Berk Cat-Back Exhaust GB #2!!!

370zdub · 03-06-2010, 10:34 AM

I can get you guys a pic of the box! Thats as far as I have made it, stupid school and work. I will try to get it out of the box and get some pics for you guys after work today!
Thanks nogood! lol dreamer it was only 6:30 here when you posted that!

MightyBobo · 03-08-2010, 12:53 AM

The weather is nice here, and its looking nice for a while. Im going to try to accelerate my plans to get this installed quickly. However, need to hook up an appointment at Altered Atmosphere for a baseline dyno before anything moves forward. This is also dependent on if Berk shipped my Cats with my exhaust...have yet to get confirmation on that...

370Zsteve · 03-08-2010, 10:28 AM

Quote:

Originally Posted by MightyBobo

The weather is nice here, and its looking nice for a while. Im going to try to accelerate my plans to get this installed quickly. However, need to hook up an appointment at Altered Atmosphere for a baseline dyno before anything moves forward. This is also dependent on if Berk shipped my Cats with my exhaust...have yet to get confirmation on that...

Same here, it all depends on when UPS gets the shipment to me from the west coast. Sure would be nice if I could install this when the temps are around 60 instead of 30.

I am going to schedule up a baseline dyno after I talk to a few folks to see who is the best shop in the area. Then another dyno pull so we'll have some data with stock cats. Vids will follow.

azn370z · 03-08-2010, 12:54 PM

How many exhausts are shipping out today? 6 more to go.

MightyBobo · 03-08-2010, 02:14 PM

Quote:

Originally Posted by 370Zsteve

Same here, it all depends on when UPS gets the shipment to me from the west coast. Sure would be nice if I could install this when the temps are around 60 instead of 30.

I am going to schedule up a baseline dyno after I talk to a few folks to see who is the best shop in the area. Then another dyno pull so we'll have some data with stock cats. Vids will follow.

I spoke too soon I guess. Berk needed to make me a fresh pair of HFC's...they arent shipping out til this week sometime hopefully

I guess I need to get my baseline dyno done yet anyway.

The Weapon · 03-08-2010, 03:12 PM

I just got my exhaust. Now the fun starts.

Everythign was packaged very nice my only complaint is my bolts were loose in the box mixed in with the paper wrap. I hope I found them all.

370Zsteve · 03-08-2010, 06:49 PM

Quote:

Originally Posted by The Weapon

I just got my exhaust. Now the fun starts.

Everythign was packaged very nice my only complaint is my bolts were loose in the box mixed in with the paper wrap. I hope I found them all.

THat last pic just got me

g96818 · 03-08-2010, 05:04 PM

Quote:

Scheduled Delivery Date: 03/08/2010 (Updated)
03/09/2010 (Original)

JB1 · 03-08-2010, 09:35 PM

Scheduled delivery: march 12! I won't be doing a dyno but there might be a comparison video down the line: Stillen CBE + HFC's vs. Berk CBE + HFC's, side by side drive by or something like that.

BOLIO 671 · 03-08-2010, 10:23 PM

Did anyone from GB #2 receive their exhaust yet?

The Weapon · 03-08-2010, 10:26 PM

I was on the GB#2 and received today and installed already. Sounds great. Does anyone have any pointers on lining up the tips better?

Mine look a little off. The Passenger side seems to look like it's a little lower.

azn370z · 03-08-2010, 10:28 PM

I believe you can add washers to make it even.

schrute · 03-08-2010, 11:23 PM

Quote:

Originally Posted by azn370z

I believe you can add washers to make it even.

Washers on the inner hanger bolts on the high side should line that right up.

radio5boro · 03-09-2010, 06:08 AM

I get mine tomorrow, but I'm leaving for Tokyo tomorrow morning. So I won't get to see my exhaust till Sunday

JB1 · 03-08-2010, 11:30 PM

Quote:

Originally Posted by The Weapon

I was on the GB#2 and received today and installed already. Sounds great. Does anyone have any pointers on lining up the tips better?

Mine look a little off. The Passenger side seems to look like it's a little lower.

How is the sound compared to just the HFC's? Just so I know what to expect

03-06-2010, 10:34 AM	#1 (permalink)
370zdub Track Member Join Date: Jun 2009 Location: UT Posts: 628 Drives: 09 370z 6mt,10 Ford Rep Power: 18	I can get you guys a pic of the box! Thats as far as I have made it, stupid school and work. I will try to get it out of the box and get some pics for you guys after work today! Thanks nogood! lol dreamer it was only 6:30 here when you posted that! __________________ 2010 Ford 6.4L Power Stroke Diesel: 588whp/1082wtrq 2007 Dodge 6.7L Cummins Diesel: 788whp/1405wtrq, runs 12's @ 7400lbs, Still miss my 370z!

03-08-2010, 12:53 AM	#2 (permalink)
MightyBobo A True Z Fanatic Join Date: Feb 2009 Location: Las Vegas, NV Posts: 8,465 Drives: No cars; only bikes Rep Power: 53	The weather is nice here, and its looking nice for a while. Im going to try to accelerate my plans to get this installed quickly. However, need to hook up an appointment at Altered Atmosphere for a baseline dyno before anything moves forward. This is also dependent on if Berk shipped my Cats with my exhaust...have yet to get confirmation on that... __________________ I don't own a car anymore.

03-08-2010, 12:54 PM	#4 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	How many exhausts are shipping out today? 6 more to go. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

03-08-2010, 03:12 PM	#6 (permalink)
The Weapon Enthusiast Member Join Date: Nov 2008 Location: Tucson, AZ Posts: 286 Drives: 370Z Tour/Sport Blk Rep Power: 3372	I just got my exhaust. Now the fun starts. Everythign was packaged very nice my only complaint is my bolts were loose in the box mixed in with the paper wrap. I hope I found them all. __________________ Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P

03-08-2010, 09:35 PM	#9 (permalink)
JB1 Track Member Join Date: Mar 2009 Location: Chicagoland Posts: 748 Drives: 09 Nissan 370Z sold Rep Power: 18	Scheduled delivery: march 12! I won't be doing a dyno but there might be a comparison video down the line: Stillen CBE + HFC's vs. Berk CBE + HFC's, side by side drive by or something like that. __________________ Black Fangs // Black rear Valance // Berk CBE // COBB post MAF tubes // K&N drop in filters // Setrab Oil Cooler // Stillen Sway bars // Z1 SS brake lines // Stillen brake cooling kit // Harness bar //

03-08-2010, 10:23 PM	#10 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3400	Did anyone from GB #2 receive their exhaust yet?

03-08-2010, 10:26 PM	#11 (permalink)
The Weapon Enthusiast Member Join Date: Nov 2008 Location: Tucson, AZ Posts: 286 Drives: 370Z Tour/Sport Blk Rep Power: 3372	I was on the GB#2 and received today and installed already. Sounds great. Does anyone have any pointers on lining up the tips better? Mine look a little off. The Passenger side seems to look like it's a little lower. __________________ Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P

03-08-2010, 10:28 PM	#12 (permalink)
azn370z A True Z Fanatic Join Date: Nov 2008 Location: Seattle Posts: 1,722 Drives: z34 - R1 Rep Power: 490	I believe you can add washers to make it even. __________________ 2010 k23 H&R sport springs / Spc rear camber arms / SSR SP1 / Berk cbe / Varis cf lip / Nismo S-Tune side skirts

03-09-2010, 06:08 AM	#14 (permalink)
radio5boro Base Member Join Date: Sep 2009 Location: Queens, NY Posts: 158 Drives: 09 MBlue 370z 6MT Rep Power: 16	I get mine tomorrow, but I'm leaving for Tokyo tomorrow morning. So I won't get to see my exhaust till Sunday

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DDMotorsports: Berk Technology Cat-Back Exhaust	M.Bonanni	Exhaust/Intake	47	12-14-2009 12:20 PM
Berk Technology Cat-Back Coming Soon!	M.Bonanni	Intake/Exhaust	468	08-14-2009 09:36 PM
Stillen Gen3 Intake, Berk Hi-flow cat, and Stillen cat-back exhaust	axio	Intake/Exhaust	82	07-31-2009 12:41 PM