My 5k budget mid mount turbo build

LIL_G13 · 09-09-2014, 01:11 AM

Looking very nice! Looking forward to seeing what kind of numbers your car is making.

batboyvaj · 09-09-2014, 07:23 AM

Once you get the bender and streamline how you produce this kit....get this out for people to buy! $5k single turbo kit for the z!

BBRSpeedWorks · 09-17-2014, 11:51 AM

update from last week. sorry it took me so long to get back on...here is a video of first start up and some pics under the hood..will upload some pulls when i get them off my gopro...also this thing holds 10 qtr of oil and temps in georgia dont get over 180 so far. ill upload some more tonight...

Mitco39 · 09-17-2014, 12:00 PM

Congrats!

BBRSpeedWorks · 09-17-2014, 12:07 PM

Thanks...it's loud but spool is great...bad thing is I think my oil restricter is to big I'm getting blow by alil bit...going to call persicion today and talk tthem..

Mitco39 · 09-17-2014, 12:55 PM

Did you prime the scavenge pump? It should be able to suck much more than that small oil line will provide the turbo.

BBRSpeedWorks · 09-17-2014, 01:05 PM

I just got off the phone with precision and they said when I started it be4 I had the oil catch I most likely blow oil past the seals and that it would take a couple hours of driving to get it cleaned out...idk...I'll check it tonight...they also told me not to run a restricter but I think I'm good..

Mitco39 · 09-17-2014, 03:05 PM

I will tell you that if you ran it without the catch installed it will take quite a bit of time to get it all out of there. I ran mine forgetting to reinstall the fuse once and you could not see across 4 lanes of traffic behind me. There was raw oil coming out the tailpipe. lol.

BBRSpeedWorks · 09-17-2014, 03:14 PM

Hahaha ya that's what I think it is

BBRSpeedWorks · 09-17-2014, 04:13 PM

How long did it take to get it cleared out?

BBRSpeedWorks · 09-21-2014, 07:44 PM

sorry it took so long gents...but here is a couple pulls...7psi and 10psi.. this is just turbo no exhaust with open dumps....

here 7psi

jpritche · 09-21-2014, 07:54 PM

Video is set to private.

Edit: sounds great!

BBRSpeedWorks · 09-21-2014, 08:00 PM

it should be good now

BBRSpeedWorks · 09-21-2014, 08:03 PM

here is another of 10psi with a bad camera guy

Asheth · 09-21-2014, 08:04 PM

Repped

09-09-2014, 07:23 AM	#92 (permalink)
batboyvaj Base Member Join Date: Jun 2011 Location: mn Posts: 111 Drives: 2011 370z Rep Power: 15	Once you get the bender and streamline how you produce this kit....get this out for people to buy! $5k single turbo kit for the z! BBRSpeedWorks likes this.

09-17-2014, 11:51 AM	#93 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 13	update from last week. sorry it took me so long to get back on...here is a video of first start up and some pics under the hood..will upload some pulls when i get them off my gopro...also this thing holds 10 qtr of oil and temps in georgia dont get over 180 so far. ill upload some more tonight... fuct, ANMVQ and TedB370z like this.

09-17-2014, 12:00 PM	#94 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 133	Congrats! BBRSpeedWorks likes this. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

09-17-2014, 12:55 PM	#96 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 133	Did you prime the scavenge pump? It should be able to suck much more than that small oil line will provide the turbo. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

09-17-2014, 03:05 PM	#98 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 133	I will tell you that if you ran it without the catch installed it will take quite a bit of time to get it all out of there. I ran mine forgetting to reinstall the fuse once and you could not see across 4 lanes of traffic behind me. There was raw oil coming out the tailpipe. lol. __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

09-09-2014, 01:11 AM	#91 (permalink)
LIL_G13 Base Member Join Date: Oct 2012 Location: Paso Robles Ca Posts: 223 Drives: 2010 Nissan 370z TT Rep Power: 14	Looking very nice! Looking forward to seeing what kind of numbers your car is making.

09-17-2014, 12:07 PM	#95 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 13	Thanks...it's loud but spool is great...bad thing is I think my oil restricter is to big I'm getting blow by alil bit...going to call persicion today and talk tthem..

09-17-2014, 01:05 PM	#97 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 13	I just got off the phone with precision and they said when I started it be4 I had the oil catch I most likely blow oil past the seals and that it would take a couple hours of driving to get it cleaned out...idk...I'll check it tonight...they also told me not to run a restricter but I think I'm good..

09-17-2014, 03:14 PM	#99 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 13	Hahaha ya that's what I think it is

09-17-2014, 04:13 PM	#100 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 13	How long did it take to get it cleared out?

09-21-2014, 07:44 PM	#101 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 13	sorry it took so long gents...but here is a couple pulls...7psi and 10psi.. this is just turbo no exhaust with open dumps.... here 7psi anthonyy, Mbreese, megalapagas and 1 others like this.

09-21-2014, 07:54 PM	#102 (permalink)
jpritche A True Z Fanatic Join Date: Oct 2010 Location: Cartersville, Ga Age: 34 Posts: 2,570 Drives: '15 RR, '14 IS250 Rep Power: 32	Video is set to private. Edit: sounds great! Last edited by jpritche; 09-21-2014 at 08:00 PM.

09-21-2014, 08:00 PM	#103 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 13	it should be good now

09-21-2014, 08:03 PM	#104 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 13	here is another of 10psi with a bad camera guy anthonyy and megalapagas like this.

09-21-2014, 08:04 PM	#105 (permalink)
Asheth Track Member Join Date: Dec 2008 Location: Glen Burnie, Maryland Posts: 917 Drives: 09 Blk 6mt Rep Power: 19	Repped BBRSpeedWorks likes this. __________________ 180 customs Headlights - Yantech Backup Camera - Projekt 1 - Stillen Gen 3- EVO-R V2 Foglight, EVO-R CF Diffuser, Carbon Fiber Element Steering wheel - Fast Intentions TDX/RHFC's - RJM A.F.P. - Z1 Oil Cooler - 2015 Nismo Conversion.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dan's VSR top-mount turbo 370 v3.0	FireDan50	Member's 370Z Gallery	163	05-19-2020 02:49 PM
1ST 7AT TOP MOUNT TURBO BUILD.. By S&R Performance	valpozguy	Forced Induction	83	04-27-2014 10:02 PM
Sts rear mount turbo	Ni55anPat	Wanted	3	12-22-2012 06:15 PM
Your dream system on a $1100 budget – Build it!	SP33DKILLS	Audio & Video	14	04-17-2012 02:12 AM
First STS rear mount turbo 370Z???	atx370z	Nissan 370Z General Discussions	24	10-14-2010 02:53 PM