Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   Nitrous build is finished (http://www.the370z.com/forced-induction/85570-nitrous-build-finished.html)

SlowZ 06-16-2014 02:24 PM

It's not like I spray it every day lol. Iv tested it once to see how it hit. The car used to be on a 75 shot no tune or plugs. Now I have HKS plugs and I'm awaiting a few more things before I can get tuned. My jets are like a 28 and 40 something I can't remember off the top of my head. If you choose to not believe me then that's on you. You can call up Sebastian at specialty z and ask if he's talked to someone that wants to spray a 180 shot and see what he tells you. A 50 shot is pointless IMO. That's only like high 30s low 40s whp. This is a beefier motor than the 350. I'll be fine on a race gas tune

black_sedan 06-16-2014 03:45 PM

Can't wait to see what she runs. Should be plenty to get you into the 11s if the traction is there.

SlowZ 06-16-2014 04:02 PM

It should be low 11s. I'm changing out the rear brakes to stock 350z ones so I can fit a 15 inch wheel on there. Iv talked to phunk and he was doing the same thing to his Z for traction. 15s just offer so much more sizes than a 16 does

madwi 06-19-2014 05:20 AM

Quote:

Originally Posted by SlowZ (Post 2861037)
Iv sprayed it once just to test how it hits and no I'm not tuned... YET. I still need to finish up some things before i take it in. It hits hard! I do not have a window switch but I'm thinking about getting one. Iv never had a problem in the past but we'll see. I was tossing up doing a progressive controller because I did want to spray off the line with DR's but thst the whole point in doing a huge shot lol I don't want to spray off the line with a lesser of a shot but then again we'll see

With that shot size I am guessing you will need SOME type of controller if you want to spray first gear and not just spin until your tires burn off. I am curious to hear how it hooks (if at all). Keep us updated please :tup:

JC671 06-19-2014 08:49 AM

Should easily break 11s stateside with as good as the tracks are prepped there..


Downgrading brakes is something that I have comtemplated to run full slicks..

JC671 06-19-2014 08:54 AM

Quote:

Originally Posted by SlowZ (Post 2861197)
It's not like I spray it every day lol. Iv tested it once to see how it hit. The car used to be on a 75 shot no tune or plugs. Now I have HKS plugs and I'm awaiting a few more things before I can get tuned. My jets are like a 28 and 40 something I can't remember off the top of my head. If you choose to not believe me then that's on you. You can call up Sebastian at specialty z and ask if he's talked to someone that wants to spray a 180 shot and see what he tells you. A 50 shot is pointless IMO. That's only like high 30s low 40s whp. This is a beefier motor than the 350. I'll be fine on a race gas tune

So your 28 and 40 is "your" 188 shot?

I really want to see where your got that chart...

I currently have 150shot jets in my car and it's a lot bigger than those jets you just claimed to be 188... I've never heard of a 188 either....

madwi 06-19-2014 08:56 AM

Quote:

Originally Posted by SlowZ (Post 2861197)
It's not like I spray it every day lol. Iv tested it once to see how it hit. The car used to be on a 75 shot no tune or plugs. Now I have HKS plugs and I'm awaiting a few more things before I can get tuned. My jets are like a 28 and 40 something I can't remember off the top of my head. If you choose to not believe me then that's on you. You can call up Sebastian at specialty z and ask if he's talked to someone that wants to spray a 180 shot and see what he tells you. A 50 shot is pointless IMO. That's only like high 30s low 40s whp. This is a beefier motor than the 350. I'll be fine on a race gas tune

What brand of system are you running? That will help with figuring out the jet sizes ect. I am just curious about your setup.

megalapagas 06-19-2014 01:00 PM

Quote:

Originally Posted by JC671 (Post 2864898)
So your 28 and 40 is "your" 188 shot?

I really want to see where your got that chart...

I currently have 150shot jets in my car and it's a lot bigger than those jets you just claimed to be 188... I've never heard of a 188 either....

Thiss^^. . .

SlowZ 06-19-2014 04:45 PM

I'm not running one specific "kit"
My jets are from NOS. I said I can't remember off the top of my head what the numbers were. I was taking a wild guess. I had a plastic baggy that had the numbers written on them when I went to buy new ones. I originally wanted a 180 shot but the jet sizes didn't equal that amount so the closest was either a 160 something or a 188 which is what I chose.

JC671 06-23-2014 06:52 AM

Quote:

Originally Posted by SlowZ (Post 2865513)
I'm not running one specific "kit"
My jets are from NOS. I said I can't remember off the top of my head what the numbers were. I was taking a wild guess. I had a plastic baggy that had the numbers written on them when I went to buy new ones. I originally wanted a 180 shot but the jet sizes didn't equal that amount so the closest was either a 160 something or a 188 which is what I chose.


What solenoid brand are you using? Pic of your engine bay and "NOS" jet sizing. How did you come up with 188? That's my biggest question. Because jet sizing are typically in 25 shot increments. If you dynoed the car, and transferred the jet sizing to WHP, can you please provide a dyno for reference with a baseline and the increase.

gbrettin 06-24-2014 06:39 PM

1 Attachment(s)
Quote:

Originally Posted by SlowZ (Post 2861197)
It's not like I spray it every day lol. Iv tested it once to see how it hit. The car used to be on a 75 shot no tune or plugs. Now I have HKS plugs and I'm awaiting a few more things before I can get tuned. My jets are like a 28 and 40 something I can't remember off the top of my head. If you choose to not believe me then that's on you. You can call up Sebastian at specialty z and ask if he's talked to someone that wants to spray a 180 shot and see what he tells you. A 50 shot is pointless IMO. That's only like high 30s low 40s whp. This is a beefier motor than the 350. I'll be fine on a race gas tune

Either you are off or I am off on our setup. I have NOS pills rated at 100HP and they are 26F and 46N. I'll dig up my chart and post it for everyone tomorrow.
http://www.the370z.com/attachment.ph...1&d=1403652871

Also, a 50HP (17F and 30N) was pretty substantial (and REALLY safe) in the quarter mile for me. I was able to take my time from a 13.38 to a 12.66. It's not blow your mind quick but it's a small kick in the pants.

Nissan370 06-25-2014 06:08 AM

when i had nitrous on my mustang it was 25/50/75/100/125/150 but there was a kit with 30/60/90/100/125/150

but never hear of an odd number

but with my mustang and my probe gt with a
50shot i was adding 40hp/70tq
75shot i added 60hp/100tq
so even if your not feeling the hp you can feel the torque

am kinda a big fan of nitrous so im watching you guys nitrous post

i may be doing a 100shot on my car next year as long as i can run it safely with the turbo

njobe89 06-25-2014 08:01 AM

i saw someone asked earlier but it was never answered... has someone ran nitrous with FI?

ANMVQ 06-25-2014 08:33 AM

I was an still kinda am I fan of NOS, I had a progressive shot on my 650HP Monte SS,( 250 Shot) Thing was scary, I'm just nervous about running this on the the VQ. I saw a few people fry rings.

Great write up and work BTW, :)

gbrettin 06-25-2014 04:52 PM

1 Attachment(s)
I snapped a picture of the F/N chart from Zex. Take it with a small grain of salt but I did a comparison based off the weight of my car (3450lbs) and ET (13.38w/o and 12.66 w spray) and came up with approximately 50HP gained when using pills 17F and 30N. One can assume that the other pill sizes would put you in the ball park of what they have shown.


** EDIT **
The picture below is for single throttle bodies.
** EDIT **

http://www.the370z.com/attachment.ph...1&d=1403733095


All times are GMT -5. The time now is 10:43 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2