AAM Competition VQ37 Intake Manifold Pre-sale!!!

zguynate · 07-06-2016, 10:50 AM

I'm sure a dyno sheet will be shown once they have one of these in hand. I may be naive, but I don't think AAM is going to let us down. All of their other products are top notch. I doubt this one will be any different.

beauz · 07-10-2016, 12:32 AM

Keen to see what this can do in n/a application. Any gains above 4000rpm would be welcome.

Elmo370z · 07-10-2016, 12:43 AM

Quote:

Originally Posted by beauz

Keen to see what this can do in n/a application. Any gains above 4000rpm would be welcome.

You're going to be highly disappointed my friend. Unless you plan on dumping a bunch of money into a Na set up, the gains for the cost can't be justified. This is mainly for the boosted crowd. But i guess we won't truly find out until it is tested by multiple people.

Z eliminator · 07-11-2016, 04:59 PM

Just to let you guys in on some intake results.
GTR manifold set up on N/A does not make any more power or quick times at the track.
M370 set up will kick it down the 1/4 mile.
Those intakes are made for forced induction.
AMM will be the same as the GTR for power on N/A
actually they both will make less depending what RPM you are at.
But on forced induction they will make a lot more power than the stock set up.
I was told this 2 years ago.

Z

michaeld@aamc · 07-12-2016, 10:39 AM

I know its not dyno charts as everyone and myself are awaiting, but almost there!

madeinjapan · 07-12-2016, 10:58 AM

Quote:

Originally Posted by beauz

Keen to see what this can do in n/a application. Any gains above 4000rpm would be welcome.

there are way better things to buy for an n/a car with this kind of money

*like a turbo

V1H · 07-12-2016, 11:04 AM

Thx for the update Michael. Looking good
Im curious, how much weight do these add over the stock plastic plenum?

Sent from my iPhone using Tapatalk

Nismodean · 07-12-2016, 03:14 PM

Holy cow I forgot about this thread and just now saw it, they still don't have a Dyno out!?!? Haha! Do the preorder guys even have them yet?

beauz · 07-12-2016, 04:29 PM

Quote:

Originally Posted by Elmo370z

You're going to be highly disappointed my friend. Unless you plan on dumping a bunch of money into a Na set up, the gains for the cost can't be justified. This is mainly for the boosted crowd. But i guess we won't truly find out until it is tested by multiple people.

Im not spending the coin just yet. Just keen to see the results. Im more excited for CJM's version. I think the key will be how well you can integrate the upper and lower so that there is no lip to disturb airflow where it joins the lower. Aam mentions a 55% increase in runner flow so we will have to wait and see. I would like to see a runner with a shape that matches cylinder head port instead of a square to oval. But that means new lower and upper design of course.

beauz · 07-12-2016, 04:42 PM

Quote:

Originally Posted by madeinjapan

there are way better things to buy for an n/a car with this kind of money

*like a turbo

Point me in the direction of a $2k turbo kit. Turbo kit and install is alot of cash. And then you have to control that heat on track (for those of us who track) and then instead of racing In <4L na class id be racing in open modified class. Everyone has a plan for what they want to achieve with their Z. Mine does not involve forced induction.

michaeld@aamc · 07-14-2016, 08:46 AM

Quote:

Originally Posted by V1H

Thx for the update Michael. Looking good
Im curious, how much weight do these add over the stock plastic plenum?

Sent from my iPhone using Tapatalk

My pleasure! Very good question, I will weigh both units once I have them in hand and post all information; including dyno sheets!

Should be soon

wideglideleon · 07-14-2016, 01:01 PM

madeinjapan · 07-14-2016, 01:02 PM

Quote:

Originally Posted by beauz

Point me in the direction of a $2k turbo kit. Turbo kit and install is alot of cash. And then you have to control that heat on track (for those of us who track) and then instead of racing In <4L na class id be racing in open modified class. Everyone has a plan for what they want to achieve with their Z. Mine does not involve forced induction.

beauz · 07-16-2016, 07:19 PM

Quote:

Originally Posted by madeinjapan

....No

Bakseedaa · 07-22-2016, 02:29 PM

Any news Michaeld ? This is taking some serious time.... Considering you have took people's money for well over 3 months you give out very little information. If I ran my business like you do I would have very few customers

07-06-2016, 10:50 AM	#181 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,053 Drives: 09 370z Rep Power: 73	I'm sure a dyno sheet will be shown once they have one of these in hand. I may be naive, but I don't think AAM is going to let us down. All of their other products are top notch. I doubt this one will be any different. Bakseedaa, scope22, 1cintron and 2 others like this. __________________ 2009 370z touring w/sports package

07-11-2016, 04:59 PM	#184 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 18	Just to let you guys in on some intake results. GTR manifold set up on N/A does not make any more power or quick times at the track. M370 set up will kick it down the 1/4 mile. Those intakes are made for forced induction. AMM will be the same as the GTR for power on N/A actually they both will make less depending what RPM you are at. But on forced induction they will make a lot more power than the stock set up. I was told this 2 years ago. Z cv129 likes this. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

07-12-2016, 10:39 AM	#185 (permalink)
michaeld@aamc A True Z Fanatic Join Date: Oct 2015 Location: Annapolis Junction, Mar Posts: 1,208 Drives: Nissan / Infiniti Rep Power: 20	I know its not dyno charts as everyone and myself are awaiting, but almost there! zguynate likes this. __________________ Michael Deen \| Sales & Marketing Associate AAM Competition, LLC (301)497-9216 Michaeld@aamcompetition.com

07-12-2016, 11:04 AM	#187 (permalink)
V1H Base Member Join Date: Dec 2013 Location: United Kingdom Posts: 244 Drives: 2013 370Z-TT GT Edt Rep Power: 3366	AAM Competition VQ37 Intake Manifold Pre-sale!!! Thx for the update Michael. Looking good Im curious, how much weight do these add over the stock plastic plenum? Sent from my iPhone using Tapatalk michaeld@aamc likes this. __________________ 501 BHP, 590 Nm (422 rwhp) *AAM* TT+I/Plenum\|*CJM* S1 FRS\|*C/Clutch* Stage 2\|*RJM* CMC\|*ZSpeed* CSC\|Z1 Oil cooler\|*Motordyne* Turbo ShockWave)))\|*Torqen* Coilovers\|*Stanceparts* AirCups\|*Amuse* bodykit\|*GReddy\|AEM\|ONEighty\|Mishimoto\|STILLEN\|Eibach\|SPL\|B&M\|Radium\|EcuTek\|BC Forged* RS45

07-12-2016, 03:14 PM	#188 (permalink)
Nismodean Enthusiast Member Join Date: Oct 2010 Location: Washington Posts: 313 Drives: 2009 RIP Now 2012 Rep Power: 14	Holy cow I forgot about this thread and just now saw it, they still don't have a Dyno out!?!? Haha! Do the preorder guys even have them yet? wideglideleon likes this. __________________ The Truth, it hurts sometimes. FI LTH & FI CF CBE. This is a 370Z forum, if I want to fling poo at another brand of car and your feelings get hurt, then you're hanging out in the wrong forum (cry elsewhere).

07-10-2016, 12:32 AM	#182 (permalink)
beauz Base Member Join Date: Apr 2012 Location: australia Posts: 58 Drives: 09 370Z bs m6 Rep Power: 13	Keen to see what this can do in n/a application. Any gains above 4000rpm would be welcome.

07-14-2016, 01:01 PM	#192 (permalink)
wideglideleon Track Member Join Date: Apr 2015 Location: Tucson AZ Posts: 569 Drives: SC 09 370Z LG 7AT Rep Power: 64085	Elmo370z likes this.

07-22-2016, 02:29 PM	#195 (permalink)
Bakseedaa Base Member Join Date: Dec 2010 Location: Uk Posts: 38 Drives: 370z Black Edition Rep Power: 14	Any news Michaeld ? This is taking some serious time.... Considering you have took people's money for well over 3 months you give out very little information. If I ran my business like you do I would have very few customers Chuck33079 and octet like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Oem parts for sale-intake manifold, clutch, flyweel, shifter, racing termostat	N370	Parts for sale (Private Classifieds)	14	05-17-2016 09:18 AM
selling used stillen G3 intake.Motordyne M370 Intake Manifold	01206	Canada	4	04-14-2016 01:31 AM
*Pre Order* AAM COMPETITION VQ37 PERFORMANCE INTAKE MANIFOLD	vividracing	Drivetrain/Engine	11	01-15-2016 04:02 PM
[FOR SALE] Kinetix Intake Manifold - VQ37	Greedy	Parts for sale (Private Classifieds)	49	03-22-2013 10:47 AM
[FOR SALE] Motordyne M370 Intake Manifold for sale	Mr.Squeeze	Parts for sale (Private Classifieds)	9	07-09-2011 12:19 AM