Fast Intentions Long Tube Headers are here!

docaam · 02-24-2010, 12:18 PM

ok if these will fit G37coupe will these fit the 2007+ G35 sedan as well?

TARDCORE · 02-24-2010, 12:55 PM

I think they are different sizes for the Z and G. Thats why there are 2 group buy lists. These LTH can be legal in any state... you just gotta be willing to fork over the ca$h

F.I. Inc. · 02-24-2010, 04:46 PM

E.Johnson #025, your money is received. You will be added to the list.

For those of you wondering how he got on the list this late, real simple. We have been in talks for weeks and he committed to the group buy before it ended.

I just wanted to add this so no head scratching started...

Thank you, Tony

semtex · 02-24-2010, 04:51 PM

Quote:

Originally Posted by F.I. Inc.

E.Johnson #025, your money is received. You will be added to the list.

For those of you wondering how he got on the list this late, real simple. We have been in talks for weeks and he committed to the group buy before it ended.

I just wanted to add this so no head scratching started...

Thank you, Tony

And you think this little explanation of yours is going to pre-empt the conspiracy theories, do you? I fear you may be underestimating the level of paranoia on this forum, Tony. (I'm just kidding around.)

dainedazz · 02-24-2010, 06:16 PM

Quote:

Originally Posted by TARDCORE

I think they are different sizes for the Z and G. Thats why there are 2 group buy lists. These LTH can be legal in any state... you just gotta be willing to fork over the ca$h

yes sir ^^

F.I. Inc. · 02-24-2010, 08:59 PM

Quote:

Originally Posted by docaam

ok if these will fit G37coupe will these fit the 2007+ G35 sedan as well?

I have not test fit them on the Sedan yet. I am confident that they will fit though.

docaam · 02-25-2010, 03:05 AM

Quote:

Originally Posted by F.I. Inc.

I have not test fit them on the Sedan yet. I am confident that they will fit though.

can do a test fit on it as well once recieved...so another benchmark for you

F.I. Inc. · 02-25-2010, 09:16 AM

Quote:

Originally Posted by docaam

can do a test fit on it as well once recieved...so another benchmark for you

I am assuming that you want a set for your Sedan as well! Let's get you set up with the cat back as well.

mattkim85 · 02-25-2010, 03:19 PM

by the sound of the vids, they dont sound raspy...hmm..

maybe i'm so used to it being raspy with my hfcs.

can someone quote me on this?

docaam · 02-26-2010, 12:21 AM

Quote:

Originally Posted by F.I. Inc.

I am assuming that you want a set for your Sedan as well! Let's get you set up with the cat back as well.

what i was thinking if it gets too loud on Z i might test fit on the sedan...wont add cat back but a Y pipe will do

will keep you posted

F.I. Inc. · 02-26-2010, 12:42 PM

UPDATE-

I just received conformation that the tooling has shipped from Italy and will be state side sometime towards the end of next week. The distribution center will inspect the tooling to make sure that it is correct and then send it out to me (Hopefully) next Thursday or Friday. If that is the case, I should have the tooling within 2 weeks from today.

From there we need about 2-4 days to play with it and get all of the bends and rotations down. Once we have everything indexed, we will begin production.

The first set of fixtures/jigs will be completed by the end of today and I hope to have the second set of fixtures/jigs completed by the middle of next week. The reason we have decided to build 2 sets is to (Hopefully) speed production up! Obviously I have not built a production set yet. So, I can only try and calculate how long it will take to build each set. I am (hoping) that 2 people can produce 3-4 sets a day. We will not be working on them every single day due to the fact that we only have 4 people including (me) and we are almost two months behind just on cat back builds. I would like to have 5-8 sets mailed out every week if possible.

We at Fast Intentions, Inc. appreciate everyones continued patience...

Thank you, Tony

dainedazz · 02-26-2010, 05:14 PM

Quote:

Originally Posted by F.I. Inc.

UPDATE-

I just received conformation that the tooling has shipped from Italy and will be state side sometime towards the end of next week. The distribution center will inspect the tooling to make sure that it is correct and then send it out to me (Hopefully) next Thursday or Friday. If that is the case, I should have the tooling within 2 weeks from today.

From there we need about 2-4 days to play with it and get all of the bends and rotations down. Once we have everything indexed, we will begin production.

The first set of fixtures/jigs will be completed by the end of today and I hope to have the second set of fixtures/jigs completed by the middle of next week. The reason we have decided to build 2 sets is to (Hopefully) speed production up! Obviously I have not built a production set yet. So, I can only try and calculate how long it will take to build each set. I am (hoping) that 2 people can produce 3-4 sets a day. We will not be working on them every single day due to the fact that we only have 4 people including (me) and we are almost two months behind just on cat back builds. I would like to have 5-8 sets mailed out every week if possible.

We at Fast Intentions, Inc. appreciate everyones continued patience...

Thank you, Tony

E.Johnson · 02-27-2010, 06:05 AM

Quote:

Originally Posted by F.I. Inc.

UPDATE-

I just received conformation that the tooling has shipped from Italy and will be state side sometime towards the end of next week. The distribution center will inspect the tooling to make sure that it is correct and then send it out to me (Hopefully) next Thursday or Friday. If that is the case, I should have the tooling within 2 weeks from today.

From there we need about 2-4 days to play with it and get all of the bends and rotations down. Once we have everything indexed, we will begin production.

The first set of fixtures/jigs will be completed by the end of today and I hope to have the second set of fixtures/jigs completed by the middle of next week. The reason we have decided to build 2 sets is to (Hopefully) speed production up! Obviously I have not built a production set yet. So, I can only try and calculate how long it will take to build each set. I am (hoping) that 2 people can produce 3-4 sets a day. We will not be working on them every single day due to the fact that we only have 4 people including (me) and we are almost two months behind just on cat back builds. I would like to have 5-8 sets mailed out every week if possible.

We at Fast Intentions, Inc. appreciate everyones continued patience...

Thank you, Tony

There is a saying here in sweden:

If you are waiting for something good/nice, you will never wait too long..

The wait is no problem for me anyway, as long as I get them before my trip to Nürburgring =)

02-24-2010, 12:18 PM	#1 (permalink)
docaam A True Z Fanatic Join Date: Nov 2009 Location: Dubai Posts: 2,532 Drives: Z34/240z/Hakosuka Rep Power: 30	ok if these will fit G37coupe will these fit the 2007+ G35 sedan as well? __________________ Old 370Z SOLD but not forgotten 370Z 40th, G37s, S30 RBZ, Hakosuka Skyline

02-24-2010, 12:55 PM	#2 (permalink)
TARDCORE Enthusiast Member Join Date: Jul 2009 Location: San Diego Posts: 410 Drives: 2010 Solid Red 370Z Rep Power: 17	I think they are different sizes for the Z and G. Thats why there are 2 group buy lists. These LTH can be legal in any state... you just gotta be willing to fork over the ca$h __________________ XBL:EVENTYDE

02-24-2010, 04:46 PM	#3 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 687	*E.Johnson #025, your money is received. You will be added to the list.* For those of you wondering how he got on the list this late, real simple. We have been in talks for weeks and he committed to the group buy before it ended. I just wanted to add this so no head scratching started... Thank you, Tony __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION"

02-25-2010, 03:19 PM	#9 (permalink)
mattkim85 Base Member Join Date: Dec 2008 Location: los angeles, ca Age: 40 Posts: 230 Drives: 09 Z34, 08 AP2 Rep Power: 18	by the sound of the vids, they dont sound raspy...hmm.. maybe i'm so used to it being raspy with my hfcs. can someone quote me on this? __________________ Fast Intentions CBE 18" , Berk HFCs, Injen CAI, KW V3, Rear SPC Camber Kit, VOLK RE30's

02-26-2010, 12:42 PM	#11 (permalink)
F.I. Inc. The370Z.com Sponsor Join Date: Feb 2009 Location: Simi Valley, CA Posts: 2,989 Drives: 2010 GT-R/2007 F-250 Rep Power: 687	*UPDATE-* I just received conformation that the tooling has shipped from Italy and will be state side sometime towards the end of next week. The distribution center will inspect the tooling to make sure that it is correct and then send it out to me (Hopefully) next Thursday or Friday. If that is the case, I should have the tooling within 2 weeks from today. From there we need about 2-4 days to play with it and get all of the bends and rotations down. Once we have everything indexed, we will begin production. The first set of fixtures/jigs will be completed by the end of today and I hope to have the second set of fixtures/jigs completed by the middle of next week. The reason we have decided to build 2 sets is to (Hopefully) speed production up! Obviously I have not built a production set yet. So, I can only try and calculate how long it will take to build each set. I am (hoping) that 2 people can produce 3-4 sets a day. We will not be working on them every single day due to the fact that we only have 4 people including (me) and we are almost two months behind just on cat back builds. I would like to have 5-8 sets mailed out every week if possible. We at Fast Intentions, Inc. appreciate everyones continued patience... Thank you, Tony DRFTR likes this. __________________ *Follow us on Facebook: Fast Intentions Inc.* Phone: (805) 522-FAST (3278) Email: tony@fastintentions.com www.fastintentions.com "FUELED BY PASSION"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen III Ultra Long Tube Intakes Nissan 370Z FREE SHIPPING : IntensePOWER!	INTENSEPOWER	Exhaust/Intake	206	08-27-2010 02:41 PM
FS: Fast Intentions HFC's - Like New	Sonic370Z	Parts for sale (Private Classifieds)	8	10-01-2009 10:59 AM
New You Tube Video of Fast Intentions CBE 18" Resonators in CF	Aus370z	Australia/New Zealand	1	09-03-2009 11:57 PM
Stillen CBE vs Fast Intentions CBE?????	john370z	Intake/Exhaust	10	08-02-2009 09:12 PM
STILLEN G3 Ultra Long Tube Intake	nogoodname	Intake/Exhaust	117	03-17-2009 11:25 PM