Early Easter Egg- New AAM Competition 370Z/G37 Product!

shadow85 · 02-14-2017, 05:55 AM

Actually looks nice. I would probably buy it if I had the cash. Probably will later on in the year!!

BTW AAM have been helpful and great at communicating with me!

Guys why is everyone being haters? They should be greatful that a company like AAM are going out of their way to continue to make and research into products into our beloved Zs. Why does everyone expect a company to make and release a product that craps out high HP at low cost, the most ideal situations can't always be created, a company can only try to get their as best as possible. Not everything can be perfect, even if there arn't any defects in the product.

Anways waiting on some AAM products myself, hoping it is as good as I hear it is! I have faith in them.

Peace guys...

gomer_110 · 02-14-2017, 06:59 AM

Quote:

Originally Posted by shadow85

Actually looks nice. I would probably buy it if I had the cash. Probably will later on in the year!!

BTW AAM have been helpful and great at communicating with me!

Guys why is everyone being haters? They should be greatful that a company like AAM are going out of their way to continue to make and research into products into our beloved Zs. Why does everyone expect a company to make and release a product that craps out high HP at low cost, the most ideal situations can't always be created, a company can only try to get their as best as possible. Not everything can be perfect, even if there arn't any defects in the product.

Anways waiting on some AAM products myself, hoping it is as good as I hear it is! I have faith in them.

Peace guys...

Because computers. With the wonders of 3D CAD/solid modeling, CFD, and 3D printing there's no reason a prototype manifold shouldn't come to fruition in just a few weeks with just a little fine tuning required. You then slap the prototype on a test car and voila, results.

Patrick@AAMComp · 02-14-2017, 11:36 AM

Quote:

Originally Posted by gomer_110

Because computers. With the wonders of 3D CAD/solid modeling, CFD, and 3D printing there's no reason a prototype manifold shouldn't come to fruition in just a few weeks with just a little fine tuning required. You then slap the prototype on a test car and voila, results.

All of these modern technologies are truly amazing resources, which we use regularly. The casting process is by far the most time consuming part of this particular project. Creating a custom cast mold for production requires a substantial investment of both time and money.

Patrick@AAMComp · 02-14-2017, 11:33 AM

Quote:

Originally Posted by shadow85

Actually looks nice. I would probably buy it if I had the cash. Probably will later on in the year!!

BTW AAM have been helpful and great at communicating with me!

Guys why is everyone being haters? They should be greatful that a company like AAM are going out of their way to continue to make and research into products into our beloved Zs. Why does everyone expect a company to make and release a product that craps out high HP at low cost, the most ideal situations can't always be created, a company can only try to get their as best as possible. Not everything can be perfect, even if there arn't any defects in the product.

Anways waiting on some AAM products myself, hoping it is as good as I hear it is! I have faith in them.

Peace guys...

Appreciate the support!

JARblue · 02-14-2017, 01:39 PM

Quote:

Originally Posted by shadow85

Anways waiting on some AAM products myself, hoping it is as good as I hear it is! I have faith in them.

What did you hear that leads you to have faith in them?

shadow85 · 02-14-2017, 04:07 PM

Quote:

Originally Posted by JARblue

What did you hear that leads you to have faith in them?

They have good exhaust manifolds and great performing TT kits. As good as the FI TT kits I hear.

1cintron · 02-14-2017, 09:34 PM

Quote:

Originally Posted by shadow85

They have good exhaust manifolds and great performing TT kits. As good as the FI TT kits I hear.

This is the kind of quality you can expect: AAM Competition VQ37 Intake Manifold Pre-sale!!!

TreeSemdyZee · 02-14-2017, 10:30 PM

Quote:

Originally Posted by 1cintron

This is the kind of quality you can expect: AAM Competition VQ37 Intake Manifold Pre-sale!!!

You couldn't even write a script this bad.

Chuck33079 · 02-15-2017, 07:14 AM

Quote:

Originally Posted by 1cintron

This is the kind of quality you can expect: AAM Competition VQ37 Intake Manifold Pre-sale!!!

Hey Patrick, let me guess - this was a one-off preproduction model and in no way indicative of the finish of the current production item, right? Nothing to see here, move along?

Tell us again why yours is in any way better than the alternatives? It looks bad, the inside is chock full of casting imperfections and it makes very little power compared to other options. Let's be real - you could have very easily cleaned up that manifold. You just chose not to. Your company looked at that and found it perfectly acceptable to send to a customer in that state.

OptionZero · 02-15-2017, 04:27 PM

Quote:

Originally Posted by shadow85

Actually looks nice. I would probably buy it if I had the cash. Probably will later on in the year!!

BTW AAM have been helpful and great at communicating with me!

Guys why is everyone being haters? They should be greatful that a company like AAM are going out of their way to continue to make and research into products into our beloved Zs. Why does everyone expect a company to make and release a product that craps out high HP at low cost, the most ideal situations can't always be created, a company can only try to get their as best as possible. Not everything can be perfect, even if there arn't any defects in the product.

Anways waiting on some AAM products myself, hoping it is as good as I hear it is! I have faith in them.

Peace guys...

this dude endorsing the product is all you the warning you need not to buy it

shadow85 · 02-15-2017, 06:26 PM

Quote:

Originally Posted by OptionZero

this dude endorsing the product is all you the warning you need not to buy it

Why is that. I am not really trying to endorse it as I have not had any AAM products used in my Z yet. I am just going by what I have heard and I hope the products are as good as I hear they are when I get them.

I took the plunge because I have faith in them. I could be totally shocked and dissapointed, or I could be pleased. I don't know yet till I have the kit and installed.

Will be about another 2-3 months till I have it all done I rekon.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Early Eater Egg- New AAM Competition 370Z/G37 Product!!	Sales@AAMComp	AAM Competition	3	01-15-2016 11:12 PM
NEW PRODUCT! AAM Competition Axleback Exhaust	Jerm@AAMComp	Intake/Exhaust	17	07-22-2014 12:18 AM
NEW PRODUCT! AAM Competition 370Z and G37 3" True Dual Exhaust System	Jerm@AAMComp	Intake/Exhaust	44	05-11-2014 04:09 PM
It's a little early but I'm thinking about which 370z should I get	andre12031948	Track / Autocross / Drifting / Dragstrip	17	10-27-2013 08:45 PM
How early is too early for synthetic?	IsaacSG31	Nissan 370Z General Discussions	29	05-31-2012 10:52 PM

02-14-2017, 05:55 AM	#1 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 921 Drives: 15' 370Z A/T AMM TT Rep Power: 27	Actually looks nice. I would probably buy it if I had the cash. Probably will later on in the year!! BTW AAM have been helpful and great at communicating with me! Guys why is everyone being haters? They should be greatful that a company like AAM are going out of their way to continue to make and research into products into our beloved Zs. Why does everyone expect a company to make and release a product that craps out high HP at low cost, the most ideal situations can't always be created, a company can only try to get their as best as possible. Not everything can be perfect, even if there arn't any defects in the product. Anways waiting on some AAM products myself, hoping it is as good as I hear it is! I have faith in them. Peace guys...