Heat soak - vented hood options that are not "louvered"

Jordo! · 04-02-2014, 03:44 AM

Quote:

Originally Posted by dmhenderson

Edit: Just want to clarify I'm looking for venting options due to my FI build. I'm looking for solutions that take the intercooler into account.

Quote:

Originally Posted by luigi90210

OPs not talking about intercoolers, hes talking about engine bay air temps

unless there is a wind tunnel to test a scoop, vents are the only real way to remove heat from the engine bay, the scoop will work, but how well no one knows

Er... I'm pretty sure the OP noted that he was taking his intercooler into account...

Isamu · 04-02-2014, 04:21 AM

I am deployed again, so I have made no progress... Anyone can use my design... as long as if you sell it, I get a cut

Nixlimited · 04-02-2014, 09:50 AM

How do the VIS hoods compare to Seibon in terms of quality and fitment? My one huge holdup on a CF hood is the damn pins. I think they are hideous.

Chuck33079 · 04-02-2014, 09:58 AM

Quote:

Originally Posted by Nixlimited

How do the VIS hoods compare to Seibon in terms of quality and fitment? My one huge holdup on a CF hood is the damn pins. I think they are hideous.

Aerocatch. If you've got to use pins, they are by far the least visually offensive.

theDreamer · 04-02-2014, 10:02 AM

Fitment can be a tough call, I have a seibon and it was fine. Took the shop about an hour to fit it and line it up 100%. Many with the VIS hood have no problems either.
Also, you do not really need hood pins, as our cars have locks on it and, with the seibon, it has slots for all 3. Now if you get into road racing you might consider it as a safety requirement but not needed on the street.

Chuck33079 · 04-02-2014, 10:03 AM

Quote:

Originally Posted by theDreamer

Fitment can be a tough call, I have a seibon and it was fine. Took the shop about an hour to fit it and line it up 100%. Many with the VIS hood have no problems either.
Also, you do not really need hood pins, as our cars have locks on it and, with the seibon, it has slots for all 3. Now if you get into road racing you might consider it as a safety requirement but not needed on the street.

I thought the issue was the locks pulling out of the slots over time from stress?

theDreamer · 04-02-2014, 10:08 AM

Quote:

Originally Posted by Chuck33079

I thought the issue was the locks pulling out of the slots over time from stress?

Probably so, but not unless you are really pushing the car like on a track.
Is an item to just add to the check list to check when you pop the hood and do an inspection.

Nixlimited · 04-02-2014, 10:38 AM

Anyone know if the VIS has slots for all the locks?

wstar · 04-02-2014, 01:25 PM

I don't think the VIS does, since their marketing material mentions hood pins. What I like even better than the looks/functionality of the Aerocatch is the QuickLatch: Low Profile

ANMVQ · 04-02-2014, 01:51 PM

Quote:

Originally Posted by Nixlimited

How do the VIS hoods compare to Seibon in terms of quality and fitment? My one huge holdup on a CF hood is the damn pins. I think they are hideous.

have you tired to see if Alex and the guys at Autokits X make a AK hood. My fitment was 100% and they use the stock equipment.

ANMVQ · 04-02-2014, 01:55 PM

Quote:

Originally Posted by wheee!

This is a shot of the venting of the JP-R hood. It has side vents that come with rain guards which can be removed with push pins. The centre vent seems to sit almost OVER the radiator shroud so I am not sure if the venting will help with heat soak or not. Might vent fresh air from the front this way...

oh, and the fitment is darn near perfect. Slight gap near the hinge on the drivers side but I think I can massage that away.

Whos hood is that?? That's Autokits hood?

martin82 · 04-02-2014, 01:58 PM

i'm going on a guess, but the vis should also have the bolt holes to transfer the 3 latches like my seibon did. The reason why they say hoodpins are a must is prob for liability reasons.

On my seibon Ts hood I did install hood pins but was going too ended up selling it. I tested it at 155mph for a total of about 1-2 hrs total no issues. And 140's also no problem at the track, but I always felt uncomfortable not having the pins on, so when I order the VIS I'll install aerocatch latches or similar.

theDreamer · 04-02-2014, 02:18 PM

Quote:

Originally Posted by martin82

i'm going on a guess, but the vis should also have the bolt holes to transfer the 3 latches like my seibon did. The reason why they say hoodpins are a must is prob for liability reasons.

On my seibon Ts hood I did install hood pins but was going too ended up selling it. I tested it at 155mph for a total of about 1-2 hrs total no issues. And 140's also no problem at the track, but I always felt uncomfortable not having the pins on, so when I order the VIS I'll install aerocatch latches or similar.

That is what I always told, on the street it should be fine though there are stories of people having problems. Though for the track and safety it is worth the look to jump over to hood pins for safety & security.

wheee! · 04-02-2014, 02:21 PM

Quote:

Originally Posted by ANMVQ

Whos hood is that?? That's Autokits hood?

That's my JP-R hood from Exteme Dimensions. Very good fit overall but a small height issue at the back hinges that the bodyshop says they can fix. It goes in Monday for paint...

ANMVQ · 04-02-2014, 02:57 PM

Quote:

Originally Posted by wheee!

That's my JP-R hood from Exteme Dimensions. Very good fit overall but a small height issue at the back hinges that the bodyshop says they can fix. It goes in Monday for paint...

HMM?? You know autokits makes the same hood ?

04-02-2014, 09:50 AM	#258 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 25	How do the VIS hoods compare to Seibon in terms of quality and fitment? My one huge holdup on a CF hood is the damn pins. I think they are hideous. __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

04-02-2014, 10:02 AM	#260 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Fitment can be a tough call, I have a seibon and it was fine. Took the shop about an hour to fit it and line it up 100%. Many with the VIS hood have no problems either. Also, you do not really need hood pins, as our cars have locks on it and, with the seibon, it has slots for all 3. Now if you get into road racing you might consider it as a safety requirement but not needed on the street. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

04-02-2014, 10:38 AM	#263 (permalink)
Nixlimited A True Z Fanatic Join Date: Aug 2009 Location: San Diego Posts: 1,235 Drives: 15 GT-R / 11 Prius Rep Power: 25	Anyone know if the VIS has slots for all the locks? __________________ Car Sold! Pleasure being a part of the Z community. New ride: 2015 GT-R - 647 WHP / 641 WTQ (e85) & 543 WHP / 519 WTQ (91)

04-02-2014, 01:25 PM	#264 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	I don't think the VIS does, since their marketing material mentions hood pins. What I like even better than the looks/functionality of the Aerocatch is the QuickLatch: Low Profile Chuck33079 likes this. __________________ 7AT Track Car! Journal thread / Car setup details

04-02-2014, 01:58 PM	#267 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	i'm going on a guess, but the vis should also have the bolt holes to transfer the 3 latches like my seibon did. The reason why they say hoodpins are a must is prob for liability reasons. On my seibon Ts hood I did install hood pins but was going too ended up selling it. I tested it at 155mph for a total of about 1-2 hrs total no issues. And 140's also no problem at the track, but I always felt uncomfortable not having the pins on, so when I order the VIS I'll install aerocatch latches or similar. wheee! likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
18"x10" and 18"x10.5" Track Wheels Options?	scruffydog	Wheels & Tires	100	03-30-2017 09:00 AM
[FOR SALE] Fly1 motorsports "rs1 vented fenders"	MIGHTYMOUSE	Parts for sale (Private Classifieds)	9	03-09-2013 04:27 AM
What to remove in engine bay to help heat soak?	AlphaSnacks	Engine & Drivetrain	9	07-25-2012 04:22 PM
Heat soak, what to expect	Evil Sports	Engine & Drivetrain	62	07-09-2012 10:40 PM