2011 Location: Sydney Posts: 136 Drives: Renault Megane RS265 Rep Power: 15	Done. Thanks, mate. __________________ 2014 Renault Megane R.S. Cup 265 Pipercross Panel Filter // Fastchip Stage 1 ECU remap

06-10-2011, 08:20 PM	#7 (permalink)
KORRUPT Base Member Join Date: Apr 2011 Location: Ottawa Posts: 75 Drives: 09 MB 370Z Rep Power: 15	I got mine form wesellcarparts too. They respond to emails quickly and shipping was fast also. Highly recommend them. __________________ AFE / HPS / STILLEN CBE / AMS SS

06-12-2011, 08:17 PM	#8 (permalink)
WeSellCarPart Base Member Join Date: Aug 2009 Location: PA Posts: 233 Drives: All Rep Power: 16	Thanks for posting. If you need anything else, let me know. Also, HPS is back order - should be under 2 weeks out though. __________________ Authorized the370Z.com vendor Nissan 370Z Store at WeSellCarParts WeSellCarParts.com store

06-03-2011, 06:42 AM	#1 (permalink)
EVOnomore Enthusiast Member Join Date: May 2011 Location: CT USA Posts: 288 Drives: 2011,370Z,Sport,M6 Rep Power: 15	Had HKS Filters on my EvoX,and they performed better than any other filter according to the Dyno.

06-04-2011, 06:38 AM	#5 (permalink)
EVOnomore Enthusiast Member Join Date: May 2011 Location: CT USA Posts: 288 Drives: 2011,370Z,Sport,M6 Rep Power: 15	Corsport shipped mine very next day!

06-12-2011, 08:27 PM	#9 (permalink)
nynhex Base Member Join Date: Apr 2011 Location: Houston Posts: 247 Drives: 370z Rep Power: 372	I'm having such a hard time installing mine. Both tubes when lined up off the throttle body don't line up with the intake boxes or the breather hoses. I see ways I can cut them but seriously it's whacked. Can anyone offer some DETAILED pictures on how to make this happen? __________________ \|Berk\|Konig\|Nismo\|

06-12-2011, 09:21 PM	#11 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 220	Hmm I didnt have to make any big mods to the tubes to get them to fit....... Post pictures of you problem...... DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

06-14-2011, 01:50 AM	#13 (permalink)
JTTZR Base Member Join Date: Feb 2011 Location: Sydney Posts: 136 Drives: Renault Megane RS265 Rep Power: 15	Hey guys, I need some help. Having some real trouble getting the two small tension clamps loose. Any recommendations? No chance with pliers as they are impossible to reach... I'm no mechanic and I hope there is a stupidly simple answer. It's the middle tension clamps. (Picture is borrowed from before) __________________ 2014 Renault Megane R.S. Cup 265 Pipercross Panel Filter // Fastchip Stage 1 ECU remap

06-14-2011, 02:09 AM	#14 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 30	Are you referring to the little ones on the breather tube/plastic assembly? Do you have the strut bar off? Which one can you not reach? I used a long reach slanted set of needle nose piers, they worked great. If you can only access the lower tube (black hose with black clamp in the pic) then remove that one. You can unbolt the 10mm bolt holding the plastic assembly (far right in the pic) and it will come off with the stock intake tube. __________________ My TT Z

06-14-2011, 04:17 AM	#15 (permalink)
JTTZR Base Member Join Date: Feb 2011 Location: Sydney Posts: 136 Drives: Renault Megane RS265 Rep Power: 15	Thanks, I'll give it another go now. Those clamps are annoying - wish they'd gone for ones with a screw... __________________ 2014 Renault Megane R.S. Cup 265 Pipercross Panel Filter // Fastchip Stage 1 ECU remap

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
COBB Tuning Post MAF Tubes	hfrog355	Exhaust/Intake	1	03-03-2011 04:37 PM
FS: Cobb Post-MAF intake tubes (Black)	ArtVandaleigh	Parts for sale (Private Classifieds)	4	10-04-2010 10:14 PM
WTB: COBB post-Maf tubes - Black	kielbasa16	Parts for sale (Private Classifieds)	10	07-29-2010 09:05 AM
FS: Cobb Black Silicone Post-MAF Tubes	'10Anamoly	Parts for sale (Private Classifieds)	21	07-16-2010 07:39 AM