You're not making it any easier for me. ;)

Almost at TIER 3 pricing!

1) showme99
2) Jordan11b
3) Mr. Q
4) mikey1600
5) blackonorange
6) Chemy
7) BeemaaZ
8) future370zzz
9) Btalont
10) Fearless_Z
11) Z370Z011
12) IPL 370GT
13) Akmcmahon
14) ZtoG37
15) djmac
16) Spiderrsx23 (myG37)
17) tower74
18) puckshaw
19) Infiniti370z
20) Alstann
21) Morterbooble
22) PureNick (myG37)
23) Neo187H
24) E_mares
25) Black Betty (myG37)
26) awightguy (myG37)
27) keng714
28) infamousstunna1 (myG37)
29) harbin9er (myG37)
30) nemesisG37s (myG37)
31) qnguyen018
32) justboughtaz
33) MX52Z
34) lilvi3tboyzz
35) 370zrider
36) 09nismo498
37) indyn
38) aBT
39) vo370z
40) "D"
41) cinfuax (myG37)
42) "Doug" (myG37)
43) jenko
44) dvt (myG37)
45) "S"
46) dimsler
47) khanhvu411
48)
49)
50)

OMG.. I am going to go broke soon...

I didn't see these questions get asked in this thread and if it was, I'm sorry in advance for missing it...

* Does this kit require any type of welding? Once I had a GReddy turbo kit on a different car and I had to get the BOV mount TIG welded to the pipe. Not a big deal, just curious.

* Is it possible to see the install documents? I like to get a better understanding of what I'm getting into with your kit before committing. Based on your other install guides, I'm very impressed; it's in color! I'm not used to that, haha.

* Since this is water-cooled, how does it source, tapping into the radiator piping? I like the provided oil pan with it integrated so that's great if I read that correctly. I think that's more reliable than the adapter kind that's 'piggy-backing' the oil drain bolt.

* I've never dealt with a water/oil cooled turbo. What's the life expectancy of these turbo seals compared to the standard oil cooled ones?

* Are there any other factory hosing or wiring that I need to be concerned about post installation from being too close to the hot side of the turbo housings and piping? I tend to wrap any in heat reflectors so I'm just checking!

* Are the BOVs negotiable in type even if paying the difference? It might be weird to some but I'm particular about the sound, chirping, or whatever. I don't like attracting attention.

* Is the oil cooler you sell (Item # GTM-00115-03-19M) fully compatible to this kit?

Thanks in advance!

Okay yal, I just sent my info to Mike. We are going to be one spot closer to tier three. You only live once so...live large and let the big dog eat....

OK. Here is the install manual http://www.gtmotorsports.com/Manuals...structions.pdf
you will not have to tap the oil pan so ignore that part.
No welding etc. Just go through the install manual and you should get a good idea.
You will need to buy and oil cooler and plugs. You also have the options of an internal or external waste gates. Go through some of the earlier posts. This should get you at least started.

but you and your car will be very happy!!!:driving:

What was the level of difficulty to install the kit from what you saw?

Since I wasn't there for the install, I really can't comment on how difficult it was. I've never installed a turbo kit and I don't plan to start now; I'll let GTM handle my install. I know that GTM has posted a copy of the install instructions for their Garrett kit earlier on (either in this thread or the group buy thread). Even though it is for one of their earlier kits, it should give you a rough idea of what is entailed for a turbo install. Just bear in mind that unlike the Garrett kit, the MHI kit doesn't require drilling/tapping into the engine block since it provides a pre-tapped oil pan spacer.

As far as what I saw, once the car has been put back together post-install, many of the kit's components are hidden from view. All you really see are portions of the piping. If you opted for the black powdercoated piping, this would be a pretty stealthy install. To get an idea of where some of the components are mounted, check out the pictures that GTM posted at the beginning of both this thread and the "TD05 16g test results" thread.

Yeah I've seen them I'm just trying to get a better picture for a DIY

Isn't that the install for the first twin turbo kit, not this one?

Yes from what Mike has told me you will not need to drop the motor, weld, cut, or modify anything. He is currently working on the manual and said as soon as he has it be will distribute it. From what I've gathered the hardest thing is taking off the stock headers.

Alright! We are now officially at TIER 3 PRICING!!!

Updated List:

1) showme99
2) Jordan11b
3) Mr. Q
4) mikey1600
5) blackonorange
6) Chemy
7) BeemaaZ
8) future370zzz
9) Btalont
10) Fearless_Z
11) Z370Z011
12) IPL 370GT
13) Akmcmahon
14) ZtoG37
15) djmac
16) Spiderrsx23 (myG37)
17) tower74
18) puckshaw
19) Infiniti370z
20) Alstann
21) Morterbooble
22) PureNick (myG37)
23) Neo187H
24) E_mares
25) Black Betty (myG37)
26) awightguy (myG37)
27) keng714
28) infamousstunna1 (myG37)
29) harbin9er (myG37)
30) nemesisG37s (myG37)
31) qnguyen018
32) justboughtaz
33) MX52Z
34) lilvi3tboyzz
35) 370zrider
36) 09nismo498
37) indyn
38) aBT
39) vo370z
40) "D"
41) cinfuax (myG37)
42) "Doug" (myG37)
43) jenko
44) dvt (myG37)
45) "S"
46) dimsler
47) khanhvu411
48) plumber dude
49) jesster009
50) Alkatraz (myG37)
51) Hotrodz
52)
53)
54)
55)
56)
57)
58)
59)
60)

I hate to say this. I really do. But I don't see all these people follow threw. Just being honest. I'm myself am about to pull the trigger but I really need to set my car up more and become a better track driver. Either way this kit is mine this year.

I'm figuring the same thing if 60 people sign up I bet 40 people actually buy it... But I threw my name on the list just now anyways