Rear Camber / Alignment Settings with Turbos

Nixlimited · 06-05-2014, 12:25 PM

Paging DJTodd! Resident TT track junkie.

Rusty · 06-05-2014, 07:05 PM

If I was you, and doing a couple of trackdays (road course) a year. I would set the camber to -1.5 ~ -1.7. Drag would be 0 or close to it. I'm running -1.75 and zero toe in the rear.

DEpointfive0 · 06-05-2014, 07:14 PM

Quote:

Originally Posted by Nixlimited

I think my camber arms give me more adjustment than the lockout bolts. Now, as for toe bolts, I may need those.

NEED. The camber arms don't provide much USEFUL adjustment without the bolts (just got my car aligned and just SPL arms was a waste because they couldn't take more camber out without messing up toe big time)

Quote:

Originally Posted by Rusty

If I was you, and doing a couple of trackdays (road course) a year. I would set the camber to -1.5 ~ -1.7. Drag would be 0 or close to it. I'm running -1.75 and zero toe in the rear.

Yeahhhhhhh... This is better, I didn't read or remember reading anything for track usage (I assumed you meant for drag)
Either way, the 370Z is not a rear camber friendly car, especially with that amount of power. (I say that because it squats like a mofo and the multilink suspension throws everything out of whack)

zefaulter · 06-08-2014, 10:17 PM

Quote:

Originally Posted by DEpointfive0

NEED. The camber arms don't provide much USEFUL adjustment without the bolts (just got my car aligned and just SPL arms was a waste because they couldn't take more camber out without messing up toe big time)

I'm running -3 camber in the rear with 0 toe. You're saying when I put my camber arms to reduce camber I'll mess up toe? I don't have lock out bolt for toe or camber

06-05-2014, 12:25 PM	#1 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 27	Paging DJTodd! Resident TT track junkie. GaleForce likes this. __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

06-05-2014, 07:05 PM	#2 (permalink)
Rusty A True Z Fanatic Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 70 Posts: 35,580 Drives: 2011 Nismo GM 6M Rep Power: 2684440	If I was you, and doing a couple of trackdays (road course) a year. I would set the camber to -1.5 ~ -1.7. Drag would be 0 or close to it. I'm running -1.75 and zero toe in the rear. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Free Alignment with Purchase and Install of SPL Front and Rear Camber arms!!!	corner3garage	Southern California Region	183	02-18-2015 11:56 AM
Installed SPC rear camber kit after installing swift and got an alignment!	khsysh	Brakes & Suspension	50	03-28-2014 10:19 AM
SPL Camber arms & New alignment specs Rear is super loose	Rangerz	Brakes & Suspension	7	03-04-2014 01:52 AM
Recommended alignment settings (camber)	bldg636	Brakes & Suspension	2	06-08-2013 10:18 PM