Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Forced Induction (http://www.the370z.com/forced-induction/)
-   -   *****Fast Intentions "Twin Turbo Kit" is here***** (http://www.the370z.com/forced-induction/65737-fast-intentions-twin-turbo-kit-here.html)

Hotrodz 01-09-2014 01:48 PM

I feel ya bro...it's damn hard to stay out boost because it's just begs you to go there!

cycy89 01-09-2014 03:12 PM

Just got off the phone with Tony and finalized last few details. It is so close and I can almost smell it! Hopefully you guys come up with something amazing with the automatic transmission to go with this amazing tt kit!

Ps Texas dmv declined my license plate TT*Z apparently it's inappropriate... I even sent an appeal letter. Bastards now I have to pick a new plate...

Sent from my SGH-M919 using Tapatalk

F.I. Inc. 01-09-2014 03:35 PM

Quote:

Originally Posted by cycy89 (Post 2643834)
Just got off the phone with Tony and finalized last few details. It is so close and I can almost smell it! Hopefully you guys come up with something amazing with the automatic transmission to go with this amazing tt kit!

Ps Texas dmv declined my license plate TT*Z apparently it's inappropriate... I even sent an appeal letter. Bastards now I have to pick a new plate...

Sent from my SGH-M919 using Tapatalk

CA DMV did the same thing to me...twice!

jofro6 01-09-2014 03:49 PM

NY must either be less strict, or just not smart enough to pick up on it... my friend had an Audi TT back a few years ago. His plate was SHOURTTS (show your TTs) It was great lol

showme99 01-09-2014 04:29 PM

Quote:

Originally Posted by nklear (Post 2643608)
so far so good ;). Everything is holding up. Clutch is amazing. The cool thing about Fast Intentions is that they did their research and development. I dropped off a vehicle and got a race car back. Fast Intentions did not just install the Twin Turbo Kit. Fast Intentions found the right clutch for me to be able to put the power down. They also found the right bushings for the differential to eliminate wheel hop. We spend time figuring out what boost controller I want, what exhaust I want, and what wide-band I need. When I picked up the car, Fast Intentions spend an hour or two showing me how to property use the car. They took me on a test drive and showed me everything I need to know about the turbo's, the new clutch, and the boost controller. Also when I picked up my car it was detailed in and out, I got it back completely spotless, engine bay was also clean and detailed. Quality and Support is outstanding, The best I've ever had from any performance shop.

That is truly some top-notch customer service. It always impresses me when companies go above and beyond for their clients. Well done F.I. and Specialty Z. :tiphat:

Bobthewomtad 01-09-2014 04:47 PM

I wish my kit wasn't so far down the line >.<. My Z should be the first of the kind on the east coast, at least I have that going for me. Now I need to go buy a Go Pro... >.>

nklear 01-09-2014 08:10 PM

Quote:

Originally Posted by F.I. Inc. (Post 2643862)
CA DMV did the same thing to me...twice!

haha I have NKLEAR and NCLEAR :)

https://scontent-a-lax.xx.fbcdn.net/...12688515_n.jpg

Fast Intentions are Everywhere. Even on my m5.

faceglide 01-09-2014 08:23 PM

Be right back. Talking to dmv about securing NQLEAR for my passat tdi. Guess well..my daily it's BOOSTED haha I got that torque.



Sent from my SAMSUNG-SGH-I337 using Tapatalk

F.I. Inc. 01-11-2014 08:39 PM

Update,

There are 2 dyno charts of Nklear's car below. The first on 91 octane. The second showing a comparison between 91 octane and a 91/100 Octane mixture with 2 additional psi. I highlighted where the car made peak torque. Rest assured anyone who thought there might be turbo lag, there is none!

This car is equipped with our "Stage 1+" TT Kit...


http://i371.photobucket.com/albums/o...ps8149f96f.jpg

http://i371.photobucket.com/albums/o...ps473a8048.jpg

Thank you, Tony

zeeder 01-11-2014 09:00 PM

That torque curve looks NICE!

TopgunZ 01-12-2014 12:39 AM

Quote:

Originally Posted by zeeder (Post 2647196)
That torque curve looks NICE!

Hell ya it does! That line is up there quick and is horizontal. Looks like full boost pretty much by 2800 =-O. This is what put me in the buy. Can't wait!

F.I. Inc. 01-12-2014 01:22 AM

I edited my post from earlier tonight with this additional dyno chart showing the comparison between the 2 fuels and boost levels.

http://i371.photobucket.com/albums/o...ps473a8048.jpg

Thanks, Tony

faceglide 01-12-2014 01:51 AM

Quote:

Originally Posted by nklear (Post 2643543)
I am already on the 2nd set of tires.

Looking at this graph, you should order your 3rd set. That spool from 2200-3000.....$$$$:happydance:

So I am thinking of just pissing away my re11s and rolling in some R888s and a set of 18s+Drag Radials(for derping at the 1/4)....looking at this, if someone farts on my gas pedal im breaking loose:rofl2:

Oh Tony, tell Dan hes a dirty, dirty man.

nklear 01-12-2014 06:25 PM

Quote:

Originally Posted by faceglide (Post 2647481)
Looking at this graph, you should order your 3rd set. That spool from 2200-3000.....$$$$:happydance:

So I am thinking of just pissing away my re11s and rolling in some R888s and a set of 18s+Drag Radials(for derping at the 1/4)....looking at this, if someone farts on my gas pedal im breaking loose:rofl2:

Oh Tony, tell Dan hes a dirty, dirty man.

Way ahead of you :bowrofl::roflpuke2:

roplusbee 01-12-2014 07:52 PM

You guys are not making it any easier to resist dumping my Greddy setup for the Fast Intentions kit. Sad part is that I should have just waited it out.

Hotrodz 01-12-2014 07:59 PM

You better not read my review then...:owned:

roplusbee 01-12-2014 09:36 PM

Too late. I read it twice just to be sure, lol....

Hotrodz 01-12-2014 10:49 PM

Here is looking forward to you joining our team..:icon17:

cycy89 01-13-2014 03:54 PM

1 Attachment(s)
Ok let's try this again...

Sent from my SGH-M919 using Tapatalk

Apoc370z 01-13-2014 04:06 PM

Quote:

Originally Posted by nklear (Post 2643608)
so far so good ;). Everything is holding up. Clutch is amazing. The cool thing about Fast Intentions is that they did their research and development. I dropped off a vehicle and got a race car back. Fast Intentions did not just install the Twin Turbo Kit. Fast Intentions found the right clutch for me to be able to put the power down. They also found the right bushings for the differential to eliminate wheel hop. We spend time figuring out what boost controller I want, what exhaust I want, and what wide-band I need. When I picked up the car, Fast Intentions spend an hour or two showing me how to property use the car. They took me on a test drive and showed me everything I need to know about the turbo's, the new clutch, and the boost controller. Also when I picked up my car it was detailed in and out, I got it back completely spotless, engine bay was also clean and detailed. Quality and Support is outstanding, The best I've ever had from any performance shop.

I am highly offended, they didnt detail my car in and out after they installed my exhaust :mad:

but on a more serious note, it is without a doubt that their service, craftsmanship, and reputation are best in the business, Tony and Blake always been patient and answer my questions every time i called.

I have been following this thread ever since it started, now i am deciding whether i should go on a ramen noodle diet to save up for this kit. But then i chose an auto as my DD, my fat foot will probably blow the trans if i am not driving it correctly

Ron 01-13-2014 04:17 PM

Just dropping by to say hi Tony. Glad to see the kit is doing so well! If I didn't have one already there's no doubt this is what I would get. Congrats!

PS: My friend went MIA and hasn't said anything back on the exhaust. I'll let you know.

TerribleONE 01-13-2014 07:25 PM

http://www.youtube.com/watch?v=NhQVoJYJ-n4

cycy89 01-13-2014 07:46 PM

Quote:

Originally Posted by TerribleONE (Post 2649606)

more plz

mfeinst 01-13-2014 08:16 PM

Quote:

Originally Posted by TerribleONE (Post 2649606)

Should be titled "Trying to gain traction drive-by"

Hotrodz 01-13-2014 08:55 PM

Tires, tires, tires and more tires...:driving:

rcdash 01-14-2014 11:16 PM

Trying to get more information on the Tial "alpha" compressor housing (mentioned as an option for this kit) - if anyone by chance has a link to more info (I do not see it on the Tial website). Thanks!

mfeinst 01-14-2014 11:24 PM

Quote:

Originally Posted by rcdash (Post 2652071)
Trying to get more information on the Tial "alpha" compressor housing (mentioned as an option for this kit) - if anyone by chance has a link to more info (I do not see it on the Tial website). Thanks!

I think they're used on some aftermarket Porsches but I'm completely guessing based off the little bit of info I found:

Tial Alpha 30 A30 A3076 or A3071 GT Turbo&apos;s Porsche 996TT 997TT GT2 Turbo | eBay

Tial Sport Alpha 28 A28 GT Turbo&apos;s Turbochargers Porsche 996TT 997TT Turbo GT2 | eBay

rcdash 01-16-2014 01:54 PM

^ thanks for the links. I am not certain how the HTA upgrade (GTX2867 vs HTA2868 has been compared in detail on other platforms) or the new compressor cover will really add any benefit. Always try to keep an open mind considering I'm currently running the GTX2867 (and I'm certainly not complaining about those turbos! 800 whp at redline and spool at 3500 is not bad at all.)

TerribleONE 01-16-2014 02:50 PM

Quote:

Originally Posted by mfeinst (Post 2649666)
Should be titled "Trying to gain traction drive-by"

Lol! Definitely requires a light foot in the first 2 gears if you don't want to spin. 3rd hooks great

Quote:

Originally Posted by Hotrodz (Post 2649756)
Tires, tires, tires and more tires...:driving:

We need to buy in bulk!

DEpointfive0 01-16-2014 02:56 PM

Quote:

Originally Posted by TerribleONE (Post 2654641)
Lol! Definitely requires a light foot in the first 2 gears if you don't want to spin. 3rd hooks great

One of you guys should swap with me for my auto diff that has less aggressive gearing, especially because I'm in SoCal by FI and SZ

F.I. Inc. 01-16-2014 04:43 PM

Welcome to the newest member to join the family...hurahn!

Presale list:

001: djtodd
002: VSS370z
003: cycy89 (Arrived, awaiting installation)
004: dirTy_shoeZ (Delivered)
005: faceglide (Almost completed)
006: TopgunZ
007: nklear (Installed)
008: mfeinst (Arrived, awaiting installation)
009: Rid3_FaM0uS
010: armbar3
011: hjo1078
012: RDZ Motorsports
013: gendr777
014: Forged Performance
015: HotRodz (Installed)
016: Gasdoc
017: Arrvaxx
018: Seb@SZ
019: hurahn


Thank you all for your business, support and CONTINUED PATIENCE. You will not be disappointed! Anyone else who has any questions or would like to place an order, please do not hesitate to contact me directly.

Tony

F.I. Inc. 01-16-2014 04:45 PM

Quote:

Originally Posted by rcdash (Post 2652071)
Trying to get more information on the Tial "alpha" compressor housing (mentioned as an option for this kit) - if anyone by chance has a link to more info (I do not see it on the Tial website). Thanks!

Raj,

I just tried calling you. Don't know if you have them same number that I have on file from 2007. Give me a ring at the shop. I will go over the comparisons with you.

Thank you, Tony

F.I. Inc. 01-16-2014 04:48 PM

Quote:

Originally Posted by rcdash (Post 2654576)
^ thanks for the links. I am not certain how the HTA upgrade (GTX2867 vs HTA2868 has been compared in detail on other platforms) or the new compressor cover will really add any benefit. Always try to keep an open mind considering I'm currently running the GTX2867 (and I'm certainly not complaining about those turbos! 800 whp at redline and spool at 3500 is not bad at all.)

I want to reply to this however at this time I do not have all of the comparison information directly front of me. Shortly I will do a full write up on the comparison of the different options. Pressure ratio, inducer/exducer size, wheel diameter, blade count, etc, etc.

Thank you all for your patience.

Thank you, Tony

rcdash 01-16-2014 05:07 PM

Quote:

Originally Posted by F.I. Inc. (Post 2654809)
Raj,

I just tried calling you. Don't know if you have them same number that I have on file from 2007. Give me a ring at the shop. I will go over the comparisons with you.

Thank you, Tony

lol u still have my # from my exhaust purchase in 2007!? Same # but doesn't work well when I'm at work... Thanks for the time on the phone today. Very cool stuff in the works. :tup:

TerribleONE 01-16-2014 05:22 PM

Quote:

Originally Posted by F.I. Inc. (Post 2654806)
Welcome to the newest member to join the family...hurahn!

Presale list:

000: Terribleone (Installed and running like a raped ape)
001: djtodd
002: VSS370z
003: cycy89 (Arrived, awaiting installation)
004: dirTy_shoeZ (Delivered)
005: faceglide (Almost completed)
006: TopgunZ
007: nklear (Installed)
008: mfeinst (Arrived, awaiting installation)
009: Rid3_FaM0uS
010: armbar3
011: hjo1078
012: RDZ Motorsports
013: gendr777
014: Forged Performance
015: HotRodz (Installed)
016: Gasdoc
017: Arrvaxx
018: Seb@SZ
019: hurahn


Thank you all for your business, support and CONTINUED PATIENCE. You will not be disappointed! Anyone else who has any questions or would like to place an order, please do not hesitate to contact me directly.

Tony

Fixed!

XwChriswX 01-16-2014 05:26 PM

Quote:

Originally Posted by TerribleONE (Post 2654872)
Fixed!

And by what means did you determine how a "raped ape" runs?? :ugh2:


:icon08: :stirthepot:

TopgunZ 01-16-2014 06:09 PM

Prevent Rape! Just say yes.....


While im here ill let Tony know I have secured a car lift and plan to just drop the motor on some stands. Thinking I can do the whole install with a buddy in 3 days of non-stop fun. A Southbend stage 3 clutch arrived at my doorstep last night. Still need to order the Zspeed CSC.

mfeinst 01-16-2014 06:10 PM

Quote:

Originally Posted by XwChriswX (Post 2654878)
And by what means did you determine how a "raped ape" runs?? :ugh2:


:icon08: :stirthepot:


Exactly.

F.I. Inc. 01-18-2014 09:57 AM

Quote:

Originally Posted by TopgunZ (Post 2654913)
Prevent Rape! Just say yes.....


While im here ill let Tony know I have secured a car lift and plan to just drop the motor on some stands. Thinking I can do the whole install with a buddy in 3 days of non-stop fun. A Southbend stage 3 clutch arrived at my doorstep last night. Still need to order the Zspeed CSC.

Great news! You should be able to tackle it in 3 long days worth of solid work, no interruptions of course!

Thanks, Tony

faceglide 01-23-2014 09:57 AM

It must suck to be an ape right now.....

Welcome hurahn, all your wildest shall come true!


All times are GMT -5. The time now is 10:00 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2