stillen supercharger to vsr top mounted turbo

Hermitns · 06-04-2013, 01:42 PM

Quote:

Originally Posted by Chuck33079

Your point was completely wrong. Congratulations, you've seen a lot of cars. You're my hero. The shop didn't offer this as a custom build. It's a kit. They took his money and gave him nothing for six months. In no world is this ok. And you come in here trying to say it's ok because they make more money on other builds, so the OP can get his kit whenever they get around to it?

The point of the cars listing is that you chose to jab me because I saw "cool cars". Where do you see in ANY of the posts that VSR offered it as a mailorder kit? Someone in the thread stated VSR only does IN HOUSE INSTALLS and asked about the cost of auto shipping. AGAIN, without knowing the content of the calls between them we can only speculate. As for your ASSUMPTION "it's a kit"
read the following completely...in the last paragraph it CLEARLY STATES THIS IS EXCLUSIVELY IN HOUSE BUILD. ANYTHING related to this thread and customer service is between VSR and 370 ONLY regardless of what anyone believes about business 101 or customer service.

S&R 350z / 370z / G35 / G37 HR Single Turbo Kit

Thank you very much

Chuck33079 · 06-04-2013, 01:47 PM

You decided to chime in with some halfass explanation thet they're busy working on other cars, and that it probably wasn't an expensive enough build to warrant their full attention. It's obviously not "exclusively in house" if they're shipping a kit to the OP, now is it? They sold him a product and took his money. It's not unreasonable for him to expect the actual product to arrive at some point. You think this is ok for a business. I completely disagree.

Hermitns · 06-04-2013, 02:04 PM

Quote:

Originally Posted by Chuck33079

You decided to chime in with some halfass explanation thet they're busy working on other cars, and that it probably wasn't an expensive enough build to warrant their full attention. It's obviously not "exclusively in house" if they're shipping a kit to the OP, now is it? They sold him a product and took his money. It's not unreasonable for him to expect the actual product to arrive at some point. You think this is ok for a business. I completely disagree.

Like a bulldog keep attacking without knowing the whole scope. Do you read every word or just focus on that which makes your blood boil. I THOUGHT I tried to look at BOTH sides of the transaction and I NEVER said this was a good business practice. I even went thru the original posts and seperated out the specifics as written. MAYBE, just MAYBE 370 was persistent or persuesive enough to get VSR to ship a kit. AGAIN, we don't know, AGAIN you focus on a single aspect. MAYBE 370 (seeing as he has $$$ in his car and a tuner standing by) was looking at a potential business deal to buy kits and install them in his area. WE DON'T KNOW HOWEVER if it wasn't on the shelf, ready to ship kit, in stock in the warehouse, then sometimes sh1t happens. and sometimes when a supplier repeatedly stalls your order, week after week, you gotta break target lock, change your direction and give up on this particular business.
All this being said, I wonder what the comments here are gonna be if this kit puts up 550+ RWHP? Will it THEN have been worth the wait? The unsatisfactory customer service? Will others then BEG VSR to ship kits although it's listed as an IN HOUSE EXCLUSIVE? We'll have to wait and see won't we.

Hermitns · 06-04-2013, 02:09 PM

as to business practices for big profit...I wonder if Chip Foose still repairs door dings and sprays basic acrylic paints?

Chuck33079 · 06-04-2013, 02:10 PM

Ok, guy. You win. I focused too much on the whole "pay someone for something and only get a tiny part of it" part. It obviously wasn't supposed to take six months, because if it was the OP would not be surprised by it.

elperuano · 06-04-2013, 02:17 PM

Lol this guy is hilarious. No wonder nothing amazes me anymore.

Seems like he works for the shop or has some affiliation with the shop. The response are absolutely hilarious.

elperuano · 06-04-2013, 02:19 PM

Quote:

Originally Posted by Hermitns

Just making a point here chuck. As for "cool cars" I bet I've seen more and rarer in my 50 years than you have. Grew up in Detroit, Dads daily driver was a 64 GTO that was balanced and blueprinted by Delorean, street raced and drag strip until Chevy put big money into the 427 factory teams. Ever seen an original 53 vette with the FACTORY V-8 vin experimental #004. etc etc.
you want something now, get it off the shelf, you want something the shop doesn't usually do? You gotta wait. Or cancel your order and go the way "everyone else" has. Then you can be a "me-too" at the car shows.

not one of these guys that seems he needs to prove something on the intranet...

NitrousZ34 · 06-04-2013, 07:10 PM

I would have gotten a refund a long time ago. Sounds like they're just yanking your chain bro

Hermitns · 06-05-2013, 07:50 AM

I may be a bit more patient having gone thru a custom motorcycle phase and yes having been burned by both wait time and quality concerns. I'd also like to state that economics 101 trumps business 101 EVERY TIME. Supply and demand. If I have it and you want it bad enough, I can treat you like a hooker and you'll still bring me your money.

SRperformance · 06-05-2013, 10:06 AM

The customer is our first priority and has been kept in the loop. The kit was held up by the fabricator. Since the 370z application started to pick up, we needed to make jigs for all of the piping for orders to be shipped. Usually we do everything with the car here. Initially we used a outside fabricator and then recently completed the process of bringing on a inhouse fabricator. A few more parts from the powdercoater and he will have all of his stuff. The owner of VSR has even arranged to fly out personally to help with the install.

fonzo179 · 06-05-2013, 11:02 AM

Just wanted to say good, bad or ugly I appreciate the input from the FI community here in this forum. Before, I knew little to nothing about SC, TT, Single Turbo or whatever for the Z. But i've learned so much in such a short time. Thanks guys!

Getting so close to my (Polished) Stillen Supercharger/Headers and Berk HFC's!!!

I feel like it's 1997 again and I'm about to get Goldeneye 007 from the video game store

We have a couple of Viper V12s here in Fargo, and quite a few Cobras licking their chops - anxious to see what the Z is capable of! So ready for this! #ProjectSnakeEater179

Chuck33079 · 06-05-2013, 11:09 AM

Quote:

Originally Posted by fonzo179

Before, I knew little to nothing about SC, TT, Single Turbo or whatever for the Z. But i've learned so much in such a short time. Thanks guys!

Getting so close to my (Polished) Stillen Supercharger/Headers and Berk HFC's!!!

In this thread alone there's a pretty good reason why Stillen isn't the answer to pretty much any question.

G37Sam · 06-05-2013, 11:15 AM

Quote:

Originally Posted by fonzo179

I knew little to nothing about SC, TT, Single Turbo or whatever for the Z. But i've learned so much in such a short time. Thanks guys!

Getting so close to my (Polished) Stillen Supercharger/Headers and Berk HFC's!!!

You clearly still have a bit of learning to do

fonzo179 · 06-05-2013, 11:21 AM

Quote:

Originally Posted by G37Sam

You clearly still have a bit of learning to do

I see where you guys are coming from and a appreciate the input! For me, a lot of my mods were looked down upon before I got them. But they haven't given me any issue throughout the 47K+ miles I've had my Z.

People's bad experiences never spook me away because the lobotomy I got prevents such things

and quiets the voices

I was just trying to credit you guys for your contributions.

Chuck33079 · 06-05-2013, 11:26 AM

For about the same cost as the Stillen, gtm's mhi turbo kit will be a better performer. Stillens kit is by far the worst option for fi on a 370. There's hours of reading here on why. I won't derail this thread into a stillen vs the world anymore. But do some more research. Unless you need a CARB cert, there's no reason to go stillen.

06-04-2013, 01:47 PM	#62 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	You decided to chime in with some halfass explanation thet they're busy working on other cars, and that it probably wasn't an expensive enough build to warrant their full attention. It's obviously not "exclusively in house" if they're shipping a kit to the OP, now is it? They sold him a product and took his money. It's not unreasonable for him to expect the actual product to arrive at some point. You think this is ok for a business. I completely disagree. UNKNOWN_370 likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

06-04-2013, 02:09 PM	#64 (permalink)
Hermitns Base Member Join Date: Nov 2011 Location: Fla Posts: 143 Drives: 11 370 auto Rep Power: 14	. as to business practices for big profit...I wonder if Chip Foose still repairs door dings and sprays basic acrylic paints?

06-04-2013, 02:10 PM	#65 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Ok, guy. You win. I focused too much on the whole "pay someone for something and only get a tiny part of it" part. It obviously wasn't supposed to take six months, because if it was the OP would not be surprised by it. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent Last edited by Chuck33079; 06-04-2013 at 02:13 PM.

06-04-2013, 02:17 PM	#66 (permalink)
elperuano A True Z Fanatic Join Date: Oct 2011 Location: Southwest FL Posts: 1,374 Drives: G37S Rep Power: 29	Lol this guy is hilarious. No wonder nothing amazes me anymore. Seems like he works for the shop or has some affiliation with the shop. The response are absolutely hilarious. Chuck33079 likes this.

06-04-2013, 07:10 PM	#68 (permalink)
NitrousZ34 Banned Join Date: Apr 2012 Location: Canoga Posts: 505 Drives: Myself crazy Rep Power: 0	I would have gotten a refund a long time ago. Sounds like they're just yanking your chain bro elperuano likes this.

06-05-2013, 07:50 AM	#69 (permalink)
Hermitns Base Member Join Date: Nov 2011 Location: Fla Posts: 143 Drives: 11 370 auto Rep Power: 14	I may be a bit more patient having gone thru a custom motorcycle phase and yes having been burned by both wait time and quality concerns. I'd also like to state that economics 101 trumps business 101 EVERY TIME. Supply and demand. If I have it and you want it bad enough, I can treat you like a hooker and you'll still bring me your money. Stright_Drop likes this.

06-05-2013, 10:06 AM	#70 (permalink)
SRperformance Base Member Join Date: Jun 2012 Location: tampa Posts: 137 Drives: 2003 Z32 Rep Power: 14	The customer is our first priority and has been kept in the loop. The kit was held up by the fabricator. Since the 370z application started to pick up, we needed to make jigs for all of the piping for orders to be shipped. Usually we do everything with the car here. Initially we used a outside fabricator and then recently completed the process of bringing on a inhouse fabricator. A few more parts from the powdercoater and he will have all of his stuff. The owner of VSR has even arranged to fly out personally to help with the install.

06-05-2013, 11:02 AM	#71 (permalink)
fonzo179 A True Z Fanatic Join Date: May 2012 Location: A Fantasy World Posts: 1,707 Drives: 2014 Audi Q5 3.0T Rep Power: 21	Just wanted to say good, bad or ugly I appreciate the input from the FI community here in this forum. Before, I knew little to nothing about SC, TT, Single Turbo or whatever for the Z. But i've learned so much in such a short time. Thanks guys! Getting so close to my (Polished) Stillen Supercharger/Headers and Berk HFC's!!! I feel like it's 1997 again and I'm about to get Goldeneye 007 from the video game store We have a couple of Viper V12s here in Fargo, and quite a few Cobras licking their chops - anxious to see what the Z is capable of! So ready for this! #ProjectSnakeEater179

06-05-2013, 11:26 AM	#75 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	For about the same cost as the Stillen, gtm's mhi turbo kit will be a better performer. Stillens kit is by far the worst option for fi on a 370. There's hours of reading here on why. I won't derail this thread into a stillen vs the world anymore. But do some more research. Unless you need a CARB cert, there's no reason to go stillen. Mr.Squeeze, elperuano and luigi90210 like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear Mounted Turbo (scratch build)	jnaut	Forced Induction	182	12-06-2012 10:20 AM
going to have a supercharger and a turbo on my Z	Fabio88	Forced Induction	71	07-11-2012 07:37 PM
Supercharger/Turbo kit...?	ATM_Patrik	Forced Induction	41	07-28-2011 08:53 AM
supercharger vs turbo	mfrunlimited	Forced Induction	5	06-03-2011 02:22 PM
Rear mounted turbo kit	Brazilbro	Forced Induction	64	06-29-2009 06:39 PM