Forced Induction & 7AT 370z Info

DarkJak

Will try and find out this winter. Got the Vr30 trans in a couple months ago, and I ordered the Z1 Black Friday deal for their flex plate.
Need to get a driveshaft and transmission mount bracket next, and finally start working on the car again. (have a few projects lined up: rear brakes, more fueling changes, new seats)

__________________
@stupidtoycars | My track vids
09 7AT|MCS 2WNR|Topgunz Rotrex|Ecutek (Eugene)|Maxxis RC1|Titan-7 TS-5|OSG LSD|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler|Fismo|G-LOC R12/R10|Zeta III L|NLR Wing and Splitter|CJM Pan and Fuel Hat|Radium Surge Tank|AP Racing CP9668

Tractionless

If you don't want to do the simple cut and paint the OE bracket Godzilla has those as well as the driveshafts. Are you 100% sure the Z1 flex plate works with the VR trans.? Some aftermarkets do not for whatever reason.

__________________
Toys Not Tots

DarkJak

No, I'm not 100% sure and couldn't find confirmation either, but taking that gamble. At worst, I'll keep using the OEM one and sell the Z1.

__________________
@stupidtoycars | My track vids
09 7AT|MCS 2WNR|Topgunz Rotrex|Ecutek (Eugene)|Maxxis RC1|Titan-7 TS-5|OSG LSD|Rear Mount Derale Oil Cooler (WIP)+25 Trans Cooler|Fismo|G-LOC R12/R10|Zeta III L|NLR Wing and Splitter|CJM Pan and Fuel Hat|Radium Surge Tank|AP Racing CP9668

Tractionless

Depending your mileage you might want to grab another good condition OEM as they are known to crack. I picked one up on ebay for $65 or so in case my 100k unit is showing stress. I'll probably throw it in anyway since it has 40k less miles and looks pristine.

__________________
Toys Not Tots