Boosted Performance round 2 list

Cbtech · 04-08-2013, 02:58 PM

Quote:

Originally Posted by Boosted Performance

This is the list of customers I have at the moment:

Nut_N_Much
Morterbooble
NitrousZ34
chewy08753
m3chhawk (BB upgrade)
sinceday1
Rondo
xgrudgex
sfearl1
V8Killer
Chemy

Cbtech
faceglide
Dzel (BB upgrade)

If you wish to add your name to the list, please post up, and I will edit this list. At the same time, if you wish to have your name removed from the list, please let me know as well.

Thank you,

Sasha

Sasha you had mentioned you will have 10 kits by the end of May. since im 12th how much further out from May should I expect? Just want to keep funding figures in mind. Thank you sir

Boosted Performance · 04-08-2013, 03:14 PM

Quote:

Originally Posted by Cbtech

Sasha you had mentioned you will have 10 kits by the end of May. since im 12th how much further out from May should I expect? Just want to keep funding figures in mind. Thank you sir

I will do my best to make enough kits for all those that are on the list.

Dzel · 04-08-2013, 03:24 PM

Quote:

Originally Posted by Cbtech

Sasha you had mentioned you will have 10 kits by the end of May. since im 12th how much further out from May should I expect? Just want to keep funding figures in mind. Thank you sir

I believe Sasha builds them all at the same time.

Cbtech · 04-08-2013, 04:24 PM

Also i wanted to say that i appreciate you publishing your instructions ahead of time. I'm fairly confident, after reading the instructions, that I will be taking this to ZCar Garage for install.

Boosted Performance · 04-08-2013, 04:53 PM

Quote:

Originally Posted by Cbtech

Also i wanted to say that i appreciate you publishing your instructions ahead of time. I'm fairly confident, after reading the instructions, that I will be taking this to ZCar Garage for install.

No problem. This is something that I should have done a while ago.

The instructions really show how simple, well put together and complete the kit really is.

tower74 · 04-08-2013, 05:48 PM

If I hadn't of already gone the single turbo setup before, of course that kit was garbage, and was really wanting to try out a twin kit. I would be on this list. Plus my future plans do not involve this car (370z) but the kit I am buying will hold me over, for now. GLWS and future success!!!

Dzel · 04-08-2013, 06:44 PM

I just read through the whole installation and I think I can take this on. But I do have a question how do you load your base tune?

Boosted Performance · 04-08-2013, 06:54 PM

Quote:

Originally Posted by Dzel

I just read through the whole installation and I think I can take this on. But I do have a question how do you loaf your base tune?

This is easy, and you can follow the steps provided here:

UpRev - Engine Management

All I will need for you to do is retrieve the OEM ECU ROM#. Each base map will be specific to each customers ECU, allowing the end user to make any adjustments needed. This will also be open to your local tuner if adjustments need to be made.

Dzel · 04-08-2013, 06:56 PM

Thanks!

XwChriswX · 04-08-2013, 09:48 PM

Congrats on the second list of customers. I'm assuming they are all 6MT's? Or is one a 7AT allowing you to R&D on theirs?

Sorry to always be hounding for an AT kit, but your kit is that good. I wants!

Boosted Performance · 04-08-2013, 11:16 PM

Quote:

Originally Posted by XwChriswX

Congrats on the second list of customers. I'm assuming they are all 6MT's? Or is one a 7AT allowing you to R&D on theirs?

Sorry to always be hounding for an AT kit, but your kit is that good. I wants!

Correct, this is all 6 speed MT's. If something comes around after this batch of kits is done, I will have a look at what can be done.

The kit is awesome, so you know your stuff

.

My goal here is to sell a few high quality kits (at a time) VS. a boat load of questionable quality kits, with sub-par components.

And as all of you know, quality takes time.

m3chhawk · 04-09-2013, 01:14 PM

What was the reason for changing from the 1.0 housing to the 1.15 housing?

XwChriswX · 04-09-2013, 01:18 PM

Quote:

Originally Posted by Boosted Performance

Correct, this is all 6 speed MT's. If something comes around after this batch of kits is done, I will have a look at what can be done.

The kit is awesome, so you know your stuff

.

My goal here is to sell a few high quality kits (at a time) VS. a boat load of questionable quality kits, with sub-par components.

And as all of you know, quality takes time.

I know it would be ridiculously hard for you to do so without a car to physically look at, but is it possible for someone to send you clearance measurements of the underbody to at least give you numbers to play with compared to a 6MT housing?

Boosted Performance · 04-09-2013, 01:59 PM

Quote:

Originally Posted by m3chhawk

What was the reason for changing from the 1.0 housing to the 1.15 housing?

The reason for the larger housing is to increase flow/efficiency after 6,000 rpm. These engines have such a high VE, that the increase in housing size will benefit performance without sacrificing low end. The 1.0 housing will still get you to the limits of the OEM block, but the 1.15 a/r housing will do that, and then some. It should flow well enough for those who are looking to build down the road as well. And if that is not enough, there is always the monster 1.32 a/r housing with the 67mm turbo. But you better get a solid engine before going that route.

Quote:

Originally Posted by XwChriswX

I know it would be ridiculously hard for you to do so without a car to physically look at, but is it possible for someone to send you clearance measurements of the underbody to at least give you numbers to play with compared to a 6MT housing?

Sorry, but that just does not work. There are way too many variable at play.

Baer383 · 04-09-2013, 06:42 PM

I tried to download the instructions but it kept failing.

04-08-2013, 06:44 PM	#22 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	I just read through the whole installation and I think I can take this on. But I do have a question how do you load your base tune? __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C. Last edited by Dzel; 04-08-2013 at 08:09 PM.

04-08-2013, 06:56 PM	#24 (permalink)
Dzel A True Z Fanatic Join Date: May 2011 Location: Midland, TX Posts: 3,884 Drives: 11 370Z PW M6 Rep Power: 22	Thanks! __________________ 10secWS6 IF YOU CAN'T SWING IT THEN DON'T BRING IT! Check out Domestic Performance C.C.

04-08-2013, 09:48 PM	#25 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	Congrats on the second list of customers. I'm assuming they are all 6MT's? Or is one a 7AT allowing you to R&D on theirs? Sorry to always be hounding for an AT kit, but your kit is that good. I wants! Dzel and GaleForce like this. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

04-09-2013, 06:42 PM	#30 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 29	I tried to download the instructions but it kept failing. __________________ 2013 ZL1 754 rwhp 747 rwtq

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Boosted Performance single turbo build	Boosted Performance	Forced Induction	1841	09-06-2016 11:17 AM
Boosted Performance single turbo results	Boosted Performance	Forced Induction	136	06-18-2014 05:40 PM
2012 Option List Includes Dealer-Installed Performance	SeattleLion	Nissan 370Z General Discussions	3	10-08-2011 02:21 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Nissan 370Z General Discussions	16	07-13-2011 11:47 PM
Come support A.M. Performance at the Laguna Seca Grand Am round next weekend!!!!!!!	Mike@AMPerformance	Northern California Region	0	07-01-2011 07:13 PM

04-08-2013, 04:24 PM	#19 (permalink)
Cbtech A True Z Fanatic Join Date: Feb 2013 Location: Sacramento, CA Posts: 1,372 Drives: 40th Anniversary Rep Power: 15	Also i wanted to say that i appreciate you publishing your instructions ahead of time. I'm fairly confident, after reading the instructions, that I will be taking this to ZCar Garage for install.

04-08-2013, 05:48 PM	#21 (permalink)
tower74 A True Z Fanatic Join Date: Oct 2011 Location: KCMO Posts: 1,597 Drives: 2017 ZL1 Camaro Rep Power: 369	If I hadn't of already gone the single turbo setup before, of course that kit was garbage, and was really wanting to try out a twin kit. I would be on this list. Plus my future plans do not involve this car (370z) but the kit I am buying will hold me over, for now. GLWS and future success!!!

04-09-2013, 01:14 PM	#27 (permalink)
m3chhawk Track Member Join Date: Sep 2012 Location: Kansas City Posts: 878 Drives: '11 370Z SPT 6MT BLK Rep Power: 24	What was the reason for changing from the 1.0 housing to the 1.15 housing?