GTM Performance Engineering: MHI Twin Turbo Official Release

mikey1600 · 08-07-2013, 12:50 AM

On a brighter note! who else is super excited and doing the install themselves? Think I'll try get it all done in 1 weekend.

NeverBoneStck · 08-07-2013, 01:49 AM

Starting to see the cracks ......

Alstann · 08-07-2013, 06:40 AM

I'm gonna be installing myself! My car is actually on stands and completely stripped apart, ready for the turbo kit to be installed. It's great having a beater car to drive around town.

I'm gonna be planning to install the kit over a months time, It'll give me time to work with school and my job, as well as make sure I have all my extra parts in order.

OMGiGOTaZ · 08-07-2013, 07:22 AM

Quote:

Originally Posted by Chuck33079

That's how group buys work. You can pay early and wait, or hold off until its in production and pay substantially more.

Well that is my fault for assuming I missed out on the group buy then, hence my confused

OMGiGOTaZ · 08-07-2013, 07:25 AM

Quote:

Originally Posted by SAM@GTM

We are proud to introduce our new line of Twin Turbo Kits for the 370Z based on the venerable Mitsubishi Heavy Industry turbocharger line up. These turbos are water cooled and oil lubricated journal bearing turbos with a great track record of reliability, performance and value. Available with our kits are three different turbo options: 16g (600hp), 18g (700hp), and 20g (900hp). All three turbo options cost the same. Since the VQ37VHR is such a great engine, the 16g and 18g options are great for stock motor builds while the 20g is the way to go for built engine, high horsepower setups.

Since this kit was designed to be as unobtrusive as possible, it is the only turbo kit that retains the factory crash bar. Also, there are no permanent modifications that have to be done to the car to install and run this kit successfully with outstanding performance. In addition, the engine can remain in the vehicle for installation.

As usual, we offer our kits in two basic forms: Turn-Key and Tuner. Our Turn-Key kits come with our GTM Spec ECU flash and upgraded fuel system components. These kits are designed to deliver a complete package that can be installed on a car and perform flawlessly out of the box. Our Tuner Kit, on the other hand is a complete kit that gives the end user the freedom to choose whatever engine management and fuel system components they prefer.

Below are the components included in our Turn-Key Kit.

Cast Ductile Iron Exhaust Manifolds
Pre-Bent Stainless Steel Heat Shields
Exhaust Manifold Install Hardware Kit
4-Ply High Resistance Nomex Silicon couplers
Stainless Steel T-Bolt clamps
Twin 3" x 12 x 12 Bar and Plate Core Intercooler Rated at 900hp (combined)
Polished Aluminum Piping
Pre-made steel braided oil and coolant Supply & Return lines
Mitsubishi water & oil cooled turbocharger
Cold Air Intake System (using k&n filters)
TiAL Q or Turbosmart Raceport Blow-off Valves
GTM Internal Wastegate Actuators
GTM Turbine Outlet to Front Pipe Adapters
GTM High Capacity, Baffled, Oil Pan
All Necessary Hardware and Installation Instructions
GTM Spec ECU Flash using UpRev Osiris
GTM Basic Fuel System with Walbro 255lph Fuel Pump and Bosch EV14

Below are the components included with our Tuner Kit with Internal Wastegates:

Cast Ductile Iron Exhaust Manifolds
Pre-Bent Stainless Steel Heat Shields
Exhaust Manifold Install Hardware Kit
4-Ply High Resistance Nomex Silicon couplers
Stainless Steel T-Bolt clamps
Twin 3" x 12 x 12 Bar and Plate Core Intercooler Rated at 900hp (combined)
Polished Aluminum Piping
Pre-made steel braided oil and coolant Supply & Return lines
Mitsubishi water & oil cooled turbocharger
Cold Air Intake System (using k&n filters)
TiAL Q or Turbosmart Raceport Blow-off Valves
GTM Internal Wastegate Actuators
GTM Turbine Outlet to Front Pipe Adapters
GTM High Capacity, Baffled, Oil Pan
All Necessary Hardware and Installation Instructions

Below are the components included with our Tuner Kit with External Wastegates:

Cast Ductile Iron Exhaust Manifolds
Pre-Bent Stainless Steel Heat Shields
Exhaust Manifold Install Hardware Kit
4-Ply High Resistance Nomex Silicon couplers
Stainless Steel T-Bolt clamps
Twin 3" x 12 x 12 Bar and Plate Core Intercooler Rated at 900hp (combined)
Polished Aluminum Piping
Pre-made steel braided oil and coolant Supply & Return lines
Mitsubishi water & oil cooled turbocharger
Cold Air Intake System (using k&n filters)
TiAL Q or Turbosmart Raceport Blow-off Valves
GTM High Capacity, Baffled, Oil Pan
All Necessary Hardware and Installation Instructions
GTM 3" Downpipes with TiAl or Turbosmart 38mm External Wastegates

Here are the results from our new low reading Mustang dyno testing of the 18g's on the 370Z.

Stock 91 octane
271.2 RWHP (289.1 Dynojet equivalent)
224.3 RWTQ

8psi 91 octane
395.9 RWHP (422.1 Dynojet equivalent)
351.1 RWTQ
(46% more than stock)

11psi 91 octane
494.4 RWHP (527.1 Dynojet equivalent)
395.9 RWTQ
(82% more than stock)

Pricing

Retail price for the Turn-Key Kit is $6,795
Retail price for the Tuner Kit with our 3" Downpipes and External Wastegates is $5,995
Retail price for the Tuner Kit with Internal Wastegates is $5,695

We are offering a Group Buy on these kits here: GTM Performance Engineering: MHI Twin Turbo Kit Group Buy

This group buy has a tiered pricing structure broken down as follows:

Tier One (1 - 25 people)
Tier Two (26 - 50 people)
Tier Three (51+ people)

Tier One
Turn-Key Kit: $5,995
Tuner (w/EWG): $5,395
Tuner (w/IWG): $4,995

Tier Two
Turn-Key Kit: $5,795
Tuner (w/EWG): $5,195
Tuner (w/IWG): $4,795

Tier Three
Turn-Key Kit: $5,595
Tuner (w/EWG): $4,995
Tuner (w/IWG): $4,595

This pricing will no longer be available once these kits are on the shelf and ready to ship. This is on a first come, first serve basis and the closing date of this offer will be determined in the next couple weeks.

Financing Options:

We were able to come up with a couple programs to make some of your dreams come true.

Option 1: 90 days same as cash and 6 months same as cash financing available. Credit check required and approval amount is based on credit score.

Option 2: This option requires 25% down and is limited to only $3,400 of credit. This is for 12 monthly payments. There is no credit check required, very high approval rate and all you need to have is a checking account and a job.

Here are a couple pictures of the kit:

Just to Clarify....

Is the group buy option still available?

Chuck33079 · 08-07-2013, 07:28 AM

"This pricing will no longer be available once these kits are on the shelf and ready to ship. This is on a first come, first serve basis and the closing date of this offer will be determined in the next couple weeks."

This makes me think so, but a quick phone call to Mike or Sam at GTM would answer all of your questions. A phone call, not PM or email. I've had issues emailing/PMing them, but they answered the phone every time I've called them.

SPOHN · 08-07-2013, 07:42 AM

Just call them. You will still get the price. I talked to them every other day.

BlkNismo · 08-07-2013, 07:52 AM

Quote:

Originally Posted by mikey1600

On a brighter note! who else is super excited and doing the install themselves? Think I'll try get it all done in 1 weekend.

Thinking I'll take this on myself, however I am not sure on the clutch/flywheel install as I dont have appropriate tools or space...

m3chhawk · 08-07-2013, 10:34 AM

Quote:

Originally Posted by BlkNismo

Thinking I'll take this on myself, however I am not sure on the clutch/flywheel install as I dont have appropriate tools or space...

My .02 on the clutch and flywheel. Take it to a dealer (I don't say that very often).

If/when the master cylinder fails during install, they will warranty it out. There is also a service bulletin out for GTR Dot 4 brake fluid replacement for the Z's so this will cover your cost of fluid as well. These two things alone save you ~$200 and can make up for a good portion of the labor cost.

COSMO · 08-07-2013, 11:31 AM

What do you talk to them every other day about? Sounds like a romance in the making... lol Maybe that's where I went wrong with mike... hmm...

Quote:

Originally Posted by SPOHN

Just call them. You will still get the price. I talked to them every other day.

SPOHN · 08-07-2013, 11:50 AM

I don't hang on nuts. I hug them. Lol.

Seriously I have some upgrades and working on some custom things and Mike has helped me a lot with very small things and proper tech info. Besides Z1, GTM has been about the only other shop willing to give there time with no rushing to get me off the phone.

SPOHN · 08-07-2013, 12:39 PM

Everyone serves there purpose.

Mike@GTM · 08-07-2013, 12:51 PM

Quote:

Originally Posted by cosmogirl

Mike knows alot but he's is no hands on kind of guy that's why he answers the phone.. Pablo does all of the grunt work at gtm..

Harry,

You are being very disrespectful and certainly do not know us well enough to be making that kind of statement. We have been very courteous to you and professional with you throughout all our business transactions. We are not "blowing you off" as you describe. Every time you call, we answer. Every time you had a request on anything, we reply to you. We are in the business of selling parts and taking care of customers. Why would we blow you off?

When you bought a Blitz boost controller online from another vendor and you were hitting 40psi of boost, you thought it was defective and bought another one from yet another online vendor. Then, when it did the same thing, you called us up and Sam walked you through installing it correctly. We helped you with a part that you didn't even buy from us and you have the nerve to imply that we have poor customer service? Really?

When you called to get our exhaust and complained about the price and the lead time, I told you that we are going to be getting our mandrel bender up and running and will be able to offer our exhaust to you at a better price with a faster turnaround. I told you that when we get it up and running that I would get in touch with you to let you know. You would call up every couple weeks asking the same question. I mean, I can only tolerate being a broken record for so long.

When you asked me about the meth kit, it was late in the afternoon on a Friday and I had an instruction manual that I needed to finish up for a customer and I explained to you that I needed to get that done. I also told you that you can purchase the kit from our website and it would be faster for you to do it that way rather than having me put a quote together for you. Considering that you are perfectly capable of purchasing two Blitz boost controllers from other vendors online, I honestly don't know what is holding you back from purchasing the methanol kit from our website.

Our customer support is unparalleled in this industry and there is always someone to talk to when you call and we are just a phone call away. If we don't meet your standards, I'm sorry. There is only so much we can do.

Ultimately, this is a thread about our new turbo kit and this isn't really the place for this sort of discussion. If you want to continue, please start a different thread.

-Mike

Sh0velMan · 08-07-2013, 01:19 PM

Quote:

Originally Posted by Mike@GTM

...

COSMO · 08-07-2013, 02:43 PM

Alright mike since you have finally decided you untuck your tail from between your legs lets get the facts straight.

1. My car was never boosting at 40 psi because it is not possible. That you should already know but I understand your a desk and phone guy.
2. I never complained about the pricing because sam had discounted the other items I purchased besides my TT kit and I was hoping he would do the same for an exhaust.
3. You have blown me off on the phone when my drivers side turbo came shipped Unclocked which too me a lot longer to do the install and making me have to fab a part to make it work. I was just trying to figure out why things were not lining up and you swore it wasn't gtm's fault when in fact it was.
4. I called and spoke to you about a meth kit because you guys went about installing it into the intake ports instead of the intake tubes and before I ordered I wanted more info on that. Again you blew me off and I heard nothing.
5. 5 years ago I spent over 10k on a built motor from your company and with what I have spent currently on my 370z Iam over 20k.
6. I ordered your 3 inch down pipes about you assured me it would bolt up to any 2.5 exhaust and later I found that was not true and had to have a reducer welded in to make it fit. That's why I have been sending emails and calling about your 3' exhaust.

So if your asking me why I not so happy with your place of business it is because I have invested in your company over the past 5 years only to be blown off and disrespected in the process. You can get on here and act like the perfect business but the fact is after money is spent with gtm customer service go downhill. I know I don't speak for everyone here and but business relationship started good with you guys too at the beginning. The truth is you guys are getting Too big for your own good and customer support is lacking. You guys have way too many things going on when you cant even keep up with your existing items your selling. What does that say? Sugar coat it anyway you like mike but there are the facts.
Good luck to your 100+ people who ordered the kit who will need customer support..

Quote:

Originally Posted by Mike@GTM

Harry,

You are being very disrespectful and certainly do not know us well enough to be making that kind of statement. We have been very courteous to you and professional with you throughout all our business transactions. We are not "blowing you off" as you describe. Every time you call, we answer. Every time you had a request on anything, we reply to you. We are in the business of selling parts and taking care of customers. Why would we blow you off?

When you bought a Blitz boost controller online from another vendor and you were hitting 40psi of boost, you thought it was defective and bought another one from yet another online vendor. Then, when it did the same thing, you called us up and Sam walked you through installing it correctly. We helped you with a part that you didn't even buy from us and you have the nerve to imply that we have poor customer service? Really?

When you called to get our exhaust and complained about the price and the lead time, I told you that we are going to be getting our mandrel bender up and running and will be able to offer our exhaust to you at a better price with a faster turnaround. I told you that when we get it up and running that I would get in touch with you to let you know. You would call up every couple weeks asking the same question. I mean, I can only tolerate being a broken record for so long.

When you asked me about the meth kit, it was late in the afternoon on a Friday and I had an instruction manual that I needed to finish up for a customer and I explained to you that I needed to get that done. I also told you that you can purchase the kit from our website and it would be faster for you to do it that way rather than having me put a quote together for you. Considering that you are perfectly capable of purchasing two Blitz boost controllers from other vendors online, I honestly don't know what is holding you back from purchasing the methanol kit from our website.

Our customer support is unparalleled in this industry and there is always someone to talk to when you call and we are just a phone call away. If we don't meet your standards, I'm sorry. There is only so much we can do.

Ultimately, this is a thread about our new turbo kit and this isn't really the place for this sort of discussion. If you want to continue, please start a different thread.

-Mike

08-07-2013, 01:49 AM	#1262 (permalink)
NeverBoneStck A True Z Fanatic Join Date: Oct 2009 Location: Beaverton, Or Posts: 1,110 Drives: 2008 G37 S Rep Power: 17	Starting to see the cracks ...... __________________ Juiced! That is all you need to know !!

08-07-2013, 06:40 AM	#1263 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 14	I'm gonna be installing myself! My car is actually on stands and completely stripped apart, ready for the turbo kit to be installed. It's great having a beater car to drive around town. I'm gonna be planning to install the kit over a months time, It'll give me time to work with school and my job, as well as make sure I have all my extra parts in order. __________________ 2012 Pearl White 370Z GReddy Twin Turbo

08-07-2013, 07:28 AM	#1266 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29538	"This pricing will no longer be available once these kits are on the shelf and ready to ship. This is on a first come, first serve basis and the closing date of this offer will be determined in the next couple weeks." This makes me think so, but a quick phone call to Mike or Sam at GTM would answer all of your questions. A phone call, not PM or email. I've had issues emailing/PMing them, but they answered the phone every time I've called them. SPOHN and OMGiGOTaZ like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

08-07-2013, 07:42 AM	#1267 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Just call them. You will still get the price. I talked to them every other day. __________________

08-07-2013, 11:50 AM	#1271 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I don't hang on nuts. I hug them. Lol. Seriously I have some upgrades and working on some custom things and Mike has helped me a lot with very small things and proper tech info. Besides Z1, GTM has been about the only other shop willing to give there time with no rushing to get me off the phone. __________________

08-07-2013, 12:50 AM	#1261 (permalink)
mikey1600 Track Member Join Date: Jul 2010 Location: Brisbane, Australia Posts: 503 Drives: MY11 370z Black Rep Power: 15	On a brighter note! who else is super excited and doing the install themselves? Think I'll try get it all done in 1 weekend.

08-07-2013, 12:39 PM	#1272 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Everyone serves there purpose. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM Performance Engineering 370Z SUPERCHARGER KIT PRESS RELEASE	SAM@GTM	Forced Induction	1161	02-16-2014 08:21 PM
GTM Performance Engineering: Mild 7 A/T Twin Turbo Build	SAM@GTM	Forced Induction	37	12-11-2013 12:23 PM
GTM Performance Engineering: 370Z MHI Twin Turbo Pre-Release	SAM@GTM	Forced Induction	120	09-06-2013 06:21 PM
GTM Performance Engineering stage 2 600hp supercharger kits line-up press release	SAM@GTM	Forced Induction	305	09-27-2012 03:23 PM