Meth/water injection?

Mkai0 · 01-28-2014, 06:38 PM

Aquamist is a good choice and is what I use. When I moved to Texas, I knew this was a must. The Aquamist held up well in 110F Texas heat. It also helped tremendously with keeping intake air temps down and boost levels consistent. In the winter I don't use it much and actually tend to turn it off.

JWillis72 · 01-28-2014, 06:43 PM

Quote:

Originally Posted by Mkai0

Aquamist is a good choice and is what I use. When I moved to Texas, I knew this was a must. The Aquamist held up well in 110F Texas heat. It also helped tremendously with keeping intake air temps down and boost levels consistent. In the winter I don't use it much and actually tend to turn it off.

Great! Thank you for your input! I probably wont run mine unless it's real hot or on the track. It's really to save the motor when I'm beating on it.

Nissan370 · 01-29-2014, 06:39 AM

when i had my stillen i used stage 2 snowperformance
i did not get it tune for power but i also used it for the cooling effect
and when using it i could touch the intake manifold after a run before it the intake manifold was so hot i could cook an egg on it

i still have every thing wired up and think i may use it with my turbo kit

i had a single bung weild onto the intake just before the elbow
and in the cockpit i had a switch to turn the system on and off with an led indicator for when i was getting low on fluid

JWillis72 · 01-29-2014, 06:51 AM

Quote:

Originally Posted by Nissan370

when i had my stillen i used stage 2 snowperformance
i did not get it tune for power but i also used it for the cooling effect
and when using it i could touch the intake manifold after a run before it the intake manifold was so hot i could cook an egg on it

i still have every thing wired up and think i may use it with my turbo kit

i had a single bung weild onto the intake just before the elbow
and in the cockpit i had a switch to turn the system on and off with an led indicator for when i was getting low on fluid

Did you see any change in oil or water temps with it?

Chuck33079 · 01-29-2014, 07:57 AM

Quote:

Originally Posted by JWillis72

Did you see any change in oil or water temps with it?

I can't imagine it having a dramatic effect on anything but IATs.

KramChaos · 01-29-2014, 09:05 AM

Quote:

Originally Posted by Chuck33079

I can't imagine it having a dramatic effect on anything but IATs.

^^ definitely. Air is not very effective at heat transfer (especially when compared to water/coolant or oil) without some type of heat sink.

01-28-2014, 06:38 PM	#1 (permalink)
Mkai0 Base Member Join Date: Dec 2010 Location: Somewhere in Texas Posts: 209 Drives: 2008 G35 Sedan Rep Power: 16	Aquamist is a good choice and is what I use. When I moved to Texas, I knew this was a must. The Aquamist held up well in 110F Texas heat. It also helped tremendously with keeping intake air temps down and boost levels consistent. In the winter I don't use it much and actually tend to turn it off. COSMO likes this. __________________ Eibach, Tanabe, Blitz, Vertini, GTM stage 1.5 SC, Aquamist, Invidia, Alto built 5AT, Edge Racing, Racelogic, GTM driveshaft, 440 whp in 101F TX heat..

01-29-2014, 06:39 AM	#3 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 16	when i had my stillen i used stage 2 snowperformance i did not get it tune for power but i also used it for the cooling effect and when using it i could touch the intake manifold after a run before it the intake manifold was so hot i could cook an egg on it i still have every thing wired up and think i may use it with my turbo kit i had a single bung weild onto the intake just before the elbow and in the cockpit i had a switch to turn the system on and off with an led indicator for when i was getting low on fluid __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stillen SC kit with meth injection	gussyturbo z	Forced Induction	17	05-30-2013 05:34 PM
[FOR SALE] STS meth kit	blackonorange	Parts for sale (Private Classifieds)	0	08-09-2012 11:18 PM
Any benefit to installing meth injection on Stillen SC?	Neo187H	Forced Induction	5	04-16-2012 03:28 PM
how does water/meth injection work?	sojirovskensi	Forced Induction	5	10-04-2011 12:20 AM
Water/Meth injection	LateralG'z	Forced Induction	35	07-14-2010 01:22 AM