stillen supercharger to vsr top mounted turbo

Nissan370 · 11-04-2013, 01:00 PM

Wow omw to mir imports vs domestic my stock clutch started to slip like crazy lol
I can drive the car normal but any kinda booost and she slips like crazy

So whats a good clutch to go with or do I need to spend 2grand for the mult. Disc clutch
Or is that just over kill

Mr.Squeeze · 11-05-2013, 01:07 PM

Quote:

Originally Posted by Nissan370

Wow omw to mir imports vs domestic my stock clutch started to slip like crazy lol
I can drive the car normal but any kinda booost and she slips like crazy

So whats a good clutch to go with or do I need to spend 2grand for the mult. Disc clutch
Or is that just over kill

If you don't want to spend 2k on a clutch you can go with a Southbend TZR or similar clutch it will hold your power without a problem.

I still have my Southbend TZR sitting in my garage Pm if your interested .

Nissan370 · 01-04-2014, 07:10 PM

Thxs Santa i mean mr credit card lol
Getting the parts I need for spring

Clutch/flywheel and hd slave

Rear diff. Brushing from whiteline
Hope to kill that wheel hopping problem

I also got a wide band o2 sensor the gauge I mounted already

Once all this is installed I have a few small things to take care of then we can start tuning for 93 and e85

Not sure how much I can get with the 750cc injectors but I do have 900cc injectors also
To save money I will just work with these injectors and not go with the 1000cc injectors

Last not sure if I will need to up grade the maf to get to my 600rwhp mark we will see

Nissan370 · 01-16-2014, 10:42 AM

ok so made the appointment for monday to drop the car off to je import to have the
clutch/flywheel,csc, rear diff. brushings and wideband o2 sensor bung installed

after the clutch is broken in

we start the tuning march. (93 and e85)

also does anyone know what the rear axles on the 370z can hold ?

1slow370 · 01-16-2014, 11:26 AM

more than you can throw at them

Nissan370 · 01-16-2014, 12:17 PM

good to know because i dont want to have to pay for these:
The Driveshaft Shop | NISSAN 2009- 370Z / G37 1200HP Pro-Level Axles

COSMO · 01-16-2014, 12:55 PM

Been debating on the rear diff brushings but heard they are not easy to install...
Good deal on the VSR turbo, I have bobby building my long block now...

Nissan370 · 01-16-2014, 03:16 PM

Ya I will leave all that hard stuff to je imports lol
good deal on the long block are you going single or keeping the kit you have

TerribleONE · 01-16-2014, 03:26 PM

Quote:

Originally Posted by 1slow370

more than you can throw at them

That is definitely not true. However, the chances of the car hooking that well on the street is unlikely

COSMO · 01-16-2014, 04:04 PM

I have the gtm Stage II twin turbo kit...

1slow370 · 01-16-2014, 10:01 PM

Quote:

Originally Posted by TerribleONE

That is definitely not true. However, the chances of the car hooking that well on the street is unlikely

Terrible how many axles have you broken?

future370zzz · 01-30-2014, 02:30 PM

Quote:

Originally Posted by Nissan370

ok so made the appointment for monday to drop the car off to je import to have the
clutch/flywheel,csc, rear diff. brushings and wideband o2 sensor bung installed

after the clutch is broken in

we start the tuning march. (93 and e85)

also does anyone know what the rear axles on the 370z can hold ?

How's the e85 tune coming? I might go e85 in the summer.

Nissan370 · 01-31-2014, 05:04 AM

Well once I get the car back and break the clutch in we can start tuning in march
they found a bad power steering leak so all the hoses had to be replaced

Nissan370 · 02-02-2014, 06:29 PM

Got the car back Friday from the shop
Looks like they installed every thing but never toke the car out on a test drive

Half way home the clutch would not return to the top position and stops half way
Next day I can't even get the car into gear

Did a little research and decided to bleed the clutch. I got pressure back drive the car for 5mins then the clutch starts sticking again.

Looks like I will be calling them tomorrow to have my car tolled back to them and fixed

Joepro · 02-02-2014, 07:31 PM

You have to bleed the crap out of that thing...joe has a special bleeding procedure...I did not when I did mine but most say replace the master as well if you didn't.

11-04-2013, 01:00 PM	#151 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 15	Wow omw to mir imports vs domestic my stock clutch started to slip like crazy lol I can drive the car normal but any kinda booost and she slips like crazy So whats a good clutch to go with or do I need to spend 2grand for the mult. Disc clutch Or is that just over kill __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

01-04-2014, 07:10 PM	#153 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 15	Thxs Santa i mean mr credit card lol Getting the parts I need for spring Clutch/flywheel and hd slave Rear diff. Brushing from whiteline Hope to kill that wheel hopping problem I also got a wide band o2 sensor the gauge I mounted already Once all this is installed I have a few small things to take care of then we can start tuning for 93 and e85 Not sure how much I can get with the 750cc injectors but I do have 900cc injectors also To save money I will just work with these injectors and not go with the 1000cc injectors Last not sure if I will need to up grade the maf to get to my 600rwhp mark we will see __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out) Last edited by Nissan370; 01-04-2014 at 07:21 PM.

01-16-2014, 10:42 AM	#154 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 15	ok so made the appointment for monday to drop the car off to je import to have the clutch/flywheel,csc, rear diff. brushings and wideband o2 sensor bung installed after the clutch is broken in we start the tuning march. (93 and e85) also does anyone know what the rear axles on the 370z can hold ? __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out) Last edited by Nissan370; 01-16-2014 at 10:45 AM.

01-16-2014, 11:26 AM	#155 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	more than you can throw at them ANMVQ likes this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

01-16-2014, 12:17 PM	#156 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 15	good to know because i dont want to have to pay for these: The Driveshaft Shop \| NISSAN 2009- 370Z / G37 1200HP Pro-Level Axles __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

01-16-2014, 12:55 PM	#157 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	Been debating on the rear diff brushings but heard they are not easy to install... Good deal on the VSR turbo, I have bobby building my long block now...

01-16-2014, 03:16 PM	#158 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 15	Ya I will leave all that hard stuff to je imports lol good deal on the long block are you going single or keeping the kit you have __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

01-16-2014, 04:04 PM	#160 (permalink)
COSMO A True Z Fanatic Join Date: Dec 2012 Location: FL Posts: 1,816 Drives: 2012 Touring GTM TT Rep Power: 20	I have the gtm Stage II twin turbo kit...

01-31-2014, 05:04 AM	#163 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 15	Well once I get the car back and break the clutch in we can start tuning in march they found a bad power steering leak so all the hoses had to be replaced __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

02-02-2014, 06:29 PM	#164 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 15	Got the car back Friday from the shop Looks like they installed every thing but never toke the car out on a test drive Half way home the clutch would not return to the top position and stops half way Next day I can't even get the car into gear Did a little research and decided to bleed the clutch. I got pressure back drive the car for 5mins then the clutch starts sticking again. Looks like I will be calling them tomorrow to have my car tolled back to them and fixed __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

02-02-2014, 07:31 PM	#165 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	You have to bleed the crap out of that thing...joe has a special bleeding procedure...I did not when I did mine but most say replace the master as well if you didn't. GaleForce and COSMO like this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear Mounted Turbo (scratch build)	jnaut	Forced Induction	182	12-06-2012 10:20 AM
going to have a supercharger and a turbo on my Z	Fabio88	Forced Induction	71	07-11-2012 07:37 PM
Supercharger/Turbo kit...?	ATM_Patrik	Forced Induction	41	07-28-2011 08:53 AM
supercharger vs turbo	mfrunlimited	Forced Induction	5	06-03-2011 02:22 PM
Rear mounted turbo kit	Brazilbro	Forced Induction	64	06-29-2009 06:39 PM