Fast Intentions Long Tube Headers are here!

chuckd05 · 04-08-2011, 08:29 PM

Quote:

Originally Posted by Reaper42

I have mine on. HOLY SHITAKI MUSHROOMS BATMAN! More torque, smoother power band (from my butt dyno of course) and hell is it throatier and louder. This headers really put the cherry on top of an already awesome exhaust system, extremely happy. Other than the fact that I needed to get new O2 sensors which cost $330 a pop. Other than that, I feel like I am putting ferrari's to shame driving around. Car sounds unbelievable.

this is what I am scared of... Tony and others have said they have soaked them and has no problems , while others have said they are cross threaded from the factory...

if that happens to me I am going to angry!

Also, What seems to be the said amount of hours for the install and the price ?

wstar · 04-11-2011, 09:46 PM

I'm finally getting in on these too, soon as my order gets through the line

Vegitto-kun · 04-12-2011, 04:49 AM

Quote:

Originally Posted by chuckd05

this is what I am scared of... Tony and others have said they have soaked them and has no problems , while others have said they are cross threaded from the factory...

if that happens to me I am going to angry!

Also, What seems to be the said amount of hours for the install and the price ?

I had to get one new sensor. one came off without a problem but the second one wouldn't budge. soaked. heated nothing helped. tom was scared that he would ruin the thread on the cat for when we need to put the exhaust system back to stock for the checkup.

One_Quick_Z · 04-12-2011, 02:28 PM

Did mine ship out Tony?

DAN

wstar · 04-12-2011, 09:25 PM

Quote:

Originally Posted by Vegitto-kun

I had to get one new sensor. one came off without a problem but the second one wouldn't budge. soaked. heated nothing helped. tom was scared that he would ruin the thread on the cat for when we need to put the exhaust system back to stock for the checkup.

Back on my first header install, I also lost one sensor in the process. The second one we tried, we had much better success with though. I really think it came down to different techniques, rather than differences between the two. In both cases we tried WD-40 and applying heat with a torch (to the cat near the O2 hole, not to the sensor!

). The torch helps, but a longer soak time on the WD (before heating) helps even more. Getting the cat locked down in a good vise, and setting up a wrench on the O2 so that you can get a little impact on it (hammer + wrench) helps as well.

NewYorkJon34 · 04-14-2011, 08:07 PM

Tony, did my headers ship out yet?

One_Quick_Z · 04-15-2011, 08:55 AM

Mine will be here on the 19th!!!

DAN

NewYorkJon34 · 04-15-2011, 08:59 AM

Are you serious, mine were originally suppost to be here on the 12th, then I was "promised" they would ship out buy the 18th. I think I'm going to have to call Tony & see what's up. And yes, I know he's a busy guy...(no need to say it)

wstar · 04-15-2011, 10:31 AM

So much of this thread is people whining about ship dates. You know they're backordered and working their asses off to make your money. Anything under a month late when they're estimating 2 month backlogs is par for the course imho. Take a chill pill, nobody's going to die from a slightly late exhaust component

XwChriswX · 04-15-2011, 02:26 PM

Quote:

Originally Posted by NewYorkJon34

Are you serious, mine were originally suppost to be here on the 12th, then I was "promised" they would ship out buy the 18th. I think I'm going to have to call Tony & see what's up. And ya ya, I know he's a busy guy

You just answered your own question in the same post...

One_Quick_Z · 04-15-2011, 03:12 PM

I guess Im a lucky one then

Tony has been great and very nice/helpful when talking to him!

DAN

tsolin01 · 04-15-2011, 04:20 PM

I know it's the age of instant gratification and people are spoiled but gotta suck it up and wait. haha

NewYorkJon34 · 04-15-2011, 08:34 PM

Quote:

Originally Posted by wstar

Take a chill pill, nobody's going to die from a slightly late exhaust component

I'm perfectly chill bro, so don't worry about me. A lot of people misinterpret the tone of a post, it wasn't of anger but of just being surprised.

Quote:

Originally Posted by XwChriswX

You just answered your own question in the same post...

It wasn't a question, but just more of a statement, I've spoken to Tony plenty of times before & he knows I got much respect for him & his products, so

XwChriswX · 04-15-2011, 08:55 PM

Quote:

Originally Posted by NewYorkJon34

It wasn't a question, but just more of a statement, I've spoken to Tony plenty of times before & he knows I got much respect for him & his products, so

Okay, then if you have that respect then just sit back and let the man do his work, he'll get these headers and other parts done as soon as he can. 15 people going "Where's my stuff??" every day isn't going to get it made any sooner, not really a personal thing at you bud, just sayin there's a lot of people who come on these threads asking, and it's simple, when it's done, you'll be notified or it'll be shipped. Just let that be that...

NewYorkJon34 · 04-15-2011, 09:07 PM

I know I see it all the time on bullitts/GTM thread. Plus we're all men here, I learned not to take anything on this forum personality. If I'm excited about a new product I might post once every 2 weeks or so. I know they will be perfect & I be putting a review up of them. So I'll leave it as that...see ya in 2 weeks

04-11-2011, 09:46 PM	#1712 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	I'm finally getting in on these too, soon as my order gets through the line __________________ 7AT Track Car! Journal thread / Car setup details

04-12-2011, 02:28 PM	#1714 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 219	Did mine ship out Tony? DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

04-15-2011, 08:55 AM	#1717 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 219	Mine will be here on the 19th!!! DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

04-15-2011, 08:59 AM	#1718 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1064	Are you serious, mine were originally suppost to be here on the 12th, then I was "promised" they would ship out buy the 18th. I think I'm going to have to call Tony & see what's up. And yes, I know he's a busy guy...(no need to say it) Last edited by NewYorkJon34; 04-15-2011 at 08:37 PM.

04-15-2011, 10:31 AM	#1719 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	So much of this thread is people whining about ship dates. You know they're backordered and working their asses off to make your money. Anything under a month late when they're estimating 2 month backlogs is par for the course imho. Take a chill pill, nobody's going to die from a slightly late exhaust component __________________ 7AT Track Car! Journal thread / Car setup details

04-14-2011, 08:07 PM	#1716 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1064	Tony, did my headers ship out yet?

04-15-2011, 03:12 PM	#1721 (permalink)
One_Quick_Z A True Z Fanatic Join Date: May 2009 Location: Seneca Il Posts: 1,374 Drives: 10 Civic EX Sedan Rep Power: 219	I guess Im a lucky one then Tony has been great and very nice/helpful when talking to him! DAN __________________ -My BRZ with exhaust will decimate all if we overnight parts from Japan- 10 Civic EX Sedan- Current Daily

04-15-2011, 04:20 PM	#1722 (permalink)
tsolin01 Track Member Join Date: Feb 2010 Location: Dallas, TX Posts: 657 Drives: 2010 370Z Rep Power: 16	I know it's the age of instant gratification and people are spoiled but gotta suck it up and wait. haha __________________ SOLD 12/30/2011 2010 370Z Coupe Monterey Blue 6MT/Touring/Sport/Nav F.I. CBE CF w/ 12" Res \| V1 \| SecondSkin \| Stillen G3 \| EVO-R CF B-Pillars \| Volk GT-S Ti Gunmetal 19x9.5 +30 F, 19x10.5 +8 R \| Swift Spec-R Springs

04-15-2011, 09:07 PM	#1725 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1064	I know I see it all the time on bullitts/GTM thread. Plus we're all men here, I learned not to take anything on this forum personality. If I'm excited about a new product I might post once every 2 weeks or so. I know they will be perfect & I be putting a review up of them. So I'll leave it as that...see ya in 2 weeks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen Gen III Ultra Long Tube Intakes Nissan 370Z FREE SHIPPING : IntensePOWER!	INTENSEPOWER	Exhaust/Intake	206	08-27-2010 02:41 PM
FS: Fast Intentions HFC's - Like New	Sonic370Z	Parts for sale (Private Classifieds)	8	10-01-2009 10:59 AM
New You Tube Video of Fast Intentions CBE 18" Resonators in CF	Aus370z	Australia/New Zealand	1	09-03-2009 11:57 PM
Stillen CBE vs Fast Intentions CBE?????	john370z	Intake/Exhaust	10	08-02-2009 09:12 PM
STILLEN G3 Ultra Long Tube Intake	nogoodname	Intake/Exhaust	117	03-17-2009 11:25 PM