Stillen vs. Smoky: your take on intakes

Baker · 03-26-2010, 10:19 PM

Quote:

Originally Posted by theDreamer

~Any change other than the intake could change the results, but no way to truly know. It is technically an equal comparison since both ran with the same performance mods.

~The only "true" test on a dyno is hood closed, bumper on. Some will say for SRI setups a hood open run will represent a "more realistic" result, but with the hood open you are pumping in more air with that hood open where it would never get that air in the real world.

The tests that were posted were done with the hood down and bumper on, so they were as "Real World" as we could get. As far as the validity goes, we had the Stillen Intake installed, and it was driven roughly 30 miles and WOT multiple times before the Dyno. It was then switched to the TS, and the same was done. Its a fine line between letting the ECU adjust and not taking too much time in between tests. In the end, no test is perfect, but this is as close as anyone can get.

As far as the mod's are concerned, (and yes we are aware that some of these do not add power, but still should be disclosed) so far they are:

Either TS or Stillen Intake
Stillen HFC
Stillen Headers
Top Secret Exhaust
AP Racing Big Brake Kit
B&M Short Shifter
ACT Clutch Assembly
NST Pulley Kit
I-Forged 20" Spring Rims
and a few others that don't affect a dyno run.

In the end, we are all still surprised at the results. We welcome any other questions that you guys might have. Bottom line, for the current set up that we have, the TS intake reaps greater benefits than the Stillen. Both excellent products either way. Maybe we will redo these tests with more mod's on next week and a few forum members can come watch??? Up to you guys!

View Poll Results: Which intake do you think will come out on top?
Stillen G3	73	47.40%
Top Secret	48	31.17%
They will be essentially equal in HP gain.	33	21.43%
Voters: 154. You may not vote on this poll

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wtb - stillen exhaust / stillen intakes / berk cats	xbigb4ller69z	Wanted	0	03-24-2010 11:39 PM
WTB: Stillen G3 Intakes	phantom21	Parts for sale (Private Classifieds)	11	01-05-2010 01:29 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Australia/New Zealand	29	09-27-2009 12:53 PM
stillen gen. 3 intakes	mpp9	Wanted	7	09-22-2009 01:15 PM
FI 12" Exhaust - Stillen G3 Intakes - Stillen UD Pulley - GAINED 28kw or 37HP	bezzita	Engine & Drivetrain	6	09-06-2009 05:20 PM