Fast Intentions "Twin Turbo Kit" is here

2SOONJR · 04-04-2015, 12:22 PM

Quote:

Originally Posted by jwick

I'm more concerned about direct line of site melting issues from the insane heat generated from the hot side. On a factory NA car there is minimal shielding because they didn't design for turbo levels of heat. I didn't bag for any performance reasons. Of course I went full retard on heat management all over my build.

Yeah I'm more concerned about hot spots on the engine more than performance. A big reason for gasket failure is hot spots I've read. Also, everything else close would be more subject to melting.

Quote:

Originally Posted by conmam

For Fast intention TT set up, I would go with their provided heat shield and ceramic coat both the exhaust manifolds + the turbines.

I'd still grab all of it. Ceramic coat and bag em. Especially considering the location of the turbos. This isn't just FI's kit either, most the kits out there have the turbo running just off the manifold but the Z turbos are a bit tucked away under everything, giving me more reason to grab a bag.

Sent from my XT1030 using Tapatalk

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions 3" (Twin Turbo) exhaust is here!	F.I. Inc.	Intake/Exhaust	91	02-08-2017 05:09 AM
Fast Intentions "Twin Turbo Kit" Official Release	F.I. Inc.	Drivetrain/Engine	95	11-19-2014 11:38 PM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 12:02 PM
GTM Motorsports Twin Turbo vs Greddy Twin Turbo Kit	Nismo221	Forced Induction	57	08-16-2011 04:44 PM

*****Fast Intentions "Twin Turbo Kit" is here*****

Fast Intentions "Twin Turbo Kit" is here