Time for some boost! VSR Motorsports Single Turbo Kit

Rid3_FaM0uS · 06-06-2014, 07:43 PM

Does your turbo have a feed restrictor? A lot of turbos will get flooded per say with too much oil and it will leak out past the seal causing it to burn oil also if you have bad crank case ventilation the pressure will force oil from the turbo out the seal and cause it to burn oil that way as well

COSMO · 06-07-2014, 07:57 AM

I've noticed some of the turbo kit for our cars just have crank case vents instead of rerouting them through the intake.

MidnightBlueZ · 06-07-2014, 10:44 AM

Quote:

Originally Posted by Rid3_FaM0uS

Does your turbo have a feed restrictor? A lot of turbos will get flooded per say with too much oil and it will leak out past the seal causing it to burn oil also if you have bad crank case ventilation the pressure will force oil from the turbo out the seal and cause it to burn oil that way as well

You know I'm not sure, I know the line that's on there now is suppose to restrict flow more than the one that was on there before but I guess the seal could be compromised. Bobby seems pretty certain it's coming from the turbo. The drain line doesn't look like it would restrict the flow out, no weird bends. Yeah I'll have to bring that up to him too, didn't think about that.

Quote:

Originally Posted by COSMO

I've noticed some of the turbo kit for our cars just have crank case vents instead of rerouting them through the intake.

Interesting, yeah I gotta look into this.

In other news the guys at UpRev and Bobby got me running again last night! I was pretty down earlier in the day but they pulled through and got my maps patched for the new license since Nissan wiped mine clean with an update. Wasted $200+ for a update and tow for no reason. Made my problem worse instead of fixing it. I just wanted the VVELs checked and fixed oh well. She lives again to boost another day. I was worried my car would be down until next week but the guys stepped up and got me what was needed right up until closing.

Austonian · 06-07-2014, 10:53 AM

Thats awesome, so just to clarify the original uprev tune was included with the turbo install and the dealer wiped the ecu clean when you took it in right?

MidnightBlueZ · 06-07-2014, 11:31 AM

Quote:

Originally Posted by Austonian

Thats awesome, so just to clarify the original uprev tune was included with the turbo install and the dealer wiped the ecu clean when you took it in right?

Yes, my tune was done at VSR Motorsports which is included with the turbo install. The update to my ECM wiped it out along with the license. So I couldn't load my tune with the license being gone and part number changed on my ECM.

ANMVQ · 06-09-2014, 08:44 AM

Yea those times were painful, On top of lose a lot of $$$$ 10k, ( Dealer screwed me) LONG story, Its on here :/
Did you get the "new" Map ID from him yet, I finally got my cable late on Friday.

Rid3_FaM0uS · 06-09-2014, 09:22 AM

[QUOTE=MidnightBlueZ;2850245]You know I'm not sure, I know the line that's on there now is suppose to restrict flow more than the one that was on there before but I guess the seal could be compromised. Bobby seems pretty certain it's coming from the turbo. The drain line doesn't look like it would restrict the flow out, no weird bends. Yeah I'll have to bring that up to him too, didn't think about that.

Interesting, yeah I gotta look into this.

I can't speak on behalf of other turbo manufacturers as I only have Garrett turbos in my car but I do know that as per recommendation from Honeywell they advise you o run a (and don't quote me on this ill probably have to find the information again) 1/4"-1/8" restrictor at the center casing. I'm not so sure that your seal has actually been wiped out just yet. Anything possible sure but I do know that just as Cosmo stated there are some design flaws in turbo kits on the market for our cars. No I'm not doubting S&R's ability to design a kit by any means but it is easy to overlook tiny little details that can cause persistent nuisances.
Do you have a catch can on your car midnight?

MidnightBlueZ · 06-09-2014, 02:36 PM

Quote:

Originally Posted by ANMVQ

Yea those times were painful, On top of lose a lot of $$$$ 10k, ( Dealer screwed me) LONG story, Its on here :/
Did you get the "new" Map ID from him yet, I finally got my cable late on Friday.

Yes, uprev came through on the same day and got me runnin again! Man that's not hard to believe.. Sweet glad you finally got that.

MidnightBlueZ · 06-09-2014, 02:39 PM

Quote:

Originally Posted by Rid3_FaM0uS

I can't speak on behalf of other turbo manufacturers as I only have Garrett turbos in my car but I do know that as per recommendation from Honeywell they advise you o run a (and don't quote me on this ill probably have to find the information again) 1/4"-1/8" restrictor at the center casing. I'm not so sure that your seal has actually been wiped out just yet. Anything possible sure but I do know that just as Cosmo stated there are some design flaws in turbo kits on the market for our cars. No I'm not doubting S&R's ability to design a kit by any means but it is easy to overlook tiny little details that can cause persistent nuisances.
Do you have a catch can on your car midnight?

Yeah I still need to run it by Bobby. I hope it's not cause I really don't wanna send it off to precision but if that's it then it is what it is lol. I do have a catch can, it came as part of the kit.

MidnightBlueZ · 07-17-2014, 09:59 PM

Quote:

Originally Posted by willy2371

That exhaust sounds pretty awesome!

Hey Willy, thanks man! Had it made at a local shop in Smyrna.

MidnightBlueZ · 08-31-2014, 06:32 PM

What's up guys.. So I sent my car back down to VSR to get something's worked out. I received word that it made it there today in one piece. I will let you all know when I get some updates from Bobby on the status. Stay tuned!

MidnightBlueZ · 09-02-2014, 08:03 PM

Got a call from Bobby today.. He seems to think it may have a wrist pin that's gone kaput. Looks like another built block for the boards will be in the works soon. Gave him the go ahead to tear it down and assess the damage.

Staples · 09-02-2014, 08:48 PM

Quote:

Originally Posted by MidnightBlueZ

Got a call from Bobby today.. He seems to think it may have a wrist pin that's gone kaput. Looks like another built block for the boards will be in the works soon. Gave him the go ahead to tear it down and access the damage.

Your motor went? They won't know for sure until the motor is completely disassembled. How many miles were on the motor and how many boosted miles did you have on her?

MidnightBlueZ · 09-02-2014, 09:16 PM

Quote:

Originally Posted by Staples

Your motor went? They won't know for sure until the motor is completely disassembled. How many miles were on the motor and how many boosted miles did you have on her?

Well the motor hasn't gone but I think it is in some early stages. I was told it sounds like a wrist pin but yes until it's disassembled there's no way to be sure. I started hearing a ticking noise that sounded like loud valve chatter to me (untrained ear). This first happened right after I got home from Tampa. The car continued to run fine minus the noise which we thought might be the VVEL. So after months of enduring the nuisances it's had since getting it back I sent it back down to VSR. The motor had 15k maybe 15.5k when it got boosted and now has a little over 20k.

Z eliminator · 09-03-2014, 08:51 AM

is your car a 6mt or a 7At?

Z

06-06-2014, 07:43 PM	#46 (permalink)
Rid3_FaM0uS Track Member Join Date: Apr 2012 Location: Wapakoneta, Ohio Posts: 506 Drives: 2011 BS Nismo 370z Rep Power: 45	Does your turbo have a feed restrictor? A lot of turbos will get flooded per say with too much oil and it will leak out past the seal causing it to burn oil also if you have bad crank case ventilation the pressure will force oil from the turbo out the seal and cause it to burn oil that way as well MidnightBlueZ likes this. __________________ Always under construction. . .

06-07-2014, 07:57 AM	#47 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	I've noticed some of the turbo kit for our cars just have crank case vents instead of rerouting them through the intake. Kojack and MidnightBlueZ like this.

06-09-2014, 08:44 AM	#51 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 20	Yea those times were painful, On top of lose a lot of $$$$ 10k, ( Dealer screwed me) LONG story, Its on here :/ Did you get the "new" Map ID from him yet, I finally got my cable late on Friday. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

06-09-2014, 09:22 AM	#52 (permalink)
Rid3_FaM0uS Track Member Join Date: Apr 2012 Location: Wapakoneta, Ohio Posts: 506 Drives: 2011 BS Nismo 370z Rep Power: 45	[QUOTE=MidnightBlueZ;2850245]You know I'm not sure, I know the line that's on there now is suppose to restrict flow more than the one that was on there before but I guess the seal could be compromised. Bobby seems pretty certain it's coming from the turbo. The drain line doesn't look like it would restrict the flow out, no weird bends. Yeah I'll have to bring that up to him too, didn't think about that. Interesting, yeah I gotta look into this. I can't speak on behalf of other turbo manufacturers as I only have Garrett turbos in my car but I do know that as per recommendation from Honeywell they advise you o run a (and don't quote me on this ill probably have to find the information again) 1/4"-1/8" restrictor at the center casing. I'm not so sure that your seal has actually been wiped out just yet. Anything possible sure but I do know that just as Cosmo stated there are some design flaws in turbo kits on the market for our cars. No I'm not doubting S&R's ability to design a kit by any means but it is easy to overlook tiny little details that can cause persistent nuisances. Do you have a catch can on your car midnight? __________________ Always under construction. . .

09-02-2014, 08:03 PM	#57 (permalink)
MidnightBlueZ Enthusiast Member Join Date: Apr 2013 Location: Nashville, TN Posts: 291 Drives: 13 Nissan 370Z Turbo Rep Power: 17	Got a call from Bobby today.. He seems to think it may have a wrist pin that's gone kaput. Looks like another built block for the boards will be in the works soon. Gave him the go ahead to tear it down and assess the damage. Last edited by MidnightBlueZ; 09-02-2014 at 09:10 PM. Reason: Typo

06-07-2014, 10:53 AM	#49 (permalink)
Austonian Enthusiast Member Join Date: Mar 2013 Location: Texas Posts: 371 Drives: 40th Anniversary Rep Power: 28	Thats awesome, so just to clarify the original uprev tune was included with the turbo install and the dealer wiped the ecu clean when you took it in right?

08-31-2014, 06:32 PM	#56 (permalink)
MidnightBlueZ Enthusiast Member Join Date: Apr 2013 Location: Nashville, TN Posts: 291 Drives: 13 Nissan 370Z Turbo Rep Power: 17	What's up guys.. So I sent my car back down to VSR to get something's worked out. I received word that it made it there today in one piece. I will let you all know when I get some updates from Bobby on the status. Stay tuned!

09-03-2014, 08:51 AM	#60 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,660 Drives: 370 Z 7AT Sports Rep Power: 20	is your car a 6mt or a 7At? Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
[FOR SALE] HKS 6th Gen EVC Turbo Boost Controller and PLX Devices Turbo Sensors Gauges	modme	Parts for sale (Private Classifieds)	17	03-20-2014 04:03 PM
VSR Motorsports 350z Single Turbo Kit Video	SRperformance	Forced Induction	4	08-08-2013 07:33 PM
Going FI with VSR Motorsports top mount single turbo	regulator11	Forced Induction	32	05-20-2013 08:04 AM
Boost leak on the turbo	LafitteZ	Forced Induction	15	10-02-2012 09:15 PM