|
Sasha, After reading I got 4mm or 1/8 diameter brass fitting and hose But today tial tech said to use to 1/4 brass fitting and hoses , I know all
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
03-25-2013, 05:11 PM
|
#11 (permalink) |
|
Base Member
Join Date: Mar 2011
Location: unknown
Posts: 177
Drives: twinturbo 370z
Rep Power: 15  |
Sasha, After reading I got 4mm or 1/8 diameter brass fitting and hose
But today tial tech said to use to 1/4 brass fitting and hoses , I know all will work , the one million dollar question if I swapped the bovs from both the cold side of the intercooler to one being on the cold side and one being on the hot side would the sound be more as ppl advise and why ? And since the gtm kit I refer is set up this way? Guess one way to find out |
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: Stillen 19 Row Oil Cooler Install - driver side (stock PS cooler unmoved) | djpathfinder | DIY Section (Do-It-Yourself) | 21 | 11-30-2015 05:47 AM |
| Chicago 1/2 Mile, Side-By-Side, Private Runway Shootout!! June 1st & 2nd!! | wannaGOFAST | Mid Western Region | 4 | 02-01-2013 11:27 AM |
| How cold is too cold? (oil cooler related) | DEpointfive0 | Engine & Drivetrain | 3 | 07-22-2012 04:55 PM |
| Stillen Gen 3 Cold air intake Install Cost? | Joe711 | Intake/Exhaust | 7 | 06-03-2011 10:43 PM |
| Pic Request - Shine Auto Rear add-on side view with oem side skirts. | atx370z | Exterior & Interior | 8 | 10-22-2010 10:51 AM |
3Likes
Threaded Mode
