Time for some boost! VSR Motorsports Single Turbo Kit

Boosted Performance

Inside diameter of a 3" piece of tubing is 2 7/8". Standard thickness is .065" (1/16") on exhaust tubing.

The compressor is rated to flow 75lbs/min, and the fact that it is a BB turbo does not change that spec. Remember, the compressor can flow that much, but a small turbine can't. So when looking at a turbo and the HP rating, always assume that the HP rating is for the largest turbine available for that particular turbo.

Also, comparing a 2JZ engine to the VHR engine should not be done. They are very different. The VHR heads will flow 4 times more air...again, flow will reduce pressure and increase efficiency.

I have customers using the 6266 turbo on the VQ35, and making mid 600's on pump gas at 18psi of boost, not E85. The big difference is flow, because they all have the large T4 turbine housing.

Pressure and flow are two very different things, and if you can run 17psi of boost on the stock MAF's, then you have no flow (since this is what the MAF sensors measure). If you don't have flow, something is choking the system.

__________________
750WHP starting @ $7,500 to the door
FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html
FB: https://www.facebook.com/Boosted-Per...6303179791462/
IG @boostedperformanceyeg