Would anyone ever consider Nitrous?

ZforMe · 03-01-2009, 10:34 PM

Just curious what everyone's opinion is about NOS. I found what would seem like a simple kit. HP to $$ is obviously very high.

Zex: '07-Current Nissan 350Z Nitrous Kit

frost · 03-01-2009, 10:55 PM

If you're into 1/4 racing, why not? Cheap yet powerful.

kdo2milger · 03-02-2009, 05:31 AM

it would definately get us in the 400 whp range with all bolt ons..

i consider nitrous a bolt on.

RCZ · 03-02-2009, 05:29 PM

umm, if I had a big turbo setup I might use NOS to help spool quicker.

tvfreakazoid · 03-02-2009, 05:40 PM

No bueno!

ssqpolo · 03-02-2009, 06:53 PM

ya man...why not. just dont go over a 75 shot and dont miss a shift!

MightyBobo · 03-05-2009, 06:31 PM

I think NOS is a great brand. Although, I preferred Nitrous Express.

frost · 03-05-2009, 07:48 PM

Quote:

Originally Posted by ssqpolo

ya man...why not. just dont go over a 75 shot and dont miss a shift!

I believe with the kits these days, those shifting worries are over. Nowadays they cut off unless you're on it if you buy the good kits.
Staying at a 75 shot does seem like a reasonable idea, I probably wouldnt push more than that, definitely not more than 100 without upgrades.

MightyBobo · 03-05-2009, 11:23 PM

Two words: Window Switch

4 more words: Fuel Pressure Safety Switch

Crash · 03-06-2009, 03:00 AM

Nitrous is perfectly safe... You can do a 150 shot on these blocks. You don't need bolt ons, but remember, you need bottle pressure. Like Mighty said, Fuel Pressure Safety Switch!

Nitrous is the cheapest horse power out there. And readily available all over the place. You can use 4 tethered 2.5Lbs bottles for maximum pressure and kick butt with it. A 100 shot is safe, but remember people, HP kills.

I may be getting a bottle too. But mine will be "Hush hush".

MightyBobo · 03-06-2009, 08:30 AM

I dont think the block is anything to worry about on a 150 shot. I'd be more worried about the bottom end, myself. That may potentially be a lot of stress to put on the stock, un-forged bottom end. LS1's can easily do a 150 shot, but a staged setup is better (starting at, say, 75, bumping up to a 150 after a certain RPM) to reduce the shock on the bottom end. I think a 150 shot would be a LOT to subject this motor to in stock form, and potentially dangerous until its been proven it MIGHT be able to handle it.

I guess the long and short is, I wouldn't run more than a 75 on stock tune, and no more than a 100 tuned until you start hearing stories about people blowing their bottom end due to stupidity. ESPECIALLY a dry shot, too - who knows how this fuel system will handle it, particularly with direct injection...

kdo2milger · 03-06-2009, 08:42 AM

is there enough room to hide a bottle where the spare tire is?

Crash · 03-06-2009, 08:41 PM

I agree. The stock bottom end will handle 500HP with FI, so 150 will be fine at higher RPM. You're right, a staged setup would be better. 75 is reasonable for the low RPM.

MightyBobo · 03-07-2009, 12:23 AM

Quote:

Originally Posted by Crash

I agree. The stock bottom end will handle 500HP with FI, so 150 will be fine at higher RPM. You're right, a staged setup would be better. 75 is reasonable for the low RPM.

Oh, I dont doubt that it can handle 500 HP FI - but theres a difference between a steady increase in power from turbo's spooling and whatnot, versus slamming an extra 150 horsepower down the motor's throat all of a sudden - its not hard to cause some nasty damage due to the shock effect

. Staged 75-150 would probably be perfectly safe, though.

Crash · 03-07-2009, 02:32 AM

^^^ Yeah. That's what I was saying...

03-01-2009, 10:34 PM	#1 (permalink)
ZforMe Base Member Join Date: Jan 2009 Location: Memphis TN Posts: 238 Drives: 370Z Sport Auto PG Rep Power: 16	Would anyone ever consider Nitrous? Just curious what everyone's opinion is about NOS. I found what would seem like a simple kit. HP to $$ is obviously very high. Zex: '07-Current Nissan 350Z Nitrous Kit

03-02-2009, 05:40 PM	#5 (permalink)
tvfreakazoid A True Z Fanatic Join Date: Jan 2009 Location: kommie kali Posts: 1,238 Drives: 2015 Audi S5; 6spd. Rep Power: 10324	No bueno! __________________ Mudders milk

03-06-2009, 03:00 AM	#10 (permalink)
Crash A True Z Fanatic Join Date: Dec 2008 Location: Los Angeles Posts: 1,853 Drives: 02 Corvette Z06 Rep Power: 589	Nitrous is perfectly safe... You can do a 150 shot on these blocks. You don't need bolt ons, but remember, you need bottle pressure. Like Mighty said, Fuel Pressure Safety Switch! Nitrous is the cheapest horse power out there. And readily available all over the place. You can use 4 tethered 2.5Lbs bottles for maximum pressure and kick butt with it. A 100 shot is safe, but remember people, HP kills. I may be getting a bottle too. But mine will be "Hush hush". __________________ 2002 Corvette Z06 - Totaled 2003 Corvette Z06 50th Anniversary

03-06-2009, 08:41 PM	#13 (permalink)
Crash A True Z Fanatic Join Date: Dec 2008 Location: Los Angeles Posts: 1,853 Drives: 02 Corvette Z06 Rep Power: 589	I agree. The stock bottom end will handle 500HP with FI, so 150 will be fine at higher RPM. You're right, a staged setup would be better. 75 is reasonable for the low RPM. __________________ 2002 Corvette Z06 - Totaled 2003 Corvette Z06 50th Anniversary

03-07-2009, 02:32 AM	#15 (permalink)
Crash A True Z Fanatic Join Date: Dec 2008 Location: Los Angeles Posts: 1,853 Drives: 02 Corvette Z06 Rep Power: 589	^^^ Yeah. That's what I was saying... __________________ 2002 Corvette Z06 - Totaled 2003 Corvette Z06 50th Anniversary

03-02-2009, 05:31 AM	#3 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 59	it would definately get us in the 400 whp range with all bolt ons.. i consider nitrous a bolt on.

03-02-2009, 05:29 PM	#4 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1118	umm, if I had a big turbo setup I might use NOS to help spool quicker.

03-02-2009, 06:53 PM	#6 (permalink)
ssqpolo Track Member Join Date: Jan 2009 Location: Florida Posts: 882 Drives: '12 Black Nismo Rep Power: 267	ya man...why not. just dont go over a 75 shot and dont miss a shift!

03-05-2009, 06:31 PM	#7 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	I think NOS is a great brand. Although, I preferred Nitrous Express.

03-05-2009, 11:23 PM	#9 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	Two words: Window Switch 4 more words: Fuel Pressure Safety Switch

03-06-2009, 08:30 AM	#11 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 52	I dont think the block is anything to worry about on a 150 shot. I'd be more worried about the bottom end, myself. That may potentially be a lot of stress to put on the stock, un-forged bottom end. LS1's can easily do a 150 shot, but a staged setup is better (starting at, say, 75, bumping up to a 150 after a certain RPM) to reduce the shock on the bottom end. I think a 150 shot would be a LOT to subject this motor to in stock form, and potentially dangerous until its been proven it MIGHT be able to handle it. I guess the long and short is, I wouldn't run more than a 75 on stock tune, and no more than a 100 tuned until you start hearing stories about people blowing their bottom end due to stupidity. ESPECIALLY a dry shot, too - who knows how this fuel system will handle it, particularly with direct injection...

03-06-2009, 08:42 AM	#12 (permalink)
kdo2milger OG Priesthood Join Date: Feb 2009 Location: Fargo, ND Posts: 17,859 Drives: NISMO T Rep Power: 59	is there enough room to hide a bottle where the spare tire is?