Boosted Performance V 2.0

Originally Posted by Boosted Performance

That is a first. I had an issue with some other intercoolers because the mounting brackets were only 1" vs. 2.5" on these intercoolers. That was something different.

This is very different. The way your intercooler sits in the video is in the correct position. The middle of the intercooler is lined up with the centre rad support. The easiest way to get around this is to drill four new holes in the brackets.

The other option is for me to send you a new set of brackets, but I would need you to measure the hole offset.

Also, I would not bother cutting those mounting braces back. It won't make any difference.


I am always available on email as well for any issues you guys may come across during the install process. I reply rather quickly to you guys.