09-24-2016, 08:23 PM
|
#11 (permalink)
|
|
Base Member
Join Date: Feb 2015
Location: Wauconda, IL
Posts: 218
Drives: '13 370Z nismo
Rep Power: 23
|
Quote:
Originally Posted by Nismonerd
Found this thread while searching for cures for exhaust drone. Gave it a try today and the results are better than I expected. I've got a 2010 NISMO with HFCs and Beluga axle backs. The goal was to reduce the drone between 2500 to 3000rpm. I had the muffler shop install a side branch resonator on each side just before the axle back flanges. Using the formula found in this thread, each branch length is 28in, using 2.25in pipe and capped at the ends. I'm very happy with the results, as the drone at the target rpm range has been reduced by about 80%, and the entire rpm range sounds smoother.
I'm sure others have done this as well as this thread is pretty old. I wasn't aware of this method and just wanted to report that it does work. I know that some aftermarket exhausts come with the resonators, but never thought of fabricating them on exhausts that didn't include them.
The job cost me $125 including parts and labor.
|
Good stuff! Wish I saw this before I sold my Top Speed axle back. I had the exact same setup as you and LOVED the sound but cabin noise was too much.
Sold the axle back and got CNT cat back which had the helmholz canisters to eat drone, much like your added pipes. It is now good but your current setup is probably better!
Last edited by bbermann; 09-30-2016 at 08:52 AM.
|
|
|
Similar Threads
24Likes
Threaded Mode
