So just ordered my Stillen SC

JWillis72 · 01-10-2015, 04:24 PM

I'm interested to see how that works.

Sent from my iPhone using Tapatalk

JWillis72 · 01-10-2015, 06:13 PM

Are you running the 2" or 3.5" thick frozen boost?

Z&I · 01-11-2015, 02:26 PM

Quote:

Originally Posted by JWillis72

Are you running the 2" or 3.5" thick frozen boost?

24x12x1
It was measured out by the shop to fit in the confined space in front of and on the left of the radiator...(I wasn't there when they determined it)

There is a brace that limited the depth of the exchanger.

Here is the link to the one that I now have:
Air to Water Radiator

I don't know if I can go to a shorter/deeper 12x12x2 - same capacity/area as the 24x12x1
Here is the link to that one:
http://www.frozenboost.com/water-to-...or-p-1062.html

It (and the motor) are still out of the car ... so it's not cast in stone as to what the best solution is.

I'm open to any suggestions

Can you send the link to the 3.5"

JWillis72 · 01-11-2015, 03:28 PM

Air to Water Heat Exchanger

My car is going in the shop tomorrow to start reworking the cooling, we are trying to use this one if we have room. It looks like we will get a little more room with the Stillen bumpers larger opening. We are moving the oil cooler to the wheel well like GTM did with a fan on it and if we have room by removing the washer fluid tank we will do both fenders to get as much as we can away from the radiator. With the frozen boost the question is do we have 26" between the brake duct fangs.

JWillis72 · 01-11-2015, 04:49 PM

We will figure out a plan this week and order parts. The car will probably be there a couple weeks but I will let you know how it works out. I have a Aquamist meth injection kit on the car but it just not reliable enough to trust so I want as big of a cooler as we can fit.

Sent from my iPhone using Tapatalk

Z&I · 01-12-2015, 07:11 AM

Quote:

Originally Posted by JWillis72

We will figure out a plan this week and order parts. The car will probably be there a couple weeks but I will let you know how it works out. I have a Aquamist meth injection kit on the car but it just not reliable enough to trust so I want as big of a cooler as we can fit.

Sent from my iPhone using Tapatalk

Thanks for the info

I have the stock bumper and have the line locks installed in the wheel wells.
I'm going to drop by the shop tonight and talk over some things with them and look at what we can do with the IC and Heat Exchanger.
Hopefully we can find some more room in there.

I have the Aquamist ready to be installed ... bought it direct from UK...and it took only a week to get here.
Richard @ Aquamist has been helpful in the support department...really quick on the draw when it comes to emails.
He's only support for Aquamist purchased thru UK though.

JWillis72 · 01-12-2015, 07:37 AM

My control unit is on the way back to him, it's been in the car close to a year and has missed more track days than it's made. I didn't use it every day and more times than not something didn't work when I turned it on, I have lost faith in the system and no longer trust it. I'm just afraid it's going to stop working on the track, my meth map is to lean without it and it could cost me a engine.

JWillis72 · 01-12-2015, 01:39 PM

I spent some time at the shop today and with the Stillen bumper we can get the 3.5" cooler in so that's the plan for now. The 7AT trans cooler is going to the drivers wheel well and the oil cooler is going to the passenger wheel well. Haven't figured out the power steering cooler but it's not that big so it shouldn't be a problem.

Sent from my iPhone using Tapatalk

Team_STILLEN · 01-12-2015, 01:52 PM

jwick · 01-12-2015, 02:10 PM

That bumper is awesome. Wonder if it would work with a TT setup?

JWillis72 · 01-12-2015, 02:13 PM

If the stock one does I don't see why not, it gives you more room.

Sent from my iPhone using Tapatalk

jwick · 01-12-2015, 02:14 PM

Quote:

Originally Posted by JWillis72

If the stock one does I don't see why not, it gives you more room.

Sent from my iPhone using Tapatalk

I was more looking at the side vents. There's a lot of filter shoved in there on a TT setup.

JWillis72 · 01-12-2015, 02:17 PM

To use the passenger side for a oil cooler you have to get rid of the washer fluid tank. I didn't care because mine was being used for the meth system I'm removing. Stillen sends you a smaller one but for a large oil cooler I don't think it will fit.

Sent from my iPhone using Tapatalk

JWillis72 · 01-12-2015, 02:22 PM

Oh if the filters are there that could be a problem.

Sent from my iPhone using Tapatalk

theDreamer · 01-12-2015, 02:31 PM

Quote:

Originally Posted by jwick

I was more looking at the side vents. There's a lot of filter shoved in there on a TT setup.

I believe a couple guys with TT kits have the Stillen front bumper.
I think Chris N in Houston does actually, but need to check again.

01-11-2015, 03:28 PM	#349 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	Air to Water Heat Exchanger My car is going in the shop tomorrow to start reworking the cooling, we are trying to use this one if we have room. It looks like we will get a little more room with the Stillen bumpers larger opening. We are moving the oil cooler to the wheel well like GTM did with a fan on it and if we have room by removing the washer fluid tank we will do both fenders to get as much as we can away from the radiator. With the frozen boost the question is do we have 26" between the brake duct fangs. Team_STILLEN likes this.

01-11-2015, 04:49 PM	#350 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	We will figure out a plan this week and order parts. The car will probably be there a couple weeks but I will let you know how it works out. I have a Aquamist meth injection kit on the car but it just not reliable enough to trust so I want as big of a cooler as we can fit. Sent from my iPhone using Tapatalk Team_STILLEN likes this.

01-12-2015, 01:39 PM	#353 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	I spent some time at the shop today and with the Stillen bumper we can get the 3.5" cooler in so that's the plan for now. The 7AT trans cooler is going to the drivers wheel well and the oil cooler is going to the passenger wheel well. Haven't figured out the power steering cooler but it's not that big so it shouldn't be a problem. Sent from my iPhone using Tapatalk jwick, swiss370Z, Z&I and 1 others like this.

01-12-2015, 01:52 PM	#354 (permalink)
Team_STILLEN Base Member Join Date: Dec 2013 Location: Costa Mesa, California Posts: 216 Drives: 2009 370Z Rep Power: 20	JWillis72 likes this. __________________ Financing with Affirm now available!!! *STILLEN* \| Robin \| Performance Specialist \| rmoses@stillen.com\| 800.576.2131 x133 \|

01-12-2015, 02:10 PM	#355 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	That bumper is awesome. Wonder if it would work with a TT setup? Team_STILLEN likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

01-10-2015, 04:24 PM	#346 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	I'm interested to see how that works. Sent from my iPhone using Tapatalk

01-10-2015, 06:13 PM	#347 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	Are you running the 2" or 3.5" thick frozen boost?

01-12-2015, 07:37 AM	#352 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	My control unit is on the way back to him, it's been in the car close to a year and has missed more track days than it's made. I didn't use it every day and more times than not something didn't work when I turned it on, I have lost faith in the system and no longer trust it. I'm just afraid it's going to stop working on the track, my meth map is to lean without it and it could cost me a engine.

01-12-2015, 02:13 PM	#356 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	If the stock one does I don't see why not, it gives you more room. Sent from my iPhone using Tapatalk Team_STILLEN likes this.

01-12-2015, 02:17 PM	#358 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	To use the passenger side for a oil cooler you have to get rid of the washer fluid tank. I didn't care because mine was being used for the meth system I'm removing. Stillen sends you a smaller one but for a large oil cooler I don't think it will fit. Sent from my iPhone using Tapatalk

01-12-2015, 02:22 PM	#359 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	Oh if the filters are there that could be a problem. Sent from my iPhone using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Just ordered my Stillen CBE	carmelvalleyZ	Intake/Exhaust	12	03-23-2014 02:20 PM
Just ordered a 1LE	280z/300zx	Other Vehicles	4	08-18-2013 01:05 PM
Just ordered Stillen gen 3 cai	henryy370z	Intake/Exhaust	3	08-02-2012 09:03 PM
just ordered!	nj2alaska	New 370Z Owner	9	07-21-2011 03:18 AM
Stillen CBE and Berk HFC ordered	Nitex	Intake/Exhaust	19	02-07-2010 07:45 AM