Boosted Performance round 2 list

Boosted Performance · 03-20-2014, 11:58 AM

Quote:

Originally Posted by jwick

Sasha you still planning to try and work up a stock oem downpipe with cats in it when the in-house build starts?

Yup.

I will try to make it on V-bands, that way you can just install the converter for inspection purposes, and then go back to a piece of straight pipe after the inspection is done. It would take about 5 minutes to swap it out once the car is up, and the area is accessible.

AlexRaymond19 · 03-20-2014, 12:25 PM

Quote:

Originally Posted by Boosted Performance

Yup.

I will try to make it on V-bands, that way you can just install the converter for inspection purposes, and then go back to a piece of straight pipe after the inspection is done. It would take about 5 minutes to swap it out once the car is up, and the area is accessible.

That sounds like an amazing idea!

Sasha, after the round is done, how soon do you expect the next round to roll out?

jwick · 03-20-2014, 12:50 PM

Quote:

Originally Posted by Boosted Performance

Yup.

I will try to make it on V-bands, that way you can just install the converter for inspection purposes, and then go back to a piece of straight pipe after the inspection is done. It would take about 5 minutes to swap it out once the car is up, and the area is accessible.

If I read into this properly you are going to make it to replace the last section of downpipe and recir piping? So for those of us that might want to run it full time it would v-band right up as a replacement for that last section?

Depending on exhaust fume smell once the car is fully tuned, I'm might order one from you to just run full time. I'd rather have something fabricated by you than have the random shop chop up the piping on the kit.

Boosted Performance · 03-20-2014, 07:02 PM

Quote:

Originally Posted by AlexRaymond19

That sounds like an amazing idea!

Sasha, after the round is done, how soon do you expect the next round to roll out?

Hope to have a couple of kits around come May. Can't say for sure, but that is the goal.

Quote:

Originally Posted by jwick

If I read into this properly you are going to make it to replace the last section of downpipe and recir piping? So for those of us that might want to run it full time it would v-band right up as a replacement for that last section?

Depending on exhaust fume smell once the car is fully tuned, I'm might order one from you to just run full time. I'd rather have something fabricated by you than have the random shop chop up the piping on the kit.

Once I have one of the donor cars back (provided I can sway him to bring the car for a week) I would look in to alternatives in order to give you guys more options. I can't say that it would work out 100%, but it is something I would look in to for sure.

This would also mean another set of jigs for everything after the turbo, and that is time consuming.

JMac88 · 03-20-2014, 02:16 PM

Might be a bit late to the party, but I still like my aeroforce gauges. For those that don't want alot of gauges it shows two perimeters and will allow you to automatically set up cycling of perimeters that are less important.

TopgunZ · 03-20-2014, 02:53 PM

Or do this. It cost me $75 total for Bluetooth obdII and used tablet and I have displayed AFR/Boost/Water temp/Intake Temp/EGT's/Timing Advance/MAF/and my ever missed Speedo! Its incredible. Plus my background is CARVIS which plays off of Iron Mans JARVIS system. Same look like he has in his HUD. Everyone loves it. It also talks to you when you have hit certain limits! Which is even cooler than alarms..lol.. If that layout isn't your thing you can switch to any of hundreds of themes and create your own gauge layout and look.

It also reads out current Horsepower and Torque which I have on another page of the layout which you just swipe your finger across the tablet to view. You can have up to 6 different pages of gauges.

You can even track your cars route with it. It has a REAL mpg indicator if you punch in the numbers at the E85 pump station.

There are hundreds of other functions it can read but I couldn't think of anything else I wanted displayed that would actually be useful.

Also you can surf the web while driving which is super safe...lol.. But I stream Pandora through it and to my car speakers and I use google maps as my navi.

The only gauge I don't trust of it is Boost. I am still running a Defi boost gauge and oil pressure gauge.

zguynate · 03-20-2014, 04:00 PM

I installed my clutch/flywheel/csc on Tuesday. Ill hopefully be starting the turbo install Wednesday. Talk about excited!

jlo370z · 03-20-2014, 06:18 PM

Quote:

Originally Posted by dragonbreath

I installed my clutch/flywheel/csc on Tuesday. Ill hopefully be starting the turbo install Wednesday. Talk about excited!

my intentions is to start right behind you on Friday. got a fed ex notice today, uprev on the way.

AlexRaymond19 · 03-21-2014, 12:18 PM

Quote:

Originally Posted by dragonbreath

I installed my clutch/flywheel/csc on Tuesday. Ill hopefully be starting the turbo install Wednesday. Talk about excited!

Exciting!!! How did you find the install? Going to do mine by myself. What DIY thread did you use, if any?

[QUOTE=TopgunZ;2745621]Or do this. It cost me $75 total for Bluetooth obdII and used tablet and I have displayed AFR/Boost/Water temp/Intake Temp/EGT's/Timing Advance/MAF/and my ever missed Speedo! Its incredible. Plus my background is CARVIS which plays off of Iron Mans JARVIS system. Same look like he has in his HUD. Everyone loves it. It also talks to you when you have hit certain limits! Which is even cooler than alarms..lol.. If that layout isn't your thing you can switch to any of hundreds of themes and create your own gauge layout and look.

It also reads out current Horsepower and Torque which I have on another page of the layout which you just swipe your finger across the tablet to view. You can have up to 6 different pages of gauges.

You can even track your cars route with it. It has a REAL mpg indicator if you punch in the numbers at the E85 pump station.

Wow, this looks amazing! Sounds like a cheaper alternative too. How accurate do you find it?

TopgunZ · 03-21-2014, 02:13 PM

Quote:

Wow, this looks amazing! Sounds like a cheaper alternative too. How accurate do you find it?

Well the speedo matches exactly to my needle and the radars along side the road. Rev's are the exact same. The water temp is spot on. My AFR seems to be accurate. EGT's seem to be in the right ballpark. But again, I don't trust the boost gauge as it says the max boost level my car has ever seen is 1.5lbs which is impossible since I'm still NA..lol.

jofro6 · 03-21-2014, 02:24 PM

What program is that you are running on the tablet? Def looks sick

TopgunZ · 03-21-2014, 09:49 PM

Quote:

Originally Posted by jofro6

What program is that you are running on the tablet? Def looks sick

Its torque pro with the nissan advanced. Add on is the carvis but it came in a pack with a few other wicked themes.

Joepro · 03-22-2014, 08:11 AM

My EBC is coming tuesday, any BP owners help me out with a diagram to plumb this thing?

m3chhawk · 03-22-2014, 02:11 PM

Here's my chicken scratch from my HKS EVC-S

Cell · 03-22-2014, 02:34 PM

This is what I did.

03-20-2014, 02:16 PM	#5 (permalink)
JMac88 Enthusiast Member Join Date: Jun 2010 Location: Edmonton AB Posts: 416 Drives: 2010 PW 370z Rep Power: 14	Might be a bit late to the party, but I still like my aeroforce gauges. For those that don't want alot of gauges it shows two perimeters and will allow you to automatically set up cycling of perimeters that are less important. __________________ Full Mod List

03-20-2014, 04:00 PM	#7 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,053 Drives: 09 370z Rep Power: 73	I installed my clutch/flywheel/csc on Tuesday. Ill hopefully be starting the turbo install Wednesday. Talk about excited! __________________ 2009 370z touring w/sports package

03-21-2014, 02:24 PM	#11 (permalink)
jofro6 Track Member Join Date: Mar 2012 Location: Long Island, NY Posts: 603 Drives: 2012 370Z Touring Rep Power: 14	What program is that you are running on the tablet? Def looks sick __________________ 2012 Red 6Spd Touring/Nav.. FI CF NonRes CBE and Res TP #682 Fly1 RS1 CF Fenders

03-22-2014, 08:11 AM	#13 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 33	My EBC is coming tuesday, any BP owners help me out with a diagram to plumb this thing? __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

03-22-2014, 02:11 PM	#14 (permalink)
m3chhawk Track Member Join Date: Sep 2012 Location: Kansas City Posts: 878 Drives: '11 370Z SPT 6MT BLK Rep Power: 24	Here's my chicken scratch from my HKS EVC-S __________________ F.I. CF CBE \| Avant Garde M310 \| BC BR's \| ONEighty \| Status \| EvoR \| Stillen \| Whiteline \| B&M \| Bespoke Details Boosted Performance \| Precision Turbo \| Tial \| HKS \| Innovate Motorsports \| Bosch \| Treadstone \| Walbro \| UpRev \| Depo

03-22-2014, 02:34 PM	#15 (permalink)
Cell A True Z Fanatic Join Date: Jan 2010 Location: Chicago Posts: 1,449 Drives: A Garbage Truck Rep Power: 21	This is what I did.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 11:17 AM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 05:40 PM
2012 Option List Includes Dealer-Installed Performance	SeattleLion	Nissan 370Z General Discussions	3	10-08-2011 02:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Nissan 370Z General Discussions	16	07-13-2011 11:47 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Northern California Region	0	07-01-2011 07:13 PM