Motordyne and Z1 port?

Spstone · 06-20-2016, 08:55 AM

Has any had their motordyne intake ported by Z1? I had emailed them about it and they said they had done it before and it was possible but had no idea on what kind of power it created. Have any of you had the port done on a motordyne and can share the results? I would hate to spend 600+ on a motordyne that would give simaler results to a Z1 porting and than another 250 for the port to have not results.

Last stupid question going through the forum on the motordyne i see missed answers on being able to get the stock engine cover back over the motordyne intake. Can any one confirm I could put my stock cover back versus that little plexiglass plate I've seen?

DEpointfive0 · 06-20-2016, 09:00 AM

My DE.50 equivalent manifold was ported by Z1, not a clue how much power it makes over just my manifold, sorry

Spstone · 06-20-2016, 09:07 AM

The butt dyno feel any difference?

mag_black · 06-20-2016, 01:28 PM

I have the Z1. I didn't feel much of a difference. I also did a retune. I lost power from my last dyno, it could be the environment so take it w/ a grain of salt. Same dyne, different day...

abm89 · 06-20-2016, 01:33 PM

Quote:

Originally Posted by Spstone

Last stupid question going through the forum on the motordyne i see missed answers on being able to get the stock engine cover back over the motordyne intake. Can any one confirm I could put my stock cover back versus that little plexiglass plate I've seen?

I would say all of the MD Manifold Zs i've seen have the plate installed or nothing. None had the original cover.

I think it wouldn't require much modification to get it to work, i know a few of the Z/G engine covers are interchangable.

solidus · 06-20-2016, 02:08 PM

I had a motordyne IM on my G37 and I was able to fit my engine cover however the cover on my Nismo is 2 piece and my G's cover was one piece.

Wonka2581 · 06-20-2016, 02:24 PM

Sub'd

12nismo · 06-20-2016, 03:35 PM

Quote:

Originally Posted by Spstone

Has any had their motordyne intake ported by Z1? I had emailed them about it and they said they had done it before and it was possible but had no idea on what kind of power it created. Have any of you had the port done on a motordyne and can share the results? I would hate to spend 600+ on a motordyne that would give simaler results to a Z1 porting and than another 250 for the port to have not results.

Last stupid question going through the forum on the motordyne i see missed answers on being able to get the stock engine cover back over the motordyne intake. Can any one confirm I could put my stock cover back versus that little plexiglass plate I've seen?

I had my factory nismo engine cover installed when I was running the MD manifold...no fitment issues.

Spstone · 06-20-2016, 04:38 PM

Thanks 12Nismo, I know that should not be a real factor but to me it is.

hooey_b · 06-20-2016, 05:47 PM

From what I've heard, Z1 makes more top end power, but the Motordyne gives more mid-range.

Eighties Meta · 06-21-2016, 11:41 PM

I wish i never got the motordyne m370. Port your stock one as that has proven results already.

Sent from my SAMSUNG-SM-G870A using Tapatalk

DEpointfive0 · 06-22-2016, 12:58 AM

Quote:

Originally Posted by Eighties Meta

I wish i never got the motordyne m370. Port your stock one as that has proven results already.

Sent from my SAMSUNG-SM-G870A using Tapatalk

Why? It has great gains...

My DE.50 manifold is exactly the same and it performed amazing

Zbrah · 06-22-2016, 01:11 AM

What is this DE.50 many fold i keep hearing? Need more details!

DEpointfive0 · 06-22-2016, 01:32 AM

Quote:

Originally Posted by Zbrah

What is this DE.50 many fold i keep hearing? Need more details!

You have my number... Lol

jchammond · 06-22-2016, 02:27 AM

I see you're in Wilmington NC,,,I used to deliver to the Wilson store's years ago.
This is a very SUCK time of year to get good dyno results/unless you had your's dyno'd or tuned in the heat.
Had my ~Z~ dyno-tuned@Z1 in middle of May;after driving 200+ miles & number's were lower than i expected (309rwhp),,,it was lunchtime before they began & temp was warm....I have only a stock plenum for now,so can't speak for the ported one's.
Good luck if you go that route & dyno right before you swap intake & re-dyno to see results.......that's about the best way-pending weather conditions.

06-20-2016, 08:55 AM	#1 (permalink)
Spstone Enthusiast Member Join Date: Aug 2015 Location: Wilmington, nc Posts: 354 Drives: 14 370Z Nismo 6MT PW Rep Power: 9	Motordyne and Z1 port? Has any had their motordyne intake ported by Z1? I had emailed them about it and they said they had done it before and it was possible but had no idea on what kind of power it created. Have any of you had the port done on a motordyne and can share the results? I would hate to spend 600+ on a motordyne that would give simaler results to a Z1 porting and than another 250 for the port to have not results. Last stupid question going through the forum on the motordyne i see missed answers on being able to get the stock engine cover back over the motordyne intake. Can any one confirm I could put my stock cover back versus that little plexiglass plate I've seen?

06-20-2016, 09:00 AM	#2 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	My DE.50 equivalent manifold was ported by Z1, not a clue how much power it makes over just my manifold, sorry ANMVQ and Wonka2581 like this. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

06-20-2016, 01:28 PM	#4 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	I have the Z1. I didn't feel much of a difference. I also did a retune. I lost power from my last dyno, it could be the environment so take it w/ a grain of salt. Same dyne, different day... Mysilverz likes this. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

06-20-2016, 02:24 PM	#7 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2611	Sub'd __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

06-21-2016, 11:41 PM	#11 (permalink)
Eighties Meta Enthusiast Member Join Date: Aug 2012 Location: Pasadena, MD Age: 54 Posts: 344 Drives: 09 370z 7AT no-sport Rep Power: 12	I wish i never got the motordyne m370. Port your stock one as that has proven results already. Sent from my SAMSUNG-SM-G870A using Tapatalk __________________ 2009 370z Touring 7AT/AAM 2.5 true dual exhaust/AAM DE test pipes/z1 vqde35 headers/AAM cold air intake (R-line)/Motordyne M370/Quaife LSD/z1 brake upgd pkg/Swift Spec-R springs/WhiteLine Front&Rear sway bars with endlinks

06-20-2016, 09:07 AM	#3 (permalink)
Spstone Enthusiast Member Join Date: Aug 2015 Location: Wilmington, nc Posts: 354 Drives: 14 370Z Nismo 6MT PW Rep Power: 9	The butt dyno feel any difference?

06-20-2016, 02:08 PM	#6 (permalink)
solidus Track Member Join Date: Oct 2014 Location: Orlando, Florida Posts: 694 Drives: 15' Nismo Black 6MT Rep Power: 10080	I had a motordyne IM on my G37 and I was able to fit my engine cover however the cover on my Nismo is 2 piece and my G's cover was one piece.

06-20-2016, 04:38 PM	#9 (permalink)
Spstone Enthusiast Member Join Date: Aug 2015 Location: Wilmington, nc Posts: 354 Drives: 14 370Z Nismo 6MT PW Rep Power: 9	Thanks 12Nismo, I know that should not be a real factor but to me it is.

06-20-2016, 05:47 PM	#10 (permalink)
hooey_b Base Member Join Date: May 2015 Location: Atlanta Posts: 126 Drives: 2008 G37S 6MT Rep Power: 9	From what I've heard, Z1 makes more top end power, but the Motordyne gives more mid-range.

06-22-2016, 01:11 AM	#13 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5451	What is this DE.50 many fold i keep hearing? Need more details! __________________

06-22-2016, 02:27 AM	#15 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	I see you're in Wilmington NC,,,I used to deliver to the Wilson store's years ago. This is a very SUCK time of year to get good dyno results/unless you had your's dyno'd or tuned in the heat. Had my ~Z~ dyno-tuned@Z1 in middle of May;after driving 200+ miles & number's were lower than i expected (309rwhp),,,it was lunchtime before they began & temp was warm....I have only a stock plenum for now,so can't speak for the ported one's. Good luck if you go that route & dyno right before you swap intake & re-dyno to see results.......that's about the best way-pending weather conditions. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Motordyne M370 w/Motordyne Black Top Plate	g35man04	Parts for sale (Private Classifieds)	4	01-22-2015 07:28 AM
[FOR SALE] Motordyne M370, Motordyne ART pipes, Stillen G3 Intakes	Boost_lee	Parts for sale (Private Classifieds)	27	01-15-2015 02:18 PM
OBD-II Port	delusional	DIY Section (Do-It-Yourself)	3	04-16-2012 04:27 PM
USB Port	Calvin	Audio & Video	7	02-24-2012 08:11 PM
Where's the USB port?	Phimosis	Audio & Video	10	06-13-2009 02:49 PM