Forced Induction & 7AT 370z Info

FrankEtier · 12-01-2021, 07:31 PM

Quote:

Originally Posted by rspray2000

I’ve seen 2-3 posts/articles that all claim the Red Sport is the same. My only wonder now is if I need to do billet flex plate as well. I’ve heard the DOJ billet one doesn’t fit with the swap whereas the FI does.

I have the billet FI flex plate. I read the stock one will fail with high hp. I assume that would apply to any 7AT since that is connection of crankshaft to transmission.

FrankEtier · 12-01-2021, 07:32 PM

Quote:

Originally Posted by rspray2000

Yup, $800 from eBay shipped from FL to MA.

Yeah, that pic looks identical to one on an eBay ad I had saved.

Z eliminator · 12-02-2021, 08:27 AM

I broke 2 stock flex plates. . i got the F1 flex plate, night and day difference in the plates.

Z

shadow85 · 06-09-2022, 10:59 PM

Looks like I may need a trans build soon.

My 7AT has started slipping. Going to try changing fluid and see if that helps.

Otherwise I will need to find a solution.

I don't know what to do. Should I get a Pure transmission, or Rjm, or IPT, or try the DCT conversion like SpecialtyZ is doing.

I am worried about the later one, because I don't know who in Australia would be capable of such a conversion.

CJM told me that it would take the most elite level auto electrician, possibly 80+ hours to do the wiring and setup for the DCT conversion on their own from scratch. Sounds a bit daunting. Not many options I have down here. Or just take a chance with a local performance trana builder.

Might really need to do something soon though.

14Q60awdSPORT · 06-10-2022, 07:55 AM

VR30 trans swap

FrankEtier · 06-10-2022, 08:51 AM

My VR30 Swap should be completed today. I'll post some pics once done. I ended up buying one off Ebay and a local shop is installing it. I need a lift in my garage for these type of things!!

rspray2000 · 06-10-2022, 03:10 PM

Quote:

Originally Posted by FrankEtier

My VR30 Swap should be completed today. I'll post some pics once done. I ended up buying one off Ebay and a local shop is installing it. I need a lift in my garage for these type of things!!

Awesome! I have a shop doing the same in 2 weeks when my supercharger is installed. I pointed them to the videos and articles I found, but I'd be really interested in know if your shop ran into issues if they hadn't performed before.

Remind me again - are you upgrading so you can turn up your boost, or just want more long-term peace of mind?

shadow85 · 06-10-2022, 08:15 PM

Even though the VR30 trans is stronger than the stock Z 7sp AT, I hear they will still fail after 600whp/600tq.

So what about future proofing for people who want to make atleast 800whp, will the VR30 suffice or do we need something stronger?

rspray2000 · 06-10-2022, 08:38 PM

Quote:

Originally Posted by shadow85

Even though the VR30 trans is stronger than the stock Z 7sp AT, I hear they will still fail after 600whp/600tq.

SOHO claims to have a VR trans holding 572 ftlbs. For superchargers, you’d probably have near 700 whp with that amount of torque. That would be plenty for me, as you’d essentially have 3 unusable gears in WOT at that point

FrankEtier · 06-11-2022, 11:36 AM

Quote:

Originally Posted by rspray2000

Awesome! I have a shop doing the same in 2 weeks when my supercharger is installed. I pointed them to the videos and articles I found, but I'd be really interested in know if your shop ran into issues if they hadn't performed before.

Remind me again - are you upgrading so you can turn up your boost, or just want more long-term peace of mind?

My stock vq37 7AT hasn’t failed yet but I figured I’d swap before it does.

rspray2000 · 07-14-2022, 06:33 PM

Quote:

Originally Posted by FrankEtier

My stock vq37 7AT hasn’t failed yet but I figured I’d swap before it does.

Welp mine is in. Shop did it for me and said it wasn’t too bad. It’s a shame to hide that beautiful new Aluminum driveshaft…. Still tuning the Supercharger parts, though.

rspray2000 · 07-26-2022, 09:36 PM

Quote:

Originally Posted by FrankEtier

My VR30 Swap should be completed today. I'll post some pics once done. I ended up buying one off Ebay and a local shop is installing it. I need a lift in my garage for these type of things!!

Have you logged your transmission temps? After cruising for a while on a 95 deg. day, then doing a 5.5k pull, I'm not seeing trans temps over 194 F. I don't have a trans cooler and am trying to gauge whether I might need one in the future. I'm thinking unless I do multi-lap HDPE, probably not necessary.

Tractionless · 07-08-2023, 07:01 PM

Any updates on DCT or VR installs and impressions?

Sed8u · 07-12-2023, 10:28 AM

This is a great thread. I’m pretty much at a crossroad with what I should do with my automatic as well. I’ve got a 2014 automatic touring Sport with all the fixings and top guns “original”air to air supercharger and I’ve been running reliably between 550 and 590 whp @14 to 15 psi for over a year . Currently I’m 570whp/ @14.4psi and 450ft-lbs torque

I attribute all of my healthy longevity to my incredible tuner, Harry @z-tuner in Bradenton and the fact that I don’t consistently abuse the car. I do drive it to work or daily drive it 3 days a week and my wife drives it occasionally around town. Car runs only on e85 which probably helps greatly.

Car has stock engine, stock transmission and the headers are stock, everything else is upgraded with all supporting coolers.

Having said all of this I assume it’s only a matter of time before the transmission fails and I would love more power for the occasional street race or track day.

I’ve been leaning more toward ipt transmission rebuild and then a new differential and 3.9 gears with new fly wheel. Would love to hear suggestions from anyone.

FrankEtier · 07-12-2023, 12:26 PM

Quote:

Originally Posted by rspray2000

Have you logged your transmission temps? After cruising for a while on a 95 deg. day, then doing a 5.5k pull, I'm not seeing trans temps over 194 F. I don't have a trans cooler and am trying to gauge whether I might need one in the future. I'm thinking unless I do multi-lap HDPE, probably not necessary.

I have a 25 row cooler that bypasses the stock cooler and uses -6AN lines all the way back to the transmission. So far this summer I have not seen over 175 degrees in any situation while driving the car and it's hot in DFW Texas.

12-02-2021, 08:27 AM	#348 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,658 Drives: 370 Z 7AT Sports Rep Power: 18	Flex Plate I broke 2 stock flex plates. . i got the F1 flex plate, night and day difference in the plates. Z rspray2000 likes this. __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

06-10-2022, 08:51 AM	#351 (permalink)
FrankEtier Base Member Join Date: Jul 2019 Location: McKinney, TX Age: 48 Posts: 143 Drives: 2014 370Z SC Rep Power: 11604	My VR30 Swap should be completed today. I'll post some pics once done. I ended up buying one off Ebay and a local shop is installing it. I need a lift in my garage for these type of things!! __________________ ‘14 Topgunz Speedworks Rotrex Supercharged VR30 7AT 370Z Magma Red. @liquid.magma

07-08-2023, 07:01 PM	#358 (permalink)
Tractionless A True Z Fanatic Join Date: Jan 2016 Location: Atlantic SE Posts: 1,237 Drives: '10 K23 ST 7AT Rep Power: 30525	Any updates on DCT or VR installs and impressions? __________________ Toys Not Tots

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
forced induction in australia	andylena	Australia/New Zealand	23	09-15-2016 12:52 PM
Forced Induction Reliability	spearfish25	Forced Induction	58	09-08-2013 12:14 PM
Forced induction	stiso	Northern California Region	8	11-28-2011 12:03 PM
Help don't want forced induction!!!!!	Mjthind	Engine & Drivetrain	64	05-04-2011 01:00 PM
Forced induction	Seth G	Forced Induction	13	04-09-2010 12:36 AM

06-09-2022, 10:59 PM	#349 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 917 Drives: 15' 370Z A/T AMM TT Rep Power: 24	Looks like I may need a trans build soon. My 7AT has started slipping. Going to try changing fluid and see if that helps. Otherwise I will need to find a solution. I don't know what to do. Should I get a Pure transmission, or Rjm, or IPT, or try the DCT conversion like SpecialtyZ is doing. I am worried about the later one, because I don't know who in Australia would be capable of such a conversion. CJM told me that it would take the most elite level auto electrician, possibly 80+ hours to do the wiring and setup for the DCT conversion on their own from scratch. Sounds a bit daunting. Not many options I have down here. Or just take a chance with a local performance trana builder. Might really need to do something soon though.

06-10-2022, 07:55 AM	#350 (permalink)
14Q60awdSPORT Base Member Join Date: May 2021 Location: washington Posts: 58 Drives: 14 Q60 awd SPORT Rep Power: 3358	VR30 trans swap

06-10-2022, 08:15 PM	#353 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 917 Drives: 15' 370Z A/T AMM TT Rep Power: 24	Even though the VR30 trans is stronger than the stock Z 7sp AT, I hear they will still fail after 600whp/600tq. So what about future proofing for people who want to make atleast 800whp, will the VR30 suffice or do we need something stronger?