A little problem...

Zbrah · 12-11-2015, 02:46 AM

Need some ideas how to remove the rest of the studs from the pipe so I can put in new bolts.

Wonka2581 · 12-11-2015, 05:36 AM

You have a few options,

1) Sears.com

2) try to drill it out..

3) Vice-Grips and blow torch

4) Buy lots of beer and invite all your friends over, get them drunk and watch them attempt to get them out..

Good luck...

POS VETT · 12-11-2015, 05:42 AM

Are the studs welded or do they have a knurl under the head?

barncobob · 12-11-2015, 06:14 AM

take it to a machine shop, they can do anything with metal

SouthArk370Z · 12-11-2015, 06:19 AM

They look like pressed in studs. If they are, you should be able to knock them out with a hammer.

2011 Nismo#91 · 12-11-2015, 07:15 AM

Quote:

Originally Posted by SouthArk370Z

They look like pressed in studs. If they are, you should be able to knock them out with a hammer.

birdman71 · 12-11-2015, 10:41 AM

Quote:

Originally Posted by Wonka2581

You have a few options,

1) Sears.com

2) try to drill it out..

3) Vice-Grips and blow torch

4) Buy lots of beer and invite all your friends over, get them drunk and watch them attempt to get them out..

Good luck...

Can I come over? haha

Zbrah · 12-11-2015, 10:52 AM

Quote:

Originally Posted by POS VETT

Are the studs welded or do they have a knurl under the head?

The back side of the studs are round and looks to be pressed in by Godzilla. Nissan sure love to make everything more difficult

Quote:

Originally Posted by Wonka2581

You have a few options,

1) Sears.com

2) try to drill it out..

3) Vice-Grips and blow torch

4) Buy lots of beer and invite all your friends over, get them drunk and watch them attempt to get them out..

Good luck...

Thanks for the tips but I don't think my 12V black and decker has enough juice to drill through this lol

Quote:

Originally Posted by SouthArk370Z

They look like pressed in studs. If they are, you should be able to knock them out with a hammer.

Okay thanks, I'm going to try hammering it out. If not I'm taking it to machine shop. Thanks guys!

kenchan · 12-11-2015, 11:02 AM

Quote:

Originally Posted by SouthArk370Z

They look like pressed in studs. If they are, you should be able to knock them out with a hammer.

Quote:

Originally Posted by 2011 Nismo#91

id try first banging it out with a smaller sledge.

barncobob · 12-11-2015, 01:46 PM

get a BFH.......big frig... hammer

Elmo370z · 12-11-2015, 01:53 PM

pb blast over night

Spooler · 12-11-2015, 09:39 PM

The stud is spot welded in. Torch it.

zmanelite · 12-11-2015, 11:52 PM

I would cut and grind down flush
Use a punch to get it centered and after grab s nice sharp drill bit and go at it , use lube and keep speed slow

Zbrah · 12-12-2015, 12:06 AM

Quote:

Originally Posted by Spooler

The stud is spot welded in. Torch it.

Quote:

Originally Posted by zmanelite

I would cut and grind down flush
Use a punch to get it centered and after grab s nice sharp drill bit and go at it , use lube and keep speed slow

Well, I was planning to do exactly that but if it's welded on like spooler said I'm taking it to a muffler shop and see what they can do. Thanks

JARblue · 12-12-2015, 03:36 AM

What is that pipe? Looks like a mid-pipe of some sort. Kevin at Austin Z Clinic just hammered my broken exhaust bolts out with a metal hammer (small sledge like Kenchan suggested). That's what I'd try first. Nice and cheap

12-11-2015, 02:46 AM	#1 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5451	A little problem... Need some ideas how to remove the rest of the studs from the pipe so I can put in new bolts. __________________

12-11-2015, 05:36 AM	#2 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2611	You have a few options, 1) Sears.com 2) try to drill it out.. 3) Vice-Grips and blow torch 4) Buy lots of beer and invite all your friends over, get them drunk and watch them attempt to get them out.. Good luck... Zbrah and birdman71 like this. __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

12-11-2015, 05:42 AM	#3 (permalink)
POS VETT Track Member Join Date: Apr 2015 Location: Columbus OH Posts: 612 Drives: Z34\|C4LT4\|C6Z06\|V25 Rep Power: 3366	Are the studs welded or do they have a knurl under the head? Zbrah likes this.

12-11-2015, 06:14 AM	#4 (permalink)
barncobob A True Z Fanatic Join Date: Sep 2015 Location: hangtown, CA Posts: 1,164 Drives: 16 370Z auto Rep Power: 589	take it to a machine shop, they can do anything with metal Zbrah likes this.

12-11-2015, 06:19 AM	#5 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324197	They look like pressed in studs. If they are, you should be able to knock them out with a hammer. kenchan, JARblue, hjo1078 and 3 others like this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

12-11-2015, 01:46 PM	#10 (permalink)
barncobob A True Z Fanatic Join Date: Sep 2015 Location: hangtown, CA Posts: 1,164 Drives: 16 370Z auto Rep Power: 589	get a BFH.......big frig... hammer

12-11-2015, 01:53 PM	#11 (permalink)
Elmo370z A True Z Fanatic Join Date: Apr 2013 Location: st. petersburg Posts: 5,707 Drives: 09 nissan 370z Sp M6 Rep Power: 295378	pb blast over night

12-11-2015, 09:39 PM	#12 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,533 Drives: 2013 Nismo 370z Rep Power: 2684391	The stud is spot welded in. Torch it.

12-11-2015, 11:52 PM	#13 (permalink)
zmanelite Track Member Join Date: Nov 2013 Location: Anaheim Posts: 753 Drives: 370 Z Nismo Rep Power: 36	I would cut and grind down flush Use a punch to get it centered and after grab s nice sharp drill bit and go at it , use lube and keep speed slow __________________ Instagram @zmanscm

12-12-2015, 03:36 AM	#15 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	What is that pipe? Looks like a mid-pipe of some sort. Kevin at Austin Z Clinic just hammered my broken exhaust bolts out with a metal hammer (small sledge like Kenchan suggested). That's what I'd try first. Nice and cheap kenchan and Zbrah like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Too much oil...problem?	vermithrax	Nissan 370Z General Discussions	15	11-09-2012 11:07 AM
oem nav problem	im89	Audio & Video	5	10-08-2011 02:14 PM
lug nut problem..hmm	209Z	Wheels & Tires	3	02-03-2010 06:21 PM
New Roadster, Spoiler problem, dealer problem	Hello	Nissan 370Z General Discussions	26	01-11-2010 05:22 PM
does anyone else have this problem and what should I do?	JakeZ34	Nissan 370Z General Discussions	4	10-08-2009 06:41 PM