Relentless Autosports: GROUP BUY / 2 piece F&R rotors set for the Akebono brake kit

gpa7pk · 10-19-2010, 07:27 PM

My weight measurements were not totally accurate. I must learn to pee before and not during these critical measurements. The front rotors do save in excess of 10 lbs but the rear rotors save approximately 3 to 4 lbs each. If any of you are looking for more accurate numbers - buy them and measure them yourselves. BTW, they are great!!!!! Don't forget what Scott says...they do make noise, but I don't think you will notice at the track.

Endgame · 11-28-2010, 12:12 AM

is the noise due to them being full floating rotors, or do the fixed 2 piece make the same noise?

Scott @ RA · 11-29-2010, 01:58 AM

Quote:

Originally Posted by Endgame

is the noise due to them being full floating rotors, or do the fixed 2 piece make the same noise?

Yes, the only noise is from the optional full floating design. They make a little rattling noise as do all true full floating racing and performance rotors. The rattling noise really only occurs when you are off the brake and street cruising like at 45 mph or less....
The two piece fixed, solid, non-floating option of these rotors do not make that noise.

Scott @ RA · 01-12-2011, 06:07 PM

Getting lots of inquiry's and interest in these lately. Even though the group buy offer has long since been over.... these are still selling (slow and steady).

infamousstuna · 01-19-2011, 12:48 AM

Hey Scott, i can't wait to get these installed!
Btw, email me the tracking number when you get a chance please.

pty370z · 01-20-2011, 10:02 PM

Hi Scott,

I've carefully read through the entire thread and I must say I'm sold on these. However, I will purchase when I target my budget at upgrading my brakes. I'm the kind of guy that likes to do all the stuff at the same time. So, when the time comes, I'll do SS lines, pads, rotors, fluid, etc...

My car is a daily driver and I'm extremely picky with noises, no matter how little they are.. My only questions is, do the two piece fixed, solid, non-floating rotors weigh the same as the floating ones or are they heavier..??

My main interest on these are the weight savings... Thanks for your help..

Scott @ RA · 01-21-2011, 12:39 PM

Quote:

Originally Posted by infamousstuna

Hey Scott, i can't wait to get these installed!
Btw, email me the tracking number when you get a chance please.

You got it, sorry for the delay. The hardware we were waiting for should be here today (hopefully)

Scott @ RA · 01-21-2011, 12:43 PM

Quote:

Originally Posted by pty370z

Hi Scott,

I've carefully read through the entire thread and I must say I'm sold on these. However, I will purchase when I target my budget at upgrading my brakes. I'm the kind of guy that likes to do all the stuff at the same time. So, when the time comes, I'll do SS lines, pads, rotors, fluid, etc...

Thanks, and sounds good, that is the best plan, IMO

Quote:

Originally Posted by pty370z

My car is a daily driver and I'm extremely picky with noises, no matter how little they are.. My only questions is, do the two piece fixed, solid, non-floating rotors weigh the same as the floating ones or are they heavier..??

My main interest on these are the weight savings... Thanks for your help..

Yes sir, our quieter, solid/fixed mounted version of our light weight two piece rotors are every bit as light as the full floating option ones.

pty370z · 01-21-2011, 01:34 PM

Quote:

Originally Posted by Scott @ RA

Yes sir, our quieter, solid/fixed mounted version of our light weight two piece rotors are every bit as light as the full floating option ones.

I forgot to ask one more thing... Do they cost the same as the full floating option or are the solid/fixed cheaper..??

Thank you Scott!

NewYorkJon34 · 01-21-2011, 02:11 PM

^ya how much do the solid 2-piece rotors cost? Should be cheaper than the full floating rotors right?

Scott @ RA · 01-21-2011, 09:14 PM

Quote:

Originally Posted by NewYorkJon34

^ya how much do the solid 2-piece rotors cost? Should be cheaper than the full floating rotors right?

Same price.

EDIT- The rotors and machine time is the same, but the T-Lock hardware on the full floating rotors cost me about $2.25 each x 12 each rotor, so I can actually offer the fixed/ solid mounted rotors for about $20 less each rotor or $80 less per set if it helps.

infamousstuna · 01-22-2011, 10:17 AM

Quote:

Originally Posted by Scott @ RA

You got it, sorry for the delay. The hardware we were waiting for should be here today (hopefully)

Alright. Thanks Scott.

psedog · 01-25-2011, 06:27 AM

Dang Scott. Didn't know you created these two pieces. People have been claiming they would make these for years, but yeah we see how many of them delivered, lol. (I haven't been on any car forums lately

)

That's awesome that you are willing to offer a discount for the non floating even though it really isn't that much different it terms of cost to you. Not many people would be doing that.

I was going to hit you up on facebook, but decided to register here.
How much would a front kit cost? (your 2-piece rotors, oem calipers, your G35 adapter)
I'm already eyeing pads.

I did find out about this through a post by Lawrence@autostrafe on the Driver forum. It was for the bracket and it piqued my interest. Hence I searched you out and found these awesome 2-piecers.

infamousstuna · 01-25-2011, 11:28 AM

Quote:

Originally Posted by Scott @ RA

You got it, sorry for the delay. The hardware we were waiting for should be here today (hopefully)

Hey Scott, my man, do you have some good news for me?

infamousstuna · 01-26-2011, 11:51 AM

Thanks for the update Scott!
Looking forward to it.

01-20-2011, 10:02 PM	#96 (permalink)
pty370z Track Member Join Date: Apr 2009 Location: Panama City, Panama Posts: 654 Drives: over the speed limit Rep Power: 17	Hi Scott, I've carefully read through the entire thread and I must say I'm sold on these. However, I will purchase when I target my budget at upgrading my brakes. I'm the kind of guy that likes to do all the stuff at the same time. So, when the time comes, I'll do SS lines, pads, rotors, fluid, etc... My car is a daily driver and I'm extremely picky with noises, no matter how little they are.. My only questions is, do the two piece fixed, solid, non-floating rotors weigh the same as the floating ones or are they heavier..?? My main interest on these are the weight savings... Thanks for your help.. __________________ 2010 Solid Red 370Z * *Touring-Sport-6MT Black Interior Performance:** STILLEN * BERK * UR * MISHIMOTO * K&N * Z1 * ZSPEED * UPREV * DBA Interior: GT-R Red Start/Stop Button * MSA Floor Mats * PW:JDM Exterior: INGS+1 * SEIBON * FUJIMURA * PW:JDM * UAM * KICS * VOLK

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan Akebono 14" Brake Kits, Hawk Pads, Stoptech Rotors, 370Z Sport	Coz@Czp	Suspension/Brakes	68	06-01-2018 11:23 AM
Coming soon Z1 2 piece 370Z Akebono front rotors, track tested.	John@Z1	Brakes & Suspension	107	03-02-2014 08:54 PM
project mu 2 piece rotors	keng714	Brakes & Suspension	11	09-23-2011 10:00 AM
fastbrakes 2 piece slotted rotors	Valentino	Brakes & Suspension	40	04-20-2010 03:24 AM
Relentless Autosports 2 Peice Brakes	Equinox	Brakes & Suspension	11	04-12-2010 04:03 AM

10-19-2010, 07:27 PM	#91 (permalink)
gpa7pk Base Member Join Date: Apr 2009 Location: Texas Posts: 135 Drives: 1959 Triumph TR3A Rep Power: 16	My weight measurements were not totally accurate. I must learn to pee before and not during these critical measurements. The front rotors do save in excess of 10 lbs but the rear rotors save approximately 3 to 4 lbs each. If any of you are looking for more accurate numbers - buy them and measure them yourselves. BTW, they are great!!!!! Don't forget what Scott says...they do make noise, but I don't think you will notice at the track.

11-28-2010, 12:12 AM	#92 (permalink)
Endgame A True Z Fanatic Join Date: Nov 2008 Location: Phoenix Posts: 1,613 Drives: Nothing Now! Rep Power: 223	is the noise due to them being full floating rotors, or do the fixed 2 piece make the same noise?

01-12-2011, 06:07 PM	#94 (permalink)
Scott @ RA Enthusiast Member Join Date: Feb 2010 Location: So Cal Posts: 410 Drives: Ridiculously Fast Rep Power: 15	Getting lots of inquiry's and interest in these lately. Even though the group buy offer has long since been over.... these are still selling (slow and steady).

01-19-2011, 12:48 AM	#95 (permalink)
infamousstuna Base Member Join Date: Jan 2011 Location: south florida Posts: 7 Drives: 08 g37 Rep Power: 14	Hey Scott, i can't wait to get these installed! Btw, email me the tracking number when you get a chance please.

01-21-2011, 02:11 PM	#100 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1064	^ya how much do the solid 2-piece rotors cost? Should be cheaper than the full floating rotors right?

01-25-2011, 06:27 AM	#103 (permalink)
psedog Base Member Join Date: Jan 2011 Location: Japan Posts: 1 Drives: 06 Infiniti G35 4dr Rep Power: 14	Dang Scott. Didn't know you created these two pieces. People have been claiming they would make these for years, but yeah we see how many of them delivered, lol. (I haven't been on any car forums lately ) That's awesome that you are willing to offer a discount for the non floating even though it really isn't that much different it terms of cost to you. Not many people would be doing that. I was going to hit you up on facebook, but decided to register here. How much would a front kit cost? (your 2-piece rotors, oem calipers, your G35 adapter) I'm already eyeing pads. I did find out about this through a post by Lawrence@autostrafe on the Driver forum. It was for the bracket and it piqued my interest. Hence I searched you out and found these awesome 2-piecers.

01-26-2011, 11:51 AM	#105 (permalink)
infamousstuna Base Member Join Date: Jan 2011 Location: south florida Posts: 7 Drives: 08 g37 Rep Power: 14	Thanks for the update Scott! Looking forward to it.