Audio Dynamix 370z Nitrous Install

gbrettin · 02-08-2016, 09:58 PM

Quote:

Originally Posted by Shin Beats

My I ask why you had to shift into 5th? Sorry for bringing back a pretty dead thread, but from my experience the 4th gear on the 7AT with stock Final drive/wheels ends in the mid 120 mphs.

Are you also spraying in between shifts? And you're spraying off the line on a stock stall 7AT?

4th was running pretty damn high in the revs near the end of the track so I shift to 5th.

4th to 5th with any type of forced induction for the 7AT is not good which is why I'm getting a Level 10 transmission and I bought an AAG billet flex plate.

The engine kills the full throttle signal for a moment while it shifts. The Zex unit only operates when it has full throttle signal.

gbrettin · 02-08-2016, 09:59 PM

Quote:

Originally Posted by joekyle

can you post some pictures of the fuel tap, i am trying to install this same kit and cannot find the point in the fuel line where i need to tap in the provided fuel adaptor.

My car is in storage right now but I'll see what I can do.

tommyguns · 02-08-2016, 10:29 PM

Quote:

Originally Posted by joekyle

can you post some pictures of the fuel tap, i am trying to install this same kit and cannot find the point in the fuel line where i need to tap in the provided fuel adaptor.

Use one of these;
CJM Fuel Tap NPT, Nissan 2-Bolt | CJ Motorsports

PongSanity · 02-15-2016, 06:05 AM

CJM fuel tap is a good purchase. It costs $28 until supplies end. The alternative would be the Z1 version for $58.

https://www.z1motorsports.com/z1-pro...rt-p-9160.html

Sent from my iPhone using Tapatalk

gbrettin · 04-19-2016, 02:37 PM

I got around to changing the plugs on my car when I installed my Z1 CAI and EPS Big Bore TB's. I took a picture of the plugs when they were out and they look pretty good for having 72k mi and 12 bottles of nitrous.

One of the plugs looks wet because I had to use deep creep to loosen the plug from the head. The factory forgot to use anti-seize.

BankaiWar · 02-04-2017, 05:45 PM

Ok how do you nitrous with dual intake plenums? I haven't really found anything that explains it.

gbrettin · 02-06-2017, 05:00 AM

Quote:

Originally Posted by BankaiWar

Ok how do you nitrous with dual intake plenums? I haven't really found anything that explains it.

T the gas line and nitrous line. Go to the first page and look at the first two pictures.

Sent from my SM-G930P using Tapatalk

krazynismo · 03-21-2017, 08:18 PM

This thread is awesome!!

Kris9884 · 03-22-2017, 10:28 AM

Had a chance to get back to the track with the CAI and throttle bodies?

gbrettin · 03-22-2017, 09:37 PM

Quote:

Originally Posted by Kris9884

Had a chance to get back to the track with the CAI and throttle bodies?

Nope. But I will this year. I'm currently working on building a twin turbo kit for the 370z platform. The plan is to run a small shot of nitrous with the turbos.

Sent from my SM-G930P using Tapatalk

mikey1600 · 03-23-2017, 09:58 AM

very interesting, I'm waiting on my A2A kit to come for my stillen supercharger, might take a look at a kit and install before I get the car dyno'd again

04-19-2016, 02:37 PM	#35 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,237 Drives: Tricycle Rep Power: 542172	I got around to changing the plugs on my car when I installed my Z1 CAI and EPS Big Bore TB's. I took a picture of the plugs when they were out and they look pretty good for having 72k mi and 12 bottles of nitrous. One of the plugs looks wet because I had to use deep creep to loosen the plug from the head. The factory forgot to use anti-seize. madwi and bacalhau1669 like this.

03-21-2017, 08:18 PM	#38 (permalink)
krazynismo Base Member Join Date: Aug 2014 Location: Sandy, UT Age: 35 Posts: 42 Drives: 370Z Nismo, PW, 6M Rep Power: 10	This thread is awesome!! gbrettin likes this. __________________ '14 PW Nismo Z1 CAI, Z1 HFC, Z1 Ported Upper and Lower Intake Manifold DC Sports Stainless Headers, JWT C1 Cams, UpRev Tuned

03-22-2017, 10:28 AM	#39 (permalink)
Kris9884 Base Member Join Date: Mar 2016 Location: MO Posts: 72 Drives: 2008 G37s Rep Power: 9	Had a chance to get back to the track with the CAI and throttle bodies? __________________ My slow build thread on MyG37 - http://www.myg37.com/forums/build-th...upe-build.html

03-23-2017, 09:58 AM	#41 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 15	very interesting, I'm waiting on my A2A kit to come for my stillen supercharger, might take a look at a kit and install before I get the car dyno'd again gbrettin likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z Audio Install	2x4	Audio & Video	13	09-05-2012 09:44 AM
NismoGT's Audio Install - iPad & Sundown Audio :)	NismoGT	Audio & Video	2	02-20-2012 04:06 AM
Nitrous Install	ocean.mirage	Engine & Drivetrain	21	02-15-2012 10:01 AM
Audio install on my Z!	takimbe	Audio & Video	22	03-16-2011 04:47 PM
2009 automatic white 370z $5k high end audio/nav install (Atlanta, GA)	srr2449	370Z For Sale	0	07-10-2010 02:40 PM

02-15-2016, 06:05 AM	#34 (permalink)
PongSanity Enthusiast Member Join Date: Jul 2014 Location: Virgin Islands Posts: 261 Drives: '09 G37s KH3 6MT Rep Power: 10	CJM fuel tap is a good purchase. It costs $28 until supplies end. The alternative would be the Z1 version for $58. https://www.z1motorsports.com/z1-pro...rt-p-9160.html Sent from my iPhone using Tapatalk

02-04-2017, 05:45 PM	#36 (permalink)
BankaiWar Base Member Join Date: Nov 2016 Location: Rogersville TN Posts: 3 Drives: 10 nissan 370z cg m6 Rep Power: 8	Ok how do you nitrous with dual intake plenums? I haven't really found anything that explains it.