Boosted Performance round 2 list

Chuck33079 · 04-14-2014, 09:17 AM

Quote:

Originally Posted by jwick

Not to mention, it wouldn't be that bad since it would just be swapping the two lines at the block adapter. I don't even think that would require cutting zip ties.

Yeah, those wouldn't be too bad. If we have to reroute the turbo oil lines I may eat a bullet.

jwick · 04-14-2014, 09:24 AM

Quote:

Originally Posted by Chuck33079

Yeah, those wouldn't be too bad. If we have to reroute the turbo oil lines I may eat a bullet.

I was about there when I realized the drain line to the pump was in the wrong position. Thank God I was able to squeeze it back thru and reroute under the charge pipe cuz no way it sliding between the turbo and the sub-frame.

GaleForce · 04-14-2014, 09:38 AM

Quote:

Originally Posted by Chuck33079

Yeah, those wouldn't be too bad. If we have to reroute the turbo oil lines I may eat a bullet.

So you don't want to come over to my place to help me redo mine? I have beer.

jwick · 04-14-2014, 09:55 AM

Quote:

Originally Posted by GaleForce

So you don't want to come over to my place to help me redo mine? I have beer.

Your's shouldn't be too bad with just adding the GReddy. It does get pretty crowded above the sway bar when you have to add another oil line to the area that already has both Exa pump lines, the existing line going to the oil cooler and the charge pipe. That was one picture I didn't capture from the weekend. I'll try to remember to grab it this weekend.

Bring some of that Canadian wiskey and we might be talking...

GaleForce · 04-14-2014, 11:18 AM

Quote:

Originally Posted by jwick

Your's shouldn't be too bad with just adding the GReddy. It does get pretty crowded above the sway bar when you have to add another oil line to the area that already has both Exa pump lines, the existing line going to the oil cooler and the charge pipe. That was one picture I didn't capture from the weekend. I'll try to remember to grab it this weekend.

Bring some of that Canadian wiskey and we might be talking...

You're right, but I'm changing out my fittings too. All of them...

The whiskey is a given.

Chuck33079 · 04-14-2014, 11:20 AM

Quote:

Originally Posted by GaleForce

I'm changing out my fittings too. All of them...

**** all of that. Seriously, every single bit.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 11:17 AM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 05:40 PM
2012 Option List Includes Dealer-Installed Performance	SeattleLion	Nissan 370Z General Discussions	3	10-08-2011 02:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Nissan 370Z General Discussions	16	07-13-2011 11:47 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Northern California Region	0	07-01-2011 07:13 PM