Eps big bore TB's

juicinjake · 06-01-2016, 01:24 PM

Quote:

Originally Posted by lj909

Well i bought Dieselg37s and got them installed. I'm trying to get something scheduled with Seb. The idle gets kinda wacky even after idle relearn. Just to much air going in at idle. But other then idle it runs with new life! My butt dyno says more mid range! Once i get over to Seb and get some numbers I'll post them.

As for those 75mm maxima throttles, I'm not sure they'd fit under the bar. And for the wiring, the eps throttles come with an adaptor harness for the one side.

your problem is that the car just needs more tuning. i have successfully tuned over half a dozen cars to a smooth idle using these throttle bodies. a lazy tuner will not be able to recalibrate these. you are going to have to tune the mafs. most idle troubles result from a voltage imbalance between the two mafs in the tubes. with ecutek, its easy to work around this bc it has two maf tables, without it, the tubes must be clocked. your tuner really needs to know what he is doing if he is putting on big tbs and intake tubes, or your end results arent going to be as good as they are for other people.

lj909 · 06-01-2016, 02:42 PM

Quote:

Originally Posted by juicinjake

your problem is that the car just needs more tuning. i have successfully tuned over half a dozen cars to a smooth idle using these throttle bodies. a lazy tuner will not be able to recalibrate these. you are going to have to tune the mafs. most idle troubles result from a voltage imbalance between the two mafs in the tubes. with ecutek, its easy to work around this bc it has two maf tables, without it, the tubes must be clocked. your tuner really needs to know what he is doing if he is putting on big tbs and intake tubes, or your end results arent going to be as good as they are for other people.

I already have ecutek, i just haven't gotten over to my tuner yet. Thanx for the input.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] JE Pistons 95.5mm Bore 10.0 comp	Nut_N_Much	Parts for sale (Private Classifieds)	7	02-11-2015 07:07 PM
[WTB] Lower intake manifolds! Uppers and TB's welcome!!	synolimit	Parts for sale (Private Classifieds)	0	11-19-2014 02:02 AM
Smokeys dyno, ported TB's, manifolds etc	synolimit	Tuning	8	08-15-2014 11:11 AM
who can bore out a tb?	edub370	Engine & Drivetrain	64	01-22-2014 03:09 AM